Tool Steels are six groups of tool steel:

Water Hardening Tool Steel

Cold Work Tool Steel

Shock Resisting Tool Steel

High Speed Tool Steel

Hot Work Tool Steel

Special Purpose / Plastic Mold tool Steel

The choice of group to select depends on, cost, working temperature, required surface hardness, strength, shock resistance, and toughness requirements. The more severe the service condition (higher temperature, abrasiveness, corrosiveness, loading), the higher the alloy content and consequent amount of carbides required for the tool steel.

1. Water-hardening group

Named from its essential property of having to be water quenched. This group of tool steel is essentially plain high carbon steel. It is commonly used because of its low cost.

W-group tool steel gets its name from its defining property of having to be water quenched. W-grade steel is essentially high carbon plain-carbon steel. This group of tool steel is the most commonly used tool steel because of its low cost compared to others. They work well for small parts and applications where high temperatures are not encountered; above 150 °C (302 °F) it begins to soften to a noticeable degree. Its hardenability is low, so W-group tool steels must be subjected to a rapid quenching, requiring the use of water. These tool steels can attain high hardness (above HRC 66) and are rather brittle compared to other tool steels. W-steels are still sold, especially for springs, but are much less widely used than they were in the 19th and early 20th centuries. This is partly because W-steels warp and crack much more during quench than oil-quenched or air hardening steels.

2. Cold-work group

This is a group of three tool steels: oil-hardening, air-hardening, and high carbon-chromium. The steels in the group have high hardenability and wear resistance, with average toughness. Typically they are in the production of larger parts or parts that have a minimum distortion requirement when being hardened.

Both Oil quenching and Air-hardening both reduce the distortion and higher stress caused by the quick water quenching.Because of this they are less likely to crack.

2.1. Oil-hardening

A very common oil hardening steel is O1 steel. It is a very good cold work steel and also makes very good knives and forks. It can be hardened to about 57-61 HRC.

2.2. Air-hardening

The first air-hardening grade tool steel was mushet steel, which was known as air-hardening steel at the time.

Modern air-hardening steels are characterized by low distortion during heat treatment because of their high-chromium content. Their machinability is good and they have a balance of wear resistance and toughness (i.e. between the D- and shock-resistant grades).

2.3. High carbon-chromium,

2.3.1. D-type

The D-type, of the cold-work class of tool steels, contain between 10% and 13% chromium. These steels retain their hardness up to a temperature of 425 °C (797 °F). Common applications for these tool steels include forging dies, die-casting die blocks, and drawing dies. Due to their high chromium content, certain D-type tool steels are often considered stainless or semi-stainless, however their corrosion resistance is very limited due to the precipitation of the majority of their chromium and carbon constituents as carbides.

D2 Tool Steel is very wear resistant but not as tough as lower alloyed steels. The mechanical properties of D2 are very sensitive to heat treatment. It is widely used for the production of shear blades, planer blades and industrial cutting tools; sometimes used for knife blades.

A - A2 – A10 Air hardening, Medium alloys

D - D2 – D7 High carbon, high chromium

O - O1 – O7 Oil hardening, Low carbon

ISO 1.2767, also known as DIN X 45 NiCrMo 4, AISI 6F7, and BS EN 20 B, is an air-hardening tool steel with a primary alloying element of nickel. It possesses good toughness, stable grains, and is highly polishable. It is primarily used for dies in plastic injection molding application that involve high stresses. Other applications include blanking dies, forging dies, and industrial blades.

The following steel grades are also in cold work steel group.

AISI H Hardened Steel

AISI H10 Hardened Steel

AISI H11 Hardened Steel

AISI h12 Hardened Steel

AISI H13 Hardened Steel

AISI H14 Hardened Steel

AISI H16 Hardened Steel

AISI H19 Hardened Steel

AISI H23 Hardened Steel

AISI H20 Hardened Steel

AISI H21 Hardened Steel

AISI H22 Hardened Steel

AISI H24 Hardened Steel

AISI H25 Hardened Steel

AISI H26 Hardened Steel

AISI H15 Hardened Steel

AISI H41 Hardened Steel

AISI H42 Hardened Steel

AISI H43 Hardened Steel

3. Special purpose group / Plastic Mold Steel

P-type tool steel is short for plastic mold steels. They are designed to meet the requirements of zinc die casting and plastic injection molding dies. Common steel grades like P20, 420 etc.

L-type tool steel is short for low alloy special purpose tool steel. L6 is extremely tough.

F-type tool steel is water hardened and substantially more wear resistant than W-type tool steel.

Hot Work Tool Steel

Cold Work Tool Steel

Plastic Mould Steel

Quenched and Tempered Alloy Steels

Carbon Steel

Bearing Steel and Gear Steel

High Speed Steel

AISI M3 CLASS2 High Speed Tool Steels

UNS T11323 M3 CLASS2 tool steel-ASTM A600-1999

UNS T11323 | AISI M3 CLASS2 steel

M3 CLASS2/UNS T11323/A600

S 6-5-3 / 1.3344

CW6Mo5Cr4V3 SKH53

HS6-5-3

BM3 CLASS2

HS 6-5-3

Alloy Steel UNS T11323 | M3 CLASS2 High Speed Tool Steel

HSS Steel Material UNS T11323 | M3 CLASS2

2725 High Speed Steel

AISI F

AISI F1 High carbon, low alloys

AISI F2

AISI F3 Tungsten

AISI L

AISI L1

AISI L3

AISI L7 Carbon > 0.65%, Chromium

AISI L2 Carbon <0.65%, Chromium

AISI L6 Carbon > 0.65%, Nickel

AISI S

AISI S1

AISI S3 Tungsten

AISI S2

AISI S4

AISI S5

AISI S6 Silicon

AISI S7 Chromium

AISI P

AISI P1

AISI P20

AISI P21 Low carbon mold steel

AISI W

AISI W1

AISI W2

AISI W3

AISI W4

AISI W5

AISI W6

AISI W7 High carbon water hardening steel

AISI W1 A – 1B Carbon

AISI W2 – AISI W3 Carbon Vanadium

AISI W4 – AISI W5 Carbon Chromium

AISI W7 Carbon Chromium Vanadium

AISI T4 Tool Steel

AISI T5 Tool Steel

AISI T6 Tool Steel

AISI T8 Tool Steel

AISI W1 Tool Steel

AISI W2 Tool Steel

AISI W5 Tool Steel

AISI A10 Tool Steel

AISI A6 Tool Steel

AISI A7 Tool Steel

AISI A8 Tool Steel

AISI A9 Tool Steel

AISI D3 Tool Steel

AISI D4 Tool Steel

AISI D5 Tool Steel

AISI D7 Tool Steel

AISI M10 High Speed Tool Steel

AISI M2 High Speed Tool Steel

AISI M3 High Speed Tool Steel

AISI M30 High Speed Tool Steel

AISI M33 High Speed Tool Steel

AISI M34 High Speed Tool Steel

AISI M36 High Speed Tool Steel

AISI M4 High Speed Tool Steel

AISI M46 High Speed Tool Steel

AISI M47 High Speed Tool Steel

AISI M6 High Speed Tool Steel

AISI M7 High Speed Tool Steel

4. Shock-resisting group

This class has high shock resistance and good hardenability. It is designed to resist shock at both low and high temperatures. It also has a very high impact toughness and relatively low abrasion resistance.

Carbide-forming alloys provide the necessary abrasion resistance, hardenability, and hot-work characteristics. This family of steels displays very high impact toughness and relatively low abrasion resistance and can attain relatively high hardness (HRC 58/60). In the US, toughness usually derives from 1 to 2% silicon and 0.5-1% molybdenum content. In Europe, shock steels often contain 0.5-0.6 % carbon and around 3% nickel. 1.75% to 2.75% nickel is still used in some shock resisting and high strength low alloy steels (HSLA), such as L6, 4340, and Swedish saw steel, but it is relatively expensive. An example of its use is in the production of jackhammer bits.

5. High speed group

T-type and M-type tool steels are used for cutting tools when strength and hardness must be retained at high temperatures.

High-speed steel (HSS or HS) is a subset of tool steels, commonly used in tool bits and cutting tools. It is often used in power-saw blades and drill bits. It is superior to the older high-carbon steel tools used extensively through the 1940s in that it can withstand higher temperatures without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high-speed steel. At room temperature, in their generally recommended heat treatment, HSS grades generally display high hardness (above HRC60) and abrasion resistance (generally linked to tungsten and vanadium content often used in HSS) compared with common carbon and tool steels.

AISI M High Speed Steel

AISI M1 High Speed Steel

AISI M7 High Speed Steel

AISI M10 High Speed Steel

AISI M30 High Speed Steel

AISI M33 High Speed Steel

AISI M34 High Speed Steel

AISI M42 High Speed Steel

AISI M43 High Speed Steel

AISI M46 High Speed Steel

AISI M47 High Speed Steel

AISI M2 High Speed Steel

AISI M3 High Speed Steel

AISI M4 High Speed Steel

AISI M6 High Speed Steel

AISI M15 High Speed Steel

AISI M35 High Speed Steel

AISI M36 High Speed Steel

AISI M41 High Speed Steel

AISI M44 High Speed Steel

AISI M45 High Speed Steel

AISI T High Speed Steel

AISI T1 High Speed Steel

AISI T2 High Speed Steel

AISI T3 High Speed Steel

AISI T7 High Speed Steel

AISI T9 High Speed Steel

AISI T4 High Speed Steel

AISI T5 High Speed Steel

AISI T6 High Speed Steel

AISI T8 High Speed Steel

AISI T15 High Speed Steel

6. Hot-working group

H-group tool steels were specifically developed to maintain strength and hardness while exposed to prolonged elevated temperatures.

Hot-working steels are a group of steel used to cut or shape material at high temperatures. H-group tool steels were developed for strength and hardness during prolonged exposure to elevated temperatures. These tool steels are low carbon and moderate to high alloy that provide good hot hardness and toughness and fair wear resistance due to a substantial amount of carbide. H1 to H19 are based on a chromium content of 5%; H20 to H39 are based on a tungsten content of 9-18% and a chromium content of 3–4%; H40 to H59 are molybdenum based.

Water Hardening Tool Steel

Cold Work Tool Steel

Shock Resisting Tool Steel

High Speed Tool Steel

Hot Work Tool Steel

Special Purpose / Plastic Mold tool Steel

AISI H Hardened Steel

AISI H10 Hardened Steel

AISI H11 Hardened Steel

AISI h12 Hardened Steel

AISI H13 Hardened Steel

AISI H14 Hardened Steel

AISI H16 Hardened Steel

AISI H19 Hardened Steel

AISI H23 Hardened Steel

AISI H20 Hardened Steel

AISI H21 Hardened Steel

AISI H22 Hardened Steel

AISI H24 Hardened Steel

AISI H25 Hardened Steel

AISI H26 Hardened Steel

AISI H15 Hardened Steel

AISI H41 Hardened Steel

AISI H42 Hardened Steel

AISI H43 Hardened Steel

Hot Work Tool Steel

Cold Work Tool Steel

Plastic Mould Steel

Quenched and Tempered Alloy Steels

Carbon Steel

Bearing Steel and Gear Steel

High Speed Steel

AISI M3 CLASS2 High Speed Tool Steels

UNS T11323 M3 CLASS2 tool steel-ASTM A600-1999

UNS T11323 | AISI M3 CLASS2 steel

M3 CLASS2/UNS T11323/A600

S 6-5-3 / 1.3344

CW6Mo5Cr4V3 SKH53

HS6-5-3

BM3 CLASS2

HS 6-5-3

Alloy Steel UNS T11323 | M3 CLASS2 High Speed Tool Steel

HSS Steel Material UNS T11323 | M3 CLASS2

2725 High Speed Steel

AISI M10 High Speed Tool Steel

AISI M2 High Speed Tool Steel

AISI M3 High Speed Tool Steel

AISI M30 High Speed Tool Steel

AISI M33 High Speed Tool Steel

AISI M34 High Speed Tool Steel

AISI M36 High Speed Tool Steel

AISI M4 High Speed Tool Steel

AISI M46 High Speed Tool Steel

AISI M47 High Speed Tool Steel

AISI M6 High Speed Tool Steel

AISI M7 High Speed Tool Steel

AISI F

AISI F1 High carbon, low alloys

AISI F2

AISI F3 Tungsten

AISI L

AISI L1

AISI L3

AISI L7 Carbon > 0.65%, Chromium

AISI L2 Carbon <0.65%, Chromium

AISI L6 Carbon > 0.65%, Nickel

AISI S

AISI S1

AISI S3 Tungsten

AISI S2

AISI S4

AISI S5

AISI S6 Silicon

AISI S7 Chromium

AISI P

AISI P1

AISI P20

AISI P21 Low carbon mold steel

AISI W

AISI W1

AISI W2

AISI W3

AISI W4

AISI W5

AISI W6

AISI W7 High carbon water hardening steel

AISI W1 A – 1B Carbon

AISI W2 – AISI W3 Carbon Vanadium

AISI W4 – AISI W5 Carbon Chromium

AISI W7 Carbon Chromium Vanadium

AISI T4 Tool Steel

AISI T5 Tool Steel

AISI T6 Tool Steel

AISI T8 Tool Steel

AISI W1 Tool Steel

AISI W2 Tool Steel

AISI W5 Tool Steel

AISI A10 Tool Steel

AISI A6 Tool Steel

AISI A7 Tool Steel

AISI A8 Tool Steel

AISI A9 Tool Steel

AISI D3 Tool Steel

AISI D4 Tool Steel

AISI D5 Tool Steel

AISI D7 Tool Steel

AISI M Tool Steel

AISI M1 Tool Steel

AISI M7 Tool Steel

AISI M10 Tool Steel

AISI M30 Tool Steel

AISI M33 Tool Steel

AISI M34 Tool Steel

AISI M42 Tool Steel

AISI M43 Tool Steel

AISI M46 Tool Steel

AISI M47 Tool Steel

AISI M2 Tool Steel

AISI M3 Tool Steel

AISI M4 Tool Steel

AISI M6 Tool Steel

AISI M15 Tool Steel

AISI M35 Tool Steel

AISI M36 Tool Steel

AISI M41 Tool Steel

AISI M44 Tool Steel

AISI M45 Tool Steel

AISI T Tool Steel

AISI T1 Tool Steel

AISI T2 Tool Steel

AISI T3 Tool Steel

AISI T7 Tool Steel

AISI T9 Tool Steel

AISI T4 Tool Steel

AISI T5 Tool Steel

AISI T6 Tool Steel

AISI T8 Tool Steel

AISI T15 Tool Steel

1.2365 Tool Steel

AISI H10 Tool Steel

4Cr3Mo3SiV Tool Steel

AISI H11 Tool Steel

AISI H12 Tool Steel

AISI H21 Tool Steel

AISI H22 Tool Steel

AISI H23 Tool Steel

AISI H24 Tool Steel

AISI H25 Tool Steel

AISI H26 Tool Steel

AISI H42 Tool Steel

AISI O1 Tool Steel

AISI O2 Tool Steel

1.2067 Tool Steel

102Cr6 Tool Steel

AISI D2 Tool Steel

AISI D4 Tool Steel

AISI S5 Tool Steel

AISI 4150 Tool Steel

D3 Tool Steel

D2 Tool Steel

01 Tool Steel

aisi 1144 Tool Steel

a6 Tool Steel

AISI A2 Tool Steel Tool Steel

Duplex UNS S31803 F51 Tool Steel

1.2767 Tool Steel

1.2842 90MnCrV8 Tool Steel

1.2510 100MnCrW4 Tool Steel

1.2379 X155CrVMo12-1 Tool Steel

1.2080 X210Cr12 Tool Steel

1.2363 X100CrMoV5-1 Tool Steel

1.2550 60WCrV7 Tool Steel

1.2436 Tool Steel

1.3343 S6-5-2 Tool Steel

1.3247 Tool Steel

1.2311 40CrMnMo7 Tool Steel

50CrV4 Tool Steel

AISI A10 Tool Steel Tool Steel

AISI A2 Tool Steel

M42 Tool Steel

M2 High Speed Steel Tool Steel

X45NiCrMo4 Tool Steel

P20 Tool Steel

S1 Tool Steel

A2 Tool Steel

D6 Tool Steel

D2 Tool Steel

O1 Tool Steel

Tool Steel Specifications Tool Steel

BH13 Tool Steel

X40CrMoV5-1 Tool Steel

SKD61 Tool Steel

M238 Tool Steel

HPM17 Tool Steel

PX4 Tool Steel

CLC2738 Tool Steel

P21 Tool Steel

718H Tool Steel

4Cr13MoV Tool Steel

1.2316 Tool Steel

10Ni3MnCuAl Tool Steel

3Cr2MoV Tool Steel

3Cr2Mo Tool Steel

P20 Tool Steel

X165CrMoV46 Tool Steel

2310 Tool Steel

X210Cr12 Tool Steel

SKD11 Tool Steel

Cr12Mo1V1 Tool Steel

BO1 Tool Steel

90MnWCrV5 Tool Steel

9Mn2V Tool Steel

9CrWMn Tool Steel

105WCr5 Tool Steel

1.2419 Tool Steel

10Cr9Mo1VNbN Tool Steel

F92-10 Tool Steel

F91-20 Tool Steel

P91 Tool Steel

SA-335 Tool Steel

SA-234 Tool Steel

F22 Tool Steel

F12 Tool Steel

P12 Tool Steel

P11 Tool Steel

SCM420 Tool Steel

SCM410 Tool Steel

2216 Tool Steel

30CD4 Tool Steel

4119 Tool Steel

4118 Tool Steel

2244 Tool Steel

708A42 Tool Steel

SCM440 Tool Steel

42CrMo Tool Steel

4140 Tool Steel

15NiCuMoNb5 Tool Steel

WB36 Tool Steel

2Cr12NiMoV Tool Steel

2Cr12NiMoWV Tool Steel

2304 Tool Steel

2303 Tool Steel

4Cr13 Tool Steel

3Cr13 Tool Steel

1.4028 Tool Steel

1.4021 Tool Steel

410 410S21 Tool Steel

1Cr18Ni9 Tool Steel

X5CrNiCuNb17-4 Tool Steel

0Cr17Ni4Cu4Nb Tool Steel

2.4983 Tool Steel

2.4650 Tool Steel

2.4975 Tool Steel

2.4858 Tool Steel

1.4876 Tool Steel

1.4980 Tool Steel

GH15 Tool Steel

530M40 Tool Steel

42C4 Tool Steel

41Cr4 Tool Steel

40Cr Tool Steel

1.7035 Tool Steel

8620 Tool Steel

SNCM220 Tool Steel

653M31 Tool Steel

30NC11 Tool Steel

SNC836 Tool Steel

30CrNi3 Tool Steel

2940 Tool Steel

40CAD6-12 Tool Steel

38CrMoAl Tool Steel

1.8509 Tool Steel

36CrNiMo4 Tool Steel

4340 Tool Steel

40CrNiMoA Tool Steel

1.6511 Tool Steel

55NiCrMoV6 Tool Steel

55NiCrMoV2 Tool Steel

SKT4 Tool Steel

5CrNiMo Tool Steel

2230 Tool Steel

50CV4 Tool Steel

SPS6 Tool Steel

SUP10 Tool Steel

665A12 Tool Steel

14NC12 Tool Steel

3310 Tool Steel

3415 Tool Steel

12CrNi2 Tool Steel

15CD4-05 Tool Steel

15CrMo5 Tool Steel

1.7262 Tool Steel

665M13 Tool Steel

3316 Tool Steel

SNC815 Tool Steel

24CrMoV55 Tool Steel

1.7733 Tool Steel

BH21 Tool Steel

X30WCrV9-3 Tool Steel

SKD7 Tool Steel

3Cr2W8V Tool Steel

11.2581 Tool Steel

32CrMoV12-28 Tool Steel

T20810 Tool Steel

4Cr3Mo3SiV Tool Steel

1.2365 Tool Steel

H11 Tool Steel

SKD6 Tool Steel

BO2 Tool Steel

T31502 Tool Steel

1.3299 Tool Steel

ASTM W108 Tool Steel

ASTM W109 Tool Steel

ASTM W110 Tool Steel

ASTM W112 Tool Steel

ASTM W209 Tool Steel

ASTM W210 Tool Steel

ASTM W310 Tool Steel

ASTM W4 Tool Steel

ASTM W5 Tool Steel

ASTM W6 Tool Steel

ASTM W7 Tool Steel

ASTM H10 Tool Steel

UNS T20810 Tool Steel

ASTM H11 Tool Steel

UNS T20811 Tool Steel

ASTM H12 Tool Steel

UNS T20812 Tool Steel

ASTM H13 Tool Steel

UNS T20813 Tool Steel

ASTM H14 Tool Steel

UNS T20814 Tool Steel

ASTM H19 Tool Steel

UNS T20819 Tool Steel

ASTM H21 Tool Steel

UNS T20821 Tool Steel

ASTM H22 Tool Steel

UNS T20822 Tool Steel

ASTM H23 Tool Steel

UNS T20823 Tool Steel

ASTM H24 Tool Steel

UNS T20824 Tool Steel

ASTM H25 Tool Steel

UNS T20825 Tool Steel

ASTM H26 Tool Steel

UNS T20826 Tool Steel

ASTM H41 Tool Steel

UNS T20841 Tool Steel

ASTM H42 Tool Steel

UNS T20842 Tool Steel

ASTM H43 Tool Steel

UNS T20843 Tool Steel

ASTM A2 Tool Steel

UNS T30102 Tool Steel

ASTM A3 Tool Steel

UNS T30103 Tool Steel

ASTM A4 Tool Steel

UNS T30104 Tool Steel

ASTM A5 Tool Steel

UNS T30105 Tool Steel

ASTM A6 Tool Steel

UNS T30106 Tool Steel

ASTM A7 Tool Steel

UNS T30107 Tool Steel

ASTM A8 Tool Steel

UNS T30108 Tool Steel

ASTM A9 Tool Steel

UNS T30109 Tool Steel

ASTM A10 Tool Steel

UNS T30110 Tool Steel

ASTM D2 Tool Steel

UNS T30402 Tool Steel

ASTM D3 Tool Steel

UNS T30403 Tool Steel

ASTM D4 Tool Steel

UNS T30404 Tool Steel

ASTM D5 Tool Steel

UNS T30405 Tool Steel

ASTM D7 Tool Steel

UNS T30407 Tool Steel

ASTM 01 Tool Steel

UNS T31501 Tool Steel

ASTM 02 Tool Steel

UNS T31502 Tool Steel

ASTM 06 Tool Steel

UNS T31506 Tool Steel

ASTM 07 Tool Steel

UNS T31507 Tool Steel

ASTM S1 Tool Steel

UNS T41901 Tool Steel

ASTM S2 Tool Steel

UNS T41902 Tool Steel

ASTM S4 Tool Steel

UNS T41904 Tool Steel

ASTM S5 Tool Steel

UNS T41905 Tool Steel

ASTM S6 Tool Steel

UNS T41906 Tool Steel

ASTM S7 Tool Steel

UNS T41907 Tool Steel

ASTM P2 Tool Steel

UNS T51602 Tool Steel

ASTM P3 Tool Steel

UNS T51603 Tool Steel

SAE P4 Tool Steel

UNS T51604 Tool Steel

ASTM P5 Tool Steel

UNS T51605 Tool Steel

ASTM P6 Tool Steel

UNS T51606 Tool Steel

UNS T51620 Tool Steel

ASTM P21 Tool Steel

UNS T51621 Tool Steel

ASTM F1 Tool Steel

UNS T60601 Tool Steel

ASTM F2 Tool Steel

UNS T60602 Tool Steel

ASTM L2 Tool Steel

UNS T61202 Tool Steel

ASTM L3 Tool Steel

UNS T61203 Tool Steel

SAE L6 Tool Steel

AISI A11 Tool Steel

SAE A11 Tool Steel

UNS T30111 Tool Steel

AISI L1 Tool Steel

SAE L1 Tool Steel

UNS T61201 Tool Steel

AISI L4 Tool Steel

SAE L4 Tool Steel

UNS T61204 Tool Steel

AISI L5 Tool Steel

SAE L5 Tool Steel

UNS T61205 Tool Steel

AISI L7 Tool Steel

SAE L7 Tool Steel

UNS T61206 Tool Steel

UNS T60603 Tool Steel

AISI P1 Tool Steel

SAE P1 Tool Steel

UNS T51601 Tool Steel

AISI G6 Tool Steel

SAE G6 Tool Steel

SAE 6F2 Tool Steel

AISI 6F2 Tool Steel

AISI 6F3 Tool Steel

SAE 6F3 Tool Steel

AISI 6F4 Tool Steel

SAE 6F4 Tool Steel

AISI 6F5 Tool Steel

SAE 6F5 Tool Steel

SAE 6F6 Tool Steel

AISI 6F6 Tool Steel

ASTM T1 Tool Steel

UNS T12001 Tool Steel

ASTM T2 Tool Steel

UNS T12002 Tool Steel

ASTM T5 Tool Steel

UNS T12005 Tool Steel

ASTM T6 Tool Steel

UNS T12006 Tool Steel

ASTM T8 Tool Steel

ASTM T15 Tool Steel

UNS T12015 Tool Steel

ASTM M1 Tool Steel

UNS T13101 Tool Steel

ASTM M2 Tool Steel

ASTM M2(C) Tool Steel

UNS T13102 Tool Steel

ASTM M3 Class1 Tool Steel

UNS T13113 Tool Steel

ASTM M3 Class2 Tool Steel

UNS T13123 Tool Steel

ASTM M4 Tool Steel

UNS T13104 Tool Steel

ASTM M6 Tool Steel

UNS T13106 Tool Steel

ASTM M7 Tool Steel

UNS T13107 Tool Steel

ASTM M10 Tool Steel

ASTM M10(C) Tool Steel

UNS T13110 Tool Steel

ASTM M30 Tool Steel

UNS T13130 Tool Steel

ASTM M33 Tool Steel

UNS T13133 Tool Steel

ASTM M34 Tool Steel

UNS T13134 Tool Steel

ASTM M36 Tool Steel

UNS T13136 Tool Steel

ASTM M41 Tool Steel

UNS T13141 Tool Steel

ASTM M42 Tool Steel

UNS T13142 Tool Steel

ASTM M43 Tool Steel

UNS T13143 Tool Steel

ASTM M44 Tool Steel

UNS T13144 Tool Steel

ASTM M46 Tool Steel

UNS T13146 Tool Steel

ASTM M47 Tool Steel

UNS T13147 Tool Steel

ASTM M48 Tool Steel

UNS T13148 Tool Steel

ASTM M62 Tool Steel

UNS T11362 Tool Steel

ASTM M50 Tool Steel

UNS T11350 Tool Steel

ASTM M52 Tool Steel

UNS T11352 Tool Steel

1.1554 Tool Steel

C110W Tool Steel

C110U Tool Steel

C125W Tool Steel

1.1563 Tool Steel

C135W Tool Steel

1.1573 Tool Steel

C135U Tool Steel

C70W2 Tool Steel

C80W2 Tool Steel

C105W2 Tool Steel

1.1730 Tool Steel

C45W Tool Steel

C45U Tool Steel

C60W Tool Steel

C60U Tool Steel

1.1744 Tool Steel

C67W Tool Steel

1.1750 Tool Steel

C75W Tool Steel

C55W Tool Steel

1.1820 Tool Steel

C85W Tool Steel

1.1830 Tool Steel

C85U Tool Steel

125Cr1 Tool Steel

1.2003 Tool Steel

75Cr1 Tool Steel

1.2004 Tool Steel

85Cr1 Tool Steel

1.2008 Tool Steel

140Cr3 Tool Steel

140Cr2 Tool Steel

1.2056 Tool Steel

90Cr3 Tool Steel

1.2057 Tool Steel

105Cr4 Tool Steel

1.2063 Tool Steel

145Cr6 Tool Steel

1.2083 Tool Steel

X42Cr13 Tool Steel

X40Cr14 Tool Steel

1.2085 Tool Steel

X33CrS16 Tool Steel

1.2103 Tool Steel

58SiCr8 Tool Steel

1.2108 Tool Steel

90CrSi5 Tool Steel

1.2109 Tool Steel

125CrSi5 Tool Steel

1.2127 Tool Steel

105MnCr4 Tool Steel

1.2129 Tool Steel

200CrMn8 Tool Steel

1.2162 Tool Steel

21MnCr5 Tool Steel

1.2201 Tool Steel

X165CrV12 Tool Steel

1.2206 Tool Steel

140CrV1 Tool Steel

1.2208 Tool Steel

31CrV3 Tool Steel

31CrV2 Tool Steel

1.2210 Tool Steel

115CrV3 Tool Steel

51CrMnV4 Tool Steel

1.2241 Tool Steel

1.2242 Tool Steel

59CrV4 Tool Steel

1.2243 Tool Steel

61CrSiV5 Tool Steel

1.2248 Tool Steel

38CrSiV6 Tool Steel

1.2249 Tool Steel

45CrSiV6 Tool Steel

1.2303 Tool Steel

100CrMo5 Tool Steel

1.2305 Tool Steel

102CrMo6 Tool Steel

1.2307 Tool Steel

29CrMoV9 Tool Steel

1.2311 Tool Steel

1.2312 Tool Steel

40CrMnMoS8-6 Tool Steel

X36CrMo16 Tool Steel

X36CrMo17 Tool Steel

1.2319 Tool Steel

X64CrMo14 Tool Steel

1.2327 Tool Steel

86CrMoV7 Tool Steel

1.2328 Tool Steel

45CrMoV7 Tool Steel

X6CrMo4 Tool Steel

X6CrMo 15-5 Tool Steel

1.2353 Tool Steel

27CrMoV6-12 Tool Steel

1.2361 Tool Steel

X9CrMoV8 Tool Steel

1.2362 Tool Steel

X63CrMoV5-1 Tool Steel

X100CrMo5 Tool Steel

X100CrMoV5-1 Tool Steel

1.2369 Tool Steel

81CrMoV42-16 Tool Steel

1.2376 Tool Steel

X96CrMoV12 Tool Steel

1.2378 Tool Steel

X220CrMoV12-2 Tool Steel

X155CrMoV12-1 Tool Steel

X153CrMo12-2 Tool Steel

1.2381 Tool Steel

73MoV5-2 Tool Steel

1.2414 Tool Steel

120W4 Tool Steel

1.2442 Tool Steel

115W8 Tool Steel

1.2453 Tool Steel

X130W5 Tool Steel

100MnCrW4 Tool Steel

1.2516 Tool Steel

120WV4 Tool Steel

1.2519 Tool Steel

110WCrV5 Tool Steel

1.2542 Tool Steel

45WCrV7 Tool Steel

60WCrV7 Tool Steel

1.2552 Tool Steel

80WCrV8 Tool Steel

1.2562 Tool Steel

142WV13 Tool Steel

1.2604 Tool Steel

73WCrMoV2-2 Tool Steel

1.2631 Tool Steel

X50CrMoW9-1-1 Tool Steel

1.2703 Tool Steel

74NiCr2 Tool Steel

1.2709 Tool Steel

X3NiCoMoTi18-9-5 Tool Steel

1.2710 Tool Steel

45NiCr6 Tool Steel

54NiCrMoV6 Tool Steel

1.2711 Tool Steel

55NiCr10 Tool Steel

1.2718 Tool Steel

1.2721 Tool Steel

50NiCr13 Tool Steel

15NiCr14 Tool Steel

1.2746 Tool Steel

45NiCrMoV16-16 Tool Steel

1.2762 Tool Steel

75CrMoNiW6-7 Tool Steel

1.2764 Tool Steel

X19NiCrMo4 Tool Steel

45NiCrMo16 Tool Steel

1.2823 Tool Steel

70Si7 Tool Steel

1.2826 Tool Steel

60MnSiCr4 Tool Steel

1.2833 Tool Steel

100V1 Tool Steel

1.2838 Tool Steel

145V33 Tool Steel

90MnCrV8 Tool Steel

1.2880 Tool Steel

X165CrCoMo12 Tool Steel

1.2884 Tool Steel

X210CrCoW12 Tool Steel

1.2082 Tool Steel

X21Cr13 Tool Steel

1.2309 Tool Steel

65MnCrMo4 Tool Steel

1.2313 Tool Steel

21MnCr10 Tool Steel

1.2323 Tool Steel

48CrMoV6-7 Tool Steel

1.2342 Tool Steel

X35CrMoV5-1-1 Tool Steel

X38CrMoV5-1 Tool Steel

1.2357 Tool Steel

50CrMoV13-14 Tool Steel

1.2360 Tool Steel

X48CrMoV8-1-1 Tool Steel

30WCrV15-1 Tool Steel

1.2564 Tool Steel

30WCrV17-2 Tool Steel

1.2567 Tool Steel

1.2603 Tool Steel

45CrVMoW5-8 Tool Steel

1.2606 Tool Steel

X37CrMoW5-1 Tool Steel

1.2622 Tool Steel

X60WCrMoV9-4 Tool Steel

X30WCrCoV9-3 Tool Steel

1.2678 Tool Steel

X45CoCrWv5-5-5 Tool Steel

1.2714 Tool Steel

56NiCrMoV7 Tool Steel

1.2726 Tool Steel

26NiCrMoV5 Tool Steel

1.2731 Tool Steel

DIN 1.3355 Tool Steel

DIN 1.3348 Tool Steel

DIN 1.3346 Tool Steel

DIN 1.3343 Tool Steel

DIN 1.3265 Tool Steel

DIN 1.3255 Tool Steel

DIN 1.3249 Tool Steel

DIN 1.3246 Tool Steel

DIN 1.3202 Tool Steel

DIN 1.2842 Tool Steel

DIN 1.2735 Tool Steel

DIN 1.2625 Tool Steel

DIN 1.2606 Tool Steel

DIN 1.2581 Tool Steel

DIN 1.2550 Tool Steel

DIN 1.2510 Tool Steel

DIN 1.2379 Tool Steel

DIN 1.2365 Tool Steel

DIN 1.2363 Tool Steel

DIN 1.2344 Tool Steel

DIN 1.2343 Tool Steel

DIN 1.2341 Tool Steel

DIN 1.2330 Tool Steel

DIN 1.2080 Tool Steel

JIS SKH9 Tool Steel

JIS SKH3 Tool Steel

JIS SKH2 Tool Steel

JIS SKH 4A Tool Steel

JIS SKD62 Tool Steel

JIS SKD61 Tool Steel

JIS SKD5 Tool Steel

AFNOR Z 40 COV 5 Tool Steel

AFNOR Z 38 CDV 5 Tool Steel

AFNOR Z 30 WCV 9 Tool Steel

AFNOR Z 200 C 12 Tool Steel

AFNOR Z 100 CDV 5 Tool Steel

AFNOR 90 MV 8 Tool Steel

AFNOR 55 WC 20 Tool Steel

AFNOR 32 DCV 28 Tool Steel

AFNOR 18-05-04-01 Tool Steel

AFNOR 18-04-01 Tool Steel

AFNOR 08-04-02-01 Tool Steel

AFNOR 07-05-04-04-02 Tool Steel

AFNOR 06-05-04-02 Tool Steel

SS 2722 Tool Steel

SS 2260 Tool Steel

SS 2242 Tool Steel

UNI X 82 MoW 09 KU Tool Steel

UNI X 75 W 18 KU Tool Steel

UNI X 28 W O9 KU Tool Steel

UNI X 21O Cr 13 KU Tool Steel

UNI KU Tool Steel

UNI 88 Mn V 8 KU Tool Steel

UNI 58 WCr 9 KU Tool Steel

UNI 130505 KU Tool Steel

U10E Tool Steel

U1 Tool Steel

T3S Tool Steel

T12A Tool Steel

ST40E Tool Steel

ST30E Tool Steel

ST25E Tool Steel

ST20E Tool Steel

ST15E Tool Steel

ST10E Tool Steel

H3 Tool Steel

H2 Tool Steel

H1 Tool Steel

G10E Tool Steel

G8 Tool Steel

G7 Tool Steel

G6 Tool Steel

G5 Tool Steel

G3 Tool Steel

G2 Tool Steel

F1 Tool Steel

F0 Tool Steel

CC Tool Steel

A40 Tool Steel

A1 Tool Steel

SKC31 Tool Steel

SKC24 Tool Steel

SKC11 Tool Steel

SKC3 Tool Steel

SKS95M Tool Steel

SKS81M Tool Steel

SKS51M Tool Steel

SKS7M Tool Steel

SKS5M Tool Steel

SKS2M Tool Steel

SK7M Tool Steel

SK65M Tool Steel

SK6M Tool Steel

SK75M Tool Steel

SK5M Tool Steel

SK85M Tool Steel

SK4M Tool Steel

SK95M Tool Steel

SK3M Tool Steel

SK105M Tool Steel

SK120M Tool Steel

SK2M Tool Steel

SKH 59 Tool Steel

SKH 58 Tool Steel

SKH 57 Tool Steel

SKH 56 Tool Steel

SKH 55 Tool Steel

SKH 54 Tool Steel

SKH 53 Tool Steel

SKH 52 Tool Steel

SKH 51 Tool Steel

SKH 50 Tool Steel

SKH 40 Tool Steel

SKH 10 Tool Steel

SKH 4 Tool Steel

SKH 3 Tool Steel

SKH 2 Tool Steel

45NiCrMo16 Tool Steel

SKT 6 Tool Steel

55NiCrMoV7 Tool Steel

SKT 4 Tool Steel

SKT 3 Tool Steel

X38CrCoWV4-4-4 Tool Steel

SKD 8 Tool Steel

32CrMoV3-3 Tool Steel

SKD 7 Tool Steel

X35CrWMoV5 Tool Steel

SKD 62 Tool Steel

X40CrMoV5-1 Tool Steel

SKD 61 Tool Steel

SKD 6 Tool Steel

X30WCrV9-3 Tool Steel

SKD 5 Tool Steel

SKD 4 Tool Steel

100CrMoV5 Tool Steel

SKD 12 Tool Steel

SKD 11 Tool Steel

X153CrMoV12 Tool Steel

SKD 10 Tool Steel

X210CrW12 Tool Steel

SKD 2 Tool Steel

X210Cr12 Tool Steel

SKD 1 Tool Steel

SKS 95 Tool Steel

SKS 94 Tool Steel

SKS 93 Tool Steel

SKS 31 Tool Steel

SKS 3 Tool Steel

SKS 44 Tool Steel

SKS 43 Tool Steel

SKS 41 Tool Steel

SKS 4 Tool Steel

SKS 8 Tool Steel

SKS 81 Tool Steel

SKS 7 Tool Steel

SKS 51 Tool Steel

SKS 5 Tool Steel

SKS 21 Tool Steel

SKS 2 Tool Steel

SKS 11 Tool Steel

SK60 Tool Steel

SK7 Tool Steel

SK65 Tool Steel

TC70 Tool Steel

SK70 Tool Steel

SK6 Tool Steel

SK75 Tool Steel

TC80 Tool Steel

SK80 Tool Steel

SK5 Tool Steel

SK85 Tool Steel

TC90 Tool Steel

SK90 Tool Steel

SK4 Tool Steel

SK95 Tool Steel

SK3 TC105 Tool Steel

SK105 Tool Steel

SK2 TC120 Tool Steel

SK120 Tool Steel

SK1 Tool Steel

SK140 Tool Steel

Stellite T40 Tool Steel

Stellite X90 Tool Steel

Stellite X40 Tool Steel

Stellite SF20 Tool Steel

Stellite SF12 Tool Steel

Stellite SF6 Tool Steel

Stellite SF1 Tool Steel

Stellite F Tool Steel

Stellite No.2012 Tool Steel

Stellite No.2006 Tool Steel

Stellite No.1040 Tool Steel

Stellite No.1016 Tool Steel

Stellite No.694 Tool Steel

Stellite No.506 Tool Steel

Stellite No.314 Tool Steel

Stellite No.306 Tool Steel

Stellite No.251 Tool Steel

Stellite No.250 Tool Steel

Stellite No.238 Tool Steel

Stellite No.228 Tool Steel

Stellite No.190 PM Tool Steel

Stellite No.190 Tool Steel

Stellite No.159 Tool Steel

Stellite No.158 Tool Steel

Stellite No.157 Tool Steel

Stellite No.156 Tool Steel

Stellite No.107 Tool Steel

Stellite No.100 Tool Steel

Stellite No.98 M2 Tool Steel

Stellite No.31 Tool Steel

Stellite No.30 Tool Steel

Stellite No.27 Tool Steel

Stellite No.25 Tool Steel

Stellite No.23 Tool Steel

Stellite No.21 Tool Steel

Stellite No.20 Tool Steel

Stellite No.19 Tool Steel

Stellite No.12 PM Tool Steel

Stellite No.12 Tool Steel

Stellite No.8 Tool Steel

Stellite No.7 Tool Steel

Stellite No.6 PM Tool Steel

Stellite No.6 KC Tool Steel

Stellite No.6 Tool Steel

Stellite No.4 Tool Steel

Stellite No.3 PM Tool Steel

Stellite No.3 Tool Steel

Stellite No.1 Tool Steel

C-8A Tool Steel

C-8 Tool Steel

C-7A Tool Steel

C-7 Tool Steel

C-6A Tool Steel

C-60 Tool Steel

C-6 Tool Steel

C-5A Tool Steel

C-50 Tool Steel

C-5 Tool Steel

C-4 Tool Steel

C-3 Tool Steel

C-2 Tool Steel

C-1 Tool Steel

CZ-6 Tool Steel

CZ-5 Tool Steel

CZ-4 Tool Steel

CZ-3 Tool Steel

CZ-2 Tool Steel

CZ-1 Tool Steel

CY-13 Tool Steel

CY-12 Tool Steel

CY-11 Tool Steel

CY-10 Tool Steel

CY-9 Tool Steel

CY-8 Tool Steel

CY-7 Tool Steel

CY-6 Tool Steel

CY-5 Tool Steel

CY-4 Tool Steel

CY-3 Tool Steel

CY-2 Tool Steel

CY-1 Tool Steel

CX-8 Tool Steel

CX-7 Tool Steel

CX-6 Tool Steel

CX-5 Tool Steel

CX-4 Tool Steel

CX-3 Tool Steel

CX-2 Tool Steel

CX-1 Tool Steel

CW-5 Tool Steel

CW-4 Tool Steel

CW-3 Tool Steel

CW-2 Tool Steel

CW-1 Tool Steel

CU-5 Tool Steel

CU-4 Tool Steel

CU-3 Tool Steel

CU-2 Tool Steel

CU-1 Tool Steel

CQ-15 Tool Steel

CQ-14 Tool Steel

CQ-13 Tool Steel

CQ-12 Tool Steel

CQ-11 Tool Steel

CQ-10 Tool Steel

CQ-9 Tool Steel

CQ-8 Tool Steel

CQ-7 Tool Steel

CQ-6 Tool Steel

CQ-5 Tool Steel

CQ-4 Tool Steel

CQ-3 Tool Steel

CQ-2 Tool Steel

CQ-1 Tool Steel

ASP 2080 Tool Steel

ASP 2060 Tool Steel

ASP 2055 Tool Steel

ASP 2053 Tool Steel

ASP 2052 Tool Steel

ASP 2040 Tool Steel

ASP 2030 Tool Steel

ASP 2023 Tool Steel

ASP 2017 Tool Steel

ASP 2015 Tool Steel

ASP 2012 Tool Steel

ASP 2011 Tool Steel

ASP 2005 Tool Steel

ASP 2004 Tool Steel

ASP 60 Tool Steel

ASP 30 Tool Steel

ASP 23 Tool Steel

CPM Rex 76HS Tool Steel

CPM Rex 76 Tool Steel

CPM Rex T15HS Tool Steel

CPM Rex T15 Tool Steel

CPM Rex 25 Tool Steel

CPM Rex 20 Tool Steel

CPM Rex 45HS Tool Steel

CPM Rex 45 Tool Steel

CPM Rex M42 Tool Steel

CPM Rex M35HCHS Tool Steel

CPM Rex M4HS Tool Steel

CPM Rex M4 Tool Steel

CPM Rex M3 Tool Steel

CPM Rex M2HCHS Tool Steel

Vanadis 4 Tool Steel

CPM 440V Tool Steel

CPM 10V Tool Steel

CPM 10V Tool Steel

CPM 9V Tool Steel

CPM 3V Tool Steel

CPM 1V Tool Steel

CPM H19V Tool Steel

CPM H19 Tool Steel

CPM H13 Tool Steel

ASTM CS-7 Tool Steel

UNS T91905 Tool Steel

ASTM CS-5 Tool Steel

UNS T91501 Tool Steel

ASTM CO-1 Tool Steel

ASTM CM-2 Tool Steel

UNS T90813 Tool Steel

ASTM CH-13 Tool Steel

UNS T90812 Tool Steel

ASTM CH-12 Tool Steel

UNS T90405 Tool Steel

ASTM CD-5 Tool Steel

UNS T90402 Tool Steel

ASTM CD-2 Tool Steel

UNS T90102 Tool Steel

ASTM CA-2 Tool Steel

UNS T11361 Tool Steel

AISI/SAE M61 Tool Steel

UNS T13135 Tool Steel

AISI/SAE M35 Tool Steel

UNS T13115 Tool Steel

AISI/SAE M15 Tool Steel

UNS T13108 Tool Steel

AISI/SAE M8 Tool Steel

UNS T12008 Tool Steel

AISI/SAE T9 Tool Steel

UNS T12007 Tool Steel

AISI/SAE T7 Tool Steel

UNS T12004 Tool Steel

AISI/SAE T4 Tool Steel

UNS T12003 Tool Steel

AISI/SAE T3 Tool Steel

UNS T11352 Tool Steel

ASTM M52 Tool Steel

UNS T11350 Tool Steel

ASTM M50 Tool Steel

UNS T11362 Tool Steel

ASTM M62 Tool Steel

UNS T13148 Tool Steel

ASTM M48 Tool Steel

UNS T13147 Tool Steel

ASTM M47 Tool Steel

UNS T13146 Tool Steel

ASTM M46 Tool Steel

UNS T13144 Tool Steel

ASTM M44 Tool Steel

UNS T13143 Tool Steel

ASTM M43 Tool Steel

UNS T13142 Tool Steel

ASTM M42 Tool Steel

UNS T13141 Tool Steel

ASTM M41 Tool Steel

UNS T13136 Tool Steel

ASTM M36 Tool Steel

UNS T13134 Tool Steel

ASTM M34 Tool Steel

UNS T13133 Tool Steel

ASTM M33 Tool Steel

UNS T13130 Tool Steel

ASTM M30 Tool Steel

UNS T13110 Tool Steel

ASTM M10(C) Tool Steel

UNS T13110 Tool Steel

ASTM M10 Tool Steel

UNS T13107 Tool Steel

ASTM M7 Tool Steel

UNS T13106 Tool Steel

ASTM M6 Tool Steel

UNS T13104 Tool Steel

ASTM M4 Tool Steel

UNS T13123 Tool Steel

ASTM M3 Class2 Tool Steel

UNS T13113 Tool Steel

ASTM M3 Class1 Tool Steel

UNS T13102 Tool Steel

ASTM M2(C) Tool Steel

UNS T13102 Tool Steel

ASTM M2 Tool Steel

UNS T13101 Tool Steel

ASTM M1 Tool Steel

UNS T12015 Tool Steel

ASTM T15 Tool Steel

UNS T12007 Tool Steel

ASTM T8 Tool Steel

UNS T12006 Tool Steel

ASTM T6 Tool Steel

UNS T12005 Tool Steel

ASTM T5 Tool Steel

UNS T12002 Tool Steel

ASTM T2 Tool Steel

UNS T12001 Tool Steel

ASTM T1 Tool Steel

AISI/SAE 6F6 Tool Steel

AISI/SAE 6F5 Tool Steel

AISI/SAE 6F4 Tool Steel

AISI/SAE 6F3 Tool Steel

AISI/SAE 6F2 Tool Steel

AISI/SAE G6 Tool Steel

UNS T51601 Tool Steel

AISI/SAE P1 Tool Steel

UNS T60603 Tool Steel

AISI/SAE F3 Tool Steel

UNS T61206 Tool Steel

AISI/SAE L7 Tool Steel

UNS T61205 Tool Steel

AISI/SAE L5 Tool Steel

UNS T61204 Tool Steel

AISI/SAE L4 Tool Steel

UNS T61201 Tool Steel

AISI/SAE L1 Tool Steel

UNS T30111 Tool Steel

AISI/SAE A11 Tool Steel

UNS T61206 Tool Steel

AISI/SAE L6 Tool Steel

UNS T61203 Tool Steel

ASTM L3 Tool Steel

UNS T61202 Tool Steel

ASTM L2 Tool Steel

UNS T60602 Tool Steel

ASTM F2 Tool Steel

UNS T60601 Tool Steel

ASTM F1 Tool Steel

UNS T51621 Tool Steel

ASTM P21 Tool Steel

UNS T51620 Tool Steel

ASTM P20 Tool Steel

UNS T51606 Tool Steel

ASTM P6 Tool Steel

UNS T51605 Tool Steel

ASTM P5 Tool Steel

UNS T51604 Tool Steel

AISI/SAE P4 Tool Steel

UNS T51603 Tool Steel

ASTM P3 Tool Steel

UNS T51602 Tool Steel

ASTM P2 Tool Steel

UNS T41907 Tool Steel

ASTM S7 Tool Steel

UNS T41906 Tool Steel

ASTM S6 Tool Steel

UNS T41905 Tool Steel

ASTM S5 Tool Steel

UNS T41904 Tool Steel

ASTM S4 Tool Steel

UNS T41902 Tool Steel

ASTM S2 Tool Steel

UNS T41901 Tool Steel

ASTM S1 Tool Steel

UNS T31507 Tool Steel

ASTM 07 Tool Steel

UNS T31506 Tool Steel

ASTM 06 Tool Steel

UNS T31502 Tool Steel

ASTM 02 Tool Steel

UNS T31501 Tool Steel

ASTM 01 Tool Steel

UNS T30407 Tool Steel

ASTM D7 Tool Steel

UNS T30405 Tool Steel

ASTM D5 Tool Steel

UNS T30404 Tool Steel

ASTM D4 Tool Steel

UNS T30403 Tool Steel

ASTM D3 Tool Steel

UNS T30402 Tool Steel

ASTM D2 Tool Steel

UNS T30110 Tool Steel

ASTM A10 Tool Steel

UNS T30109 Tool Steel

ASTM A9 Tool Steel

UNS T30108 Tool Steel

ASTM A8 Tool Steel

UNS T30107 Tool Steel

ASTM A7 Tool Steel

UNS T30106 Tool Steel

ASTM A6 Tool Steel

UNS T30105 Tool Steel

ASTM A5 Tool Steel

UNS T30104 Tool Steel

ASTM A4 Tool Steel

UNS T30103 Tool Steel

ASTM A3 Tool Steel

UNS T30102 Tool Steel

ASTM A2 Tool Steel

UNS T20843 Tool Steel

ASTM H43 Tool Steel

UNS T20842 Tool Steel

ASTM H42 Tool Steel

UNS T20841 Tool Steel

ASTM H41 Tool Steel

UNS T20826 Tool Steel

ASTM H26 Tool Steel

UNS T20825 Tool Steel

ASTM H25 Tool Steel

UNS T20824 Tool Steel

ASTM H24 Tool Steel

UNS T20823 Tool Steel

ASTM H23 Tool Steel

UNS T20822 Tool Steel

ASTM H22 Tool Steel

UNS T20821 Tool Steel

ASTM H21 Tool Steel

UNS T20819 Tool Steel

ASTM H19 Tool Steel

UNS T20814 Tool Steel

ASTM H14 Tool Steel

UNS T20813 Tool Steel

ASTM H13 Tool Steel

UNS T20812 Tool Steel

ASTM H12 Tool Steel

UNS T20811 Tool Steel

ASTM H11 Tool Steel

UNS T20810 Tool Steel

ASTM H10 Tool Steel

ASTM W7 Tool Steel

ASTM W6 Tool Steel

ASTM W5 Tool Steel

ASTM W4 Tool Steel

ASTM W310 ASTM Tool Steel

ASTM W210 Special Tool Steel

ASTM W209 Special Tool Steel

ASTM W112 Special Tool Steel

ASTM W110 Special Tool Steel

ASTM W109 Special Tool Steel

ASTM W108 Special Tool Steel

ASTM W310 Extra Tool Steel

ASTM W210 Extra Tool Steel

ASTM W209 Extra Tool Steel

ASTM W112 Extra Tool Steel

ASTM W110 Extra Tool Steel

ASTM W109 Extra Tool Steel

ASTM W108 Extra Tool Steel

ASTM W310 Standard Tool Steel

ASTM W210 Standard Tool Steel

ASTM W209 Standard Tool Steel

ASTM W112 Standard Tool Steel

ASTM W110 Standard Tool Steel

ASTM W109 Standard Tool Steel

ASTM W108 Standard Tool Steel

HS6-5-3-8 Tool Steel

HS6-5-4 Tool Steel

HS6-6-2 Tool Steel

HS6-5-3C Tool Steel

HS1-8-1 Tool Steel

HS1-4-2 Tool Steel

HS0-4-1 Tool Steel

38CrCoWV18-17-17 Tool Steel

X35CrWMoV5 Tool Steel

50CrMoV13-15 Tool Steel

X38CrMo16 Tool Steel

X40CrMnNiMo8-6-4 Tool Steel

35CrMo7 Tool Steel

X153CrMoV12 Tool Steel

X100CrMoV5 Tool Steel

95MnWCr5 Tool Steel

70MnMoCr8 Tool Steel

102Cr6 Tool Steel

60WCrV8 Tool Steel

50WCrV8 Tool Steel

105V Tool Steel

C120U Tool Steel

TC120 Tool Steel

C90U Tool Steel

TC90 Tool Steel

S 1-5-2 Tool Steel

1.3392 Tool Steel

HS18-0-1 Tool Steel

S 18-0-1 Tool Steel

1.3355 Tool Steel

HS2-9-2 Tool Steel

S 2-9-2 Tool Steel

1.3348 Tool Steel

1.3346 Tool Steel

S 2-9-1 Tool Steel

HS2-9-1 Tool Steel

HS6-5-3 Tool Steel

S 6-5-3 Tool Steel

1.3344 Tool Steel

HS6-5-2 Tool Steel

S 6-5-2 Tool Steel

1.3343 Tool Steel

HS6-5-2C Tool Steel

SC 6-5-2 Tool Steel

1.3342 Tool Steel

HS6-5-2S Tool Steel

1.3341 Tool Steel

S 6-5-2 S Tool Steel

HS6-5-2CS Tool Steel

SC 6-5-2S Tool Steel

1.3340 Tool Steel

HS3-3-2 Tool Steel

S 3-3-2 Tool Steel

1.3333 Tool Steel

1.3318 Tool Steel

S 12-1-2 Tool Steel

HS12-1-2 Tool Steel

S 12-1-4 Tool Steel

HS12-1-4 Tool Steel

1.3302 Tool Steel

HS18-1-2-10 Tool Steel

S 18-1-2-10 Tool Steel

1.3265 Tool Steel

1.3257 Tool Steel

HS18-1-2-15 Tool Steel

S 18-1-2-15 Tool Steel

HS18-1-2-5 Tool Steel

S 18-1-2-5 Tool Steel

1.3255 Tool Steel

1.3249 Tool Steel

HS2-9-2-8 Tool Steel

S 2-9-2-8 Tool Steel

HS2-9-1-8 Tool Steel

S2-9-10-8 Tool Steel

1.3247 Tool Steel

1.3246 Tool Steel

S7-4-2-5 Tool Steel

HS7-4-2-5 Tool Steel

1.3245 Tool Steel

S6-5-2-5 S Tool Steel

HS6-5-2-5 S Tool Steel

1.3243 Tool Steel

S6-5-2-5 Tool Steel

HS6-5-2-5 Tool Steel

1.3207 Tool Steel

S10-4-3-10 Tool Steel

HS10-4-3-10 Tool Steel

HS12-1-4-5 Tool Steel

S 12-1-4-5 Tool Steel

1.3202 Tool Steel

NiCr19CoMo Tool Steel

1.4973 Tool Steel

1.4668 Tool Steel

NiCr19Fe19Nb5Mo3 Tool Steel

NiCr19NbMo Tool Steel

X45CrMoCoV5-5-3 Tool Steel

1.2889 Tool Steel

1.2888 Tool Steel

X20CoCrWMo10-9 Tool Steel

X15CrMoCoV10-10-5 Tool Steel

1.2886 Tool Steel

X32CrMoCoV3-3-3 Tool Steel

1.2885 Tool Steel

X23CrNi17 Tool Steel

1.2787 Tool Steel

X13NiCrSi36-16 Tool Steel

1.2786 Tool Steel

X16NiCrSi25-20 Tool Steel

1.2782 Tool Steel

X6NiCrTi26-15 Tool Steel

X6NiCrTi26-15 Tool Steel

1.2779 Tool Steel

35NiCrMo16 Tool Steel

1.2766 Tool Steel

28CrMo17 Tool Steel

1.2747 Tool Steel

57NiCrMoV7-7 Tool Steel

1.2744 Tool Steel

28NiCrMoV10 Tool Steel

1.2740 Tool Steel

28NiCrV5 Tool Steel

1.2737 Tool Steel

X50NiCrWV13-13 Tool Steel

1.2731 Tool Steel

26NiCrMoV5 Tool Steel

1.2726 Tool Steel

56NiCrMoV7 Tool Steel

1.2714 Tool Steel

55NiCrMoV7 Tool Steel

X45CoCrWv5-5-5 Tool Steel

1.2678 Tool Steel

X30WCrCoV9-3 Tool Steel

1.2662 Tool Steel

X60WCrMoV9-4 Tool Steel

1.2622 Tool Steel

X37CrMoW5-1 Tool Steel

1.2606 Tool Steel

45CrVMoW5-8 Tool Steel

1.2603 Tool Steel

1.2581 Tool Steel

X30WCrV9-3 Tool Steel

1.2567 Tool Steel

30WCrV17-2 Tool Steel

1.2564 Tool Steel

30WCrV15-1 Tool Steel

X38CrMoV5-3 Tool Steel

1.2367 Tool Steel

X32CrMoV3-3 Tool Steel

32CrMoV12-28 Tool Steel

1.2365 Tool Steel

X48CrMoV8-1-1 Tool Steel

1.2360 Tool Steel

50CrMoV13-14 Tool Steel

1.2357 Tool Steel

X50CrMoV5-1 Tool Steel

1.2345 Tool Steel

X40CrMoV5-1 Tool Steel

1.2344 Tool Steel

X37CrMoV5-1 Tool Steel

X38CrMoV5-1 Tool Steel

1.2343 Tool Steel

X35CrMoV5-1-1 Tool Steel

1.2342 Tool Steel

48CrMoV6-7 Tool Steel

1.2323 Tool Steel

21MnCr10 Tool Steel

1.2313 Tool Steel

65MnCrMo4 Tool Steel

1.2309 Tool Steel

X21Cr13 Tool Steel

1.2082 Tool Steel

X210CrCoW12 Tool Steel

1.2884 Tool Steel

X165CrCoMo12 Tool Steel

1.2880 Tool Steel

90MnCrV8 Tool Steel

1.2842 Tool Steel

145V33 Tool Steel

1.2838 Tool Steel

100V1 Tool Steel

1.2833 Tool Steel

60MnSiCr4 Tool Steel

1.2826 Tool Steel

70Si7 Tool Steel

1.2823 Tool Steel

X45NiCrMo4 Tool Steel

45NiCrMo16 Tool Steel

1.2767 Tool Steel

X19NiCrMo4 Tool Steel

1.2764 Tool Steel

75CrMoNiW6-7 Tool Steel

1.2762 Tool Steel

45NiCrMoV16-16 Tool Steel

1.2746 Tool Steel

15NiCr14 Tool Steel

1.2735 Tool Steel

50NiCr13 Tool Steel

1.2721 Tool Steel

1.2718 Tool Steel

55NiCr10 Tool Steel

55NiCrMoV6 Tool Steel

1.2713 Tool Steel

1.2711 Tool Steel

54NiCrMoV6 Tool Steel

45NiCr6 Tool Steel

1.2710 Tool Steel

X3NiCoMoTi18-9-5 Tool Steel

1.2709 Tool Steel

74NiCr2 Tool Steel

1.2703 Tool Steel

X50CrMoW9-1-1 Tool Steel

1.2631 Tool Steel

73WCrMoV2-2 Tool Steel

1.2604 Tool Steel

1.2601 Tool Steel

X165CrMoV12 Tool Steel

142WV13 Tool Steel

1.2562 Tool Steel

80WCrV8 Tool Steel

1.2552 Tool Steel

1.2550 Tool Steel

60WCrV8 Tool Steel

60WCrV7 Tool Steel

45WCrV7 Tool Steel

1.2542 Tool Steel

110WCrV5 Tool Steel

1.2519 Tool Steel

120WV4 Tool Steel

1.2516 Tool Steel

100MnCrW4 Tool Steel

1.2510 Tool Steel

X130W5 Tool Steel

1.2453 Tool Steel

115W8 Tool Steel

1.2442 Tool Steel

X210CrW12 Tool Steel

1.2436 Tool Steel

105WCr6 Tool Steel

1.2419 Tool Steel

120W4 Tool Steel

1.2414 Tool Steel

73MoV5-2 Tool Steel

1.2381 Tool Steel

1.2379 Tool Steel

X153CrMo12-2 Tool Steel

X155CrMoV12-1 Tool Steel

X220CrMoV12-2 Tool Steel

1.2378 Tool Steel

X96CrMoV12 Tool Steel

1.2376 Tool Steel

81CrMoV42-16 Tool Steel

1.2369 Tool Steel

1.2363 Tool Steel

X100CrMoV5-1 Tool Steel

X100CrMo5 Tool Steel

X63CrMoV5-1 Tool Steel

1.2362 Tool Steel

X9CrMoV8 Tool Steel

1.2361 Tool Steel

27CrMoV6-12 Tool Steel

1.2353 Tool Steel

X6CrMo 15-5 Tool Steel

X6CrMo4 Tool Steel

1.2341 Tool Steel

45CrMoV7 Tool Steel

1.2328 Tool Steel

86CrMoV7 Tool Steel

1.2327 Tool Steel

X64CrMo14 Tool Steel

1.2319 Tool Steel

1.2316 Tool Steel

X36CrMo17 Tool Steel

X36CrMo16 Tool Steel

40CrMnMoS8-6 Tool Steel

1.2312 Tool Steel

40CrMnMo7 Tool Steel

1.2311 Tool Steel

29CrMoV9 Tool Steel

1.2307 Tool Steel

102CrMo6 Tool Steel

1.2305 Tool Steel

100CrMo5 Tool Steel

1.2303 Tool Steel

45CrSiV6 Tool Steel

1.2249 Tool Steel

38CrSiV6 Tool Steel

1.2248 Tool Steel

61CrSiV5 Tool Steel

1.2243 Tool Steel

59CrV4 Tool Steel

1.2242 Tool Steel

1.2241 Tool Steel

51CrV4 Tool Steel

51CrMnV4 Tool Steel

1.2235 Tool Steel

80CrV2 Tool Steel

115CrV3 Tool Steel

1.2210 Tool Steel

31CrV2 Tool Steel

31CrV3 Tool Steel

1.2208 Tool Steel

140CrV1 Tool Steel

1.2206 Tool Steel

X165CrV12 Tool Steel

1.2201 Tool Steel

21MnCr5 Tool Steel

1.2162 Tool Steel

200CrMn8 Tool Steel

1.2129 Tool Steel

105MnCr4 Tool Steel

1.2127 Tool Steel

125CrSi5 Tool Steel

1.2109 Tool Steel

90CrSi5 Tool Steel

1.2108 Tool Steel

58SiCr8 Tool Steel

1.2103 Tool Steel

62SiMnCr4 Tool Steel

1.2101 Tool Steel

X33CrS16 Tool Steel

1.2085 Tool Steel

X40Cr14 Tool Steel

X42Cr13 Tool Steel

1.2083 Tool Steel

1.2080 Tool Steel

X210Cr12 Tool Steel

102Cr6 Tool Steel

100Cr6 Tool Steel

1.2067 Tool Steel

145Cr6 Tool Steel

1.2063 Tool Steel

105Cr4 Tool Steel

1.2057 Tool Steel

90Cr3 Tool Steel

1.2056 Tool Steel

140Cr2 Tool Steel

140Cr3 Tool Steel

1.2008 Tool Steel

85Cr1 Tool Steel

1.2004 Tool Steel

75Cr1 Tool Steel

1.2003 Tool Steel

1.2002 Tool Steel

125Cr1 Tool Steel

125Cr2 Tool Steel

C85U Tool Steel

1.1830 Tool Steel

C85W Tool Steel

1.1820 Tool Steel

C55W Tool Steel

C75W Tool Steel

1.1750 Tool Steel

C67W Tool Steel

1.1744 Tool Steel

C60U Tool Steel

C60W Tool Steel

1.1740 Tool Steel

C45U Tool Steel

C45W Tool Steel

1.1730 Tool Steel

C105W2 Tool Steel

1.1645 Tool Steel

C80W2 Tool Steel

1.1625 Tool Steel

C70W2 Tool Steel

1.1620 Tool Steel

C135U Tool Steel

1.1573 Tool Steel

C135W Tool Steel

1.1563 Tool Steel

C125W Tool Steel

C125U Tool Steel

C110U Tool Steel

C110W Tool Steel

1.1554 Tool Steel

C105U Tool Steel

C105W1 Tool Steel

1.1545 Tool Steel

1.1525 Tool Steel

C80W1 Tool Steel

C80U Tool Steel

C70U Tool Steel

1.1520 Tool Steel

C70W1 Tool Steel

Electrode 100S-1 Tool Steel

AISI A4 Tool Steel

AISI A3 Tool Steel

AISI A2 Tool Steel

AISI A10 Tool Steel

1.2767 Tool Steel

Water Hardening Tool Steel Supplier in chennai , Cold Work Tool Steel Supplier in chennai , Shock Resisting Tool Steel Supplier in chennai , High Speed Tool Steel Supplier in chennai , Hot Work Tool Steel Supplier in chennai , Special Purpose / Plastic Mold tool Steel Supplier in chennai , AISI H Hardened Steel Supplier in chennai , AISI H10 Hardened Steel Supplier in chennai , AISI H11 Hardened Steel Supplier in chennai , AISI h12 Hardened Steel Supplier in chennai , AISI H13 Hardened Steel Supplier in chennai , AISI H14 Hardened Steel Supplier in chennai , AISI H16 Hardened Steel Supplier in chennai , AISI H19 Hardened Steel Supplier in chennai , AISI H23 Hardened Steel Supplier in chennai , AISI H20 Hardened Steel Supplier in chennai , AISI H21 Hardened Steel Supplier in chennai , AISI H22 Hardened Steel Supplier in chennai , AISI H24 Hardened Steel Supplier in chennai , AISI H25 Hardened Steel Supplier in chennai , AISI H26 Hardened Steel Supplier in chennai , AISI H15 Hardened Steel Supplier in chennai , AISI H41 Hardened Steel Supplier in chennai , AISI H42 Hardened Steel Supplier in chennai , AISI H43 Hardened Steel Supplier in chennai , Hot Work Tool Steel Supplier in chennai , Cold Work Tool Steel Supplier in chennai , Plastic Mould Steel Supplier in chennai , Quenched and Tempered Alloy Steels Supplier in chennai , Carbon Steel Supplier in chennai , Bearing Steel and Gear Steel Supplier in chennai , High Speed Steel Supplier in chennai , AISI M3 CLASS2 High Speed Tool Steels Supplier in chennai , UNS T11323 M3 CLASS2 tool steel-ASTM A600-1999 Supplier in chennai , UNS T11323 | AISI M3 CLASS2 steel Supplier in chennai , M3 CLASS2/UNS T11323/A600 Supplier in chennai , S 6-5-3 / 1.3344 Supplier in chennai , CW6Mo5Cr4V3 SKH53 Supplier in chennai , HS6-5-3 Supplier in chennai , BM3 CLASS2 Supplier in chennai , HS 6-5-3 Supplier in chennai , Alloy Steel UNS T11323 | M3 CLASS2 High Speed Tool Steel Supplier in chennai , HSS Steel Material UNS T11323 | M3 CLASS2 Supplier in chennai , 2725 High Speed Steel Supplier in chennai ... AISI M10 High Speed Tool Steel Supplier in chennai , AISI M2 High Speed Tool Steel Supplier in chennai , AISI M3 High Speed Tool Steel Supplier in chennai , AISI M30 High Speed Tool Steel Supplier in chennai , AISI M33 High Speed Tool Steel Supplier in chennai , AISI M34 High Speed Tool Steel Supplier in chennai , AISI M36 High Speed Tool Steel Supplier in chennai , AISI M4 High Speed Tool Steel Supplier in chennai , AISI M46 High Speed Tool Steel Supplier in chennai , AISI M47 High Speed Tool Steel Supplier in chennai , AISI M6 High Speed Tool Steel Supplier in chennai , AISI M7 High Speed Tool Steel Supplier in chennai ...