• Testing of Flexible Cellular Materials - Latex Foam ASTM D1055-04

• Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

• Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00

• Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

• Refractive index

• Specific gravity

• pH

• Foam quality

• Viscosity

• Film formation

• Sedimentation

• Appearance, visual

• pH, ASTM D1293, EN 1568

• Density, ASTM D4052

• Viscosity ISO 3104, sediment EN 1568-C

• Drainage time, EN 1568-G

• Expansion ratio, EN 1568-G

• Fire test performance, "burn back test", EN 1568-I

• Refractive index, ISO 5561

• Refractive index, ASTM D1218, ISO 5661

• Resistance to polar solvents

• Solution concentration

• Pour Point ASTM D5950

• Cloud point ASTM D5773

• Freeze-point

• Surface tension, ISO 304, ASTM D-971

• Temperature conditioning, EN 1568-H

• Protein foam concentrates (P)

• Fluoroprotein foam concentrates (FP)

• Synthetic foam concentrates (S)

• Alcohol resistant foam concentrates (AR)

• Aqueous film-forming foam concentrates (AFFF)

• Film-forming fluoroprotein foam concentrates (FFFP)

• ABS Thermoplastic Testing lab

• Acrylic Thermoplastic Polymer Testing lab

• Polybenzimidazole Thermoplastic Polymer Testing lab

• Polyethylene Thermoplastic Polymers Testing lab

• Homopolymer Thermoplastic Testing lab

• Copolymer Thermoplastic Testing lab

• Polyester Thermoplastic Testing lab

• Polyurethane Thermoplastic Polymer Testing lab

• Styrene Acrylonitrile Polymer Testing lab

Physical property tests measure the molecular structure of the material which can often effect the physical properties. The most important properties for measurement include:

The ratio of the density of a liquid or solid mass to the density of water at a specific temperature.

The resistance of a plastic material to indentation. It is measured on a durometer machine which led to the industry to call hardness “duro.” Normal specification is plus or minus 3 and three scales are used: Shore A for flexible, Shore C for semi rigid and Shore D for rigid. Usually a delayed reading of 10 or 15 seconds is used.

The maximum nominal stress sustained by a test specimen being pulled from both ends, at a specific temperature and a specific rate of stretching. Specification is a minimum amount in Pascals, (10-6 N/mm2).

The amount of increased length of a material until breakage. Specification is a minimum percentage.

The three point bending flexural test provides values for the modulus of elasticity in bending, flexural stress, flexural strain and the flexural stress-strain response of the material. The main advantage of a three point flexural test is the ease of the specimen preparation and testing.

The Charpy impact test, also known as the Charpy V-notch test, is a standardized high strain-rate test which determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material’s notch toughness and acts as a tool to study temperature-dependent ductile-brittle transition.

• Ion exchange capacities by ASTM and other methods

• Carbonate/bicarbonate content (including organically-bound and ionic C-14)

• Ionic composition

• Resin flow testing facilities (kinetics and operating capacity under once-through and recirculation modes for engineering scale-up projections)

• Natural and process-induced fouling

• Slurriability and separability of mixed bed resins

• Wet particle size analysis

• Crush strength (friability – Chatillon) and attrition

• Thermal and oxidation resistance

• Attrition

• Specialized sampling and analysis capabilities for radioactive process resins and waste resins

• Quality assurance and quality control testing of new resins

• ABS Plastic Testing Lab

• Polypropylene Testing

• Polyethylene Testing

• PVC Testing lab

• Nylon 6-6 Testing lab

• PTFE Testing Services

• PET Testing Services

• ABS/PC alloys Plastic Testing Lab

• Acetal Plastic Testing Lab

• Acrylic Testing Lab

• Acrylic-styrene copolymer

• Acrylonitrile

• Cellulose Acetate

• Cellulose Acetate Butanal

• Cellulose Acetate Propionate

• Chlorinated polyethylene

• Epoxy resins

• Ethylene vinyl alcohol

• Fluoroplastic – PTFE

• Fluoroplastic – FEP

• Fluoroplastic – PVDF

• Ionomer

• Polyacrylether ketone

• Polyetheether ketone

• Liquid Crystal Polymer

• Melamine formaldehyde

• Phenolics

• Nylon 6

• Nylon 6/6

• Nylon 6/10

• Nylon 6/12

• Nylon 4/6

• Nylon 11

• Nylon 12

• Aromatic polyamide

• Polyamide-Polyimide

• Polyethylene and copolymers

• Polycarbonate

• Polybutylene Terephthalate

• Polycyclohexene dimethanol terephthalate

• PET: Polyethylene terephthalate

• PET/ PC blends

• Polyetherimide

• Polyethersulfone

• Polyimide

• Polymethylpentene

• Polyphenylene oxide

• Polyphenylene sulfide

• Polyphthalamide

• Polypropylene and copolymers

• Polystyrene and copolymers

• Polyurethanes

• Polyvinylidene chloride

• Silicones

• Polysulfones

• Polyethersulfones

• Polyureas

• PVC: Polyvinyl chloride

• Polyvinylchloride (chlorinated)

• Polyarylate plastic testing lab

• Polyurethane (PUR) plastic testing lab

• Acrylonitrile Ethylene Styrene (AES) plastic testing lab

• Polyaryletherketone (PAEK) plastic testing lab

• Polyethylene (PE) plastic testing lab

• Thermoplastic Elastomer (TPE) plastic testing lab

• Polyurethane Thermoset Elastomer (TSU) plastic testing lab

• Acrylonitrile Styrene (AS) plastic testing alab

• Acrylonitrile Styrene Acrylate (ASA) plastic testing lab

• Polybutadiene Rubber (PBR) plastic testing lab

• SiliconeAlphamethylstyrene (AMS) plastic testing lab

• Polycaprolactone (PCL) plastic testing lab

• Styrene Acrylonitrile (SAN) plastic testing lab

• Biodegradable Polymers plastic testing lab

• Styrene Acrylonitrile Silicone (SAS) plastic testing lab

• Cellulose Acetate (CA) plastic testing lab

• PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab

• Diallyl Phthalate (DAP) plastic testing lab

• Polyether Imide (PEI) plastic testing lab

• Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab

• Dicyclopentadiene (DCPD) plastic testing lab

• Epoxy plastic testing and analysis lab

• Polyethylene Naphthalate (PEN) plastic testing lab

• Thermoplastic Polyurethane (TPU) plastic testing lab

• Fluoropolymer plastic testing lab

• Polyimide (PI) plastic testing lab

• FuranPolylactic Acid (PLA) plastic testing lab

• Thermoset (TS) plastic testing lab

• Ionomer plastic testing lab

• Polymethylpentene (PMP) plastic testing lab

• Thermoset Elastomer (TSE) plastic testing lab

• Polyphenylene Ether (PPE) plastic testing lab

• Vinyl Alcohol (VOH) plastic testing lab

• Methyl Cellulose (MC) plastic testing lab

• Polyphenylene Sulfide (PPS) plastic testing lab

• Methyl Methacrylate (MM) plastic testing lab

• Polyarylate polymer testing lab

• Polyurethane (PUR) polymer testing lab

• Acrylonitrile Ethylene Styrene (AES) polymer testing lab

• Polyaryletherketone (PAEK) polymer testing lab

• Polyethylene (PE) polymer testing lab

• Thermopolymer Elastomer (TPE) polymer testing lab

• Polyurethane Thermoset Elastomer (TSU) polymer testing lab

• Acrylonitrile Styrene (AS) polymer testing lab

• Acrylonitrile Styrene Acrylate (ASA) polymer testing lab

• Polybutadiene Rubber (PBR) polymer testing lab

• SiliconeAlphamethylstyrene (AMS) polymer testing lab

• Polycaprolactone (PCL) polymer testing lab

• Styrene Acrylonitrile (SAN) polymer testing lab

• Biodegradable Polymers polymer testing lab

• Styrene Acrylonitrile Silicone (SAS) polymer testing lab

• Cellulose Acetate (CA) polymer testing lab

• PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab

• Diallyl Phthalate (DAP) polymer testing lab

• Polyether Imide (PEI) polymer testing lab

• Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab

• Dicyclopentadiene (DCPD) polymer testing lab

• Epoxy polymer testing lab

• Polyethylene Naphthalate (PEN) polymer testing lab

• Thermopolymer Polyurethane (TPU) polymer testing lab

• Fluoropolymer polymer testing lab

• Polyimide (PI) polymer testing lab

• FuranPolylactic Acid (PLA) polymer testing lab

• Thermoset (TS) polymer testing lab

• Ionomer polymer testing lab

• Polymethylpentene (PMP) polymer testing lab

• Thermoset Elastomer (TSE) polymer testing lab

• Polyphenylene Ether (PPE) polymer testing lab

• Vinyl Alcohol (VOH) polymer testing lab

• Methyl Cellulose (MC) polymer testing lab

• Polyphenylene Sulfide (PPS) polymer testing lab

• Methyl Methacrylate (MM) polymer testing lab

• Polymer product testing lab

• Polymer failure analysis lab

• Polymer reverse engineering lab

• Polymer analytical testing lab

• Mechanical testing of polymer lab

• polymers product testing lab

• Tensile testing of polymer lab

• Compression testing lab

• Bend testing O polymer lab

• Chemical analysis of polymer lab

• Physical testing of polymer lab

• FTIR analysis of polymer lab

• Polymer testing laboratory services

• Thermal analysis of polymer lab

• DSC Analysis of polymer lab

• Failure analysis of polymer lab

• Flexural testing lab

• Shear testing lab

• Intrinsic viscosity of polymers lab

• Inherent viscosity of polymers lab

• Relative viscosity of polymers lab

• Failure Analysis of lab

• Polymer testing lab

• Rubber gaskets testing lab

• Rubber pads testing lab

• Rubber O- Rings testing lab

• Rubber granules testing lab

• Rubber sponges testing lab

• Rubber corks testing lab

• Rubber tires testing lab

• Rubber seals testing lab

• Rubber mats testing lab

• Rubber automotive parts testing lab

• Rubber aerospace parts testing lab

• Other Rubber products testing lab

• Rubber shoes testing lab

• Rubber soles testing lab

• Rubber gloves testing lab

• Rubber bellows testing lab

• Allied rubber products testing lab

• Testing and analysis of crumb rubber

• Rubber degradation studies

• Rubber compound analysis

• Rubber product reverse engineering

• Rubber material identification

• Natural rubber (NR)

• Synthetic Polyisporene (IR)

• Butyl rubber

• Chlorobutyl rubber (CR)

• Bromo butyl rubber

• Polybutadiene

• Styrene-butadiene rubber (SBR)

• Nitrile butadiene rubber (NBR)

• Hydrogenated nitrile-butadiene rubber

• Carboxylated nitrile butadiene rubber

• Chloroprene rubber

• Ethylene propylene rubber (EPM)

• Ethylene propylene diene rubber (EPDM)

• Epichlorohydrin rubber

• Polyacrylic rubber

• Silicone rubber

• Fluorosilicones

• Fluorphosphazene

• Fluorinated elastomer - Viton

• Fluorinated elastomer - Aflas

• Fluorinated elastomer - Kalrez

• Polysulfides

• Polyether block amides

• Chlorosulfonated polyethylene (Hypalon)

• Ethylene vinyl acetate (EVA)

• Polyolefin

• Copolyester-ether

• Polyester

• Styrene-Butadiene block copolymers

• Sytrene-Ethylene block copolymers

• Polyester polyurethane

• Polyether polyurethane

Hardness (Durometer) (ASTM D 2240)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Tear Resistance (ASTM D 624)

Compression Set Method B (ASTM D 395)

Compression Set at Low Temperature (ASTM D 1229)

Compression Deflection (ASTM D 575)

Accelerated ageing tests –Heat ageing (ASTM D 573)

Fuel / Chemical Resistance of Rubber ASTM D 471-98e2

Adhesion to a Flexible Substrate (ASTM D 413)

Adhesion to a Rigid Substrate (ASTM D 429)

Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04

Crack growth – De mattia (ASTM D813 - ASTM D430)

Rebound Resilience – Vertical ( ASTM D2632)

Ozone Cracking – Static (ASTM 1149)

Cracking Outdoors (ASTM d1171)

Cracking – Dynamic (ASTM D3395)

Low Temperature testing

Surface and volume Resistivity of insulating materials (ASTM D257)

Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)

Identification by Infrared - Rubber (ASTM D 3677)

Identification by Infrared – Rubber Chemicals(ASTM D2702-05)

Melting Point / Range of Rubber chemicals

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00

Chemical Analysis of Rubber compound ( ASTM D297)

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Tg by DSC technique (ASTM D7426-08(2013)

Determination of IRHD of rubber (ASTM D3418-15)

UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

Tests on plastics materials and products

Hardness (Durometer) (ASTM D 2240)

Rockwell Hardness (ASTM D 785)

Tensile Properties (ASTM 638)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Izod Impact Strength (ASTM D256)

Charpy Impact Strength( ASTM D6110)

Density and Specific Gravity (ASTM D 792)

Melt Flow Rate or Melt Flow Index (ASTM D 1238)

Vicat Softening temperature of plastics (ASTM D1525)

Deflection Temperature of Plastic ( ASTM D0648)

Rate of Burning and/or Extent and Time of Burning (ASTM D0635)

Resistance of Plastics to Chemical Reagents ( ASTM D0543)

Water Absorption of Plastics (ASTM D0570)

Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)

Carbon Black content In Olefin Plastics (ASTM D1603)

Identification of Polymer by Infrared Spectrophotometry

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

UV weatherability test for Plastics

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Tests on Foam and Sponges

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Rubber and flexible Thermoplastic materials

Hardness (Durometer) (ASTM D 2240)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Tear Resistance (ASTM D 624)

Compression Set Method B (ASTM D 395)

Compression Set at Low Temperature (ASTM D 1229)

Compression Deflection (ASTM D 575)

Accelerated ageing tests –Heat ageing (ASTM D 573)

Fuel / Chemical Resistance of Rubber ASTM D 471-98e2

Adhesion to a Flexible Substrate (ASTM D 413)

Adhesion to a Rigid Substrate (ASTM D 429)

Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04

Crack growth – De mattia (ASTM D813 - ASTM D430)

Rebound Resilience – Vertical ( ASTM D2632)

Ozone Cracking – Static (ASTM1149)

Cracking Outdoors (ASTMd1171)

Cracking – Dynamic (ASTM D3395)

Low Temperature testing

Surface and volume Resistivity of insulating materials (ASTM D257)

Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)

Identification by Infrared - Rubber (ASTM D 3677)

Identification by Infrared – Rubber Chemicals(ASTM D2702-05)

Melting Point / Range of Rubber chemicals

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00

Chemical Analysis of Rubber compound ( ASTM D297)

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Tg by DSC technique (ASTM D7426-08(2013)

Determination of IRHD of rubber (ASTM D3418-15)

UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

Tests on plastics materials and products

Hardness (Durometer) (ASTM D 2240)

Rockwell Hardness (ASTM D 785)

Tensile Properties (ASTM 638)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Charpy Impact Strength( ASTM D6110)

Density and Specific Gravity (ASTM D 792)

Melt Flow Rate or Melt Flow Index (ASTM D 1238)

Vicat Softening temperature of plastics (ASTM D1525)

Deflection Temperature of Plastic ( ASTM D0648)

Rate of Burning and/or Extent and Time of Burning (ASTM D0635)

Resistance of Plastics to Chemical Reagents ( ASTM D0543)

Water Absorption of Plastics (ASTM D0570)

Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)

Carbon Black content In Olefin Plastics (ASTM D1603)

Identification of Polymer by Infrared Spectrophotometry

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

UV weatherability test for Plastics

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Tests on Foam and Sponges

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Rubber and flexible Thermoplastic materials

Hardness (Durometer) (ASTM D 2240)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Tear Resistance (ASTM D 624)

Compression Set Method B (ASTM D 395)

Compression Set at Low Temperature (ASTM D 1229)

Compression Deflection (ASTM D 575)

Accelerated ageing tests –Heat ageing (ASTM D 573)

Fuel / Chemical Resistance of Rubber ASTM D 471-98e2

Adhesion to a Flexible Substrate (ASTM D 413)

Adhesion to a Rigid Substrate (ASTM D 429)

Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04

Crack growth – De mattia (ASTM D813 - ASTM D430)

Rebound Resilience – Vertical ( ASTM D2632)

Ozone Cracking – Static (ASTM1149)

Cracking Outdoors (ASTMd1171)

Cracking – Dynamic (ASTM D3395)

Low Temperature testing

Surface and volume Resistivity of insulating materials (ASTM D257)

Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)

Identification by Infrared - Rubber (ASTM D 3677)

Identification by Infrared – Rubber Chemicals(ASTM D2702-05)

Melting Point / Range of Rubber chemicals

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00

Chemical Analysis of Rubber compound ( ASTM D297)

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Tg by DSC technique (ASTM D7426-08(2013)

Determination of IRHD of rubber (ASTM D3418-15)

UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

Tests on plastics materials and products

Hardness (Durometer) (ASTM D 2240)

Rockwell Hardness (ASTM D 785)

Tensile Properties (ASTM 638)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Charpy Impact Strength( ASTM D6110)

Density and Specific Gravity (ASTM D 792)

Melt Flow Rate or Melt Flow Index (ASTM D 1238)

Vicat Softening temperature of plastics (ASTM D1525)

Deflection Temperature of Plastic ( ASTM D0648)

Rate of Burning and/or Extent and Time of Burning (ASTM D0635)

Resistance of Plastics to Chemical Reagents ( ASTM D0543)

Water Absorption of Plastics (ASTM D0570)

Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)

Carbon Black content In Olefin Plastics (ASTM D1603)

Identification of Polymer by Infrared Spectrophotometry

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

UV weatherability test for Plastics

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Tests on Foam and Sponges

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Rubber and flexible Thermoplastic materials

Hardness (Durometer) (ASTM D 2240)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Tear Resistance (ASTM D 624)

Compression Set Method B (ASTM D 395)

Compression Set at Low Temperature (ASTM D 1229)

Compression Deflection (ASTM D 575)

Accelerated ageing tests –Heat ageing (ASTM D 573)

Fuel / Chemical Resistance of Rubber ASTM D 471-98e2

Adhesion to a Flexible Substrate (ASTM D 413)

Adhesion to a Rigid Substrate (ASTM D 429)

Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04

Crack growth – De mattia (ASTM D813 - ASTM D430)

Rebound Resilience – Vertical ( ASTM D2632)

Ozone Cracking – Static (ASTM1149)

Cracking Outdoors (ASTMd1171)

Cracking – Dynamic (ASTM D3395)

Low Temperature testing

Surface and volume Resistivity of insulating materials (ASTM D257)

Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)

Identification by Infrared - Rubber (ASTM D 3677)

Identification by Infrared – Rubber Chemicals(ASTM D2702-05)

Melting Point / Range of Rubber chemicals

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00

Chemical Analysis of Rubber compound ( ASTM D297)

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Tg by DSC technique (ASTM D7426-08(2013)

Determination of IRHD of rubber (ASTM D3418-15)

UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

Tests on plastics materials and products

Hardness (Durometer) (ASTM D 2240)

Rockwell Hardness (ASTM D 785)

Tensile Properties (ASTM 638)

Tensile, Elongation and Modulus Properties (ASTM D 412)

Charpy Impact Strength( ASTM D6110)

Density and Specific Gravity (ASTM D 792)

Melt Flow Rate or Melt Flow Index (ASTM D 1238)

Vicat Softening temperature of plastics (ASTM D1525)

Deflection Temperature of Plastic ( ASTM D0648)

Rate of Burning and/or Extent and Time of Burning (ASTM D0635)

Resistance of Plastics to Chemical Reagents ( ASTM D0543)

Water Absorption of Plastics (ASTM D0570)

Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)

Carbon Black content In Olefin Plastics (ASTM D1603)

Identification of Polymer by Infrared Spectrophotometry

Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)

UV weatherability test for Plastics

Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)

Tests on Foam and Sponges

Testing of Flexible Cellular Materials - Latex Foam D1055-04

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00

Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97

pvc material testing Laboratory in chennai , pvc pipe testing Laboratory in chennai , rubber testing Laboratory in chennai , polymer testing Laboratory in chennai , latex testing Laboratory in chennai , plastic testing Laboratory in chennai , abs plastic testing Laboratory in chennai , packaging material testing Laboratory in chennai , food packaging material testing Laboratory in chennai , civil material testing Laboratory in chennai , construction material testing Laboratory in chennai , spring testing Laboratory in chennai , wood testing Laboratory in chennai , paint testing Laboratory in chennai , bricks testing Laboratory in chennai , resin testing Laboratory in chennai , thermoplastic testing Laboratory in chennai , foam testing Laboratory in chennai , sponge testing Laboratory in chennai , heavy metal testing in chennai , coal testing Laboratory in chennai , coal coke testing in chennai , thermal coal testing in chennai , metallurgical coke testing in chennai , petrolium coke testing in chennai , fertilizer testing in chennai , cement testing Laboratory in chennai , fly ash testing in chennai , aggregates testing Laboratory in chennai , rock testing Laboratory in chennai , textile testing Laboratory in chennai , fabric and garment testing Laboratory in chennai , fabric testing Laboratory in chennai , asphalt testing Laboratory in chennai , uts utm testing in chennai , triaxial rock testing in chennai ... Polyarylate plastic testing Laboratory in chennai , Polyurethane (PUR) plastic testing Laboratory in chennai , Acrylonitrile Ethylene Styrene (AES) plastic testing Laboratory in chennai , Polyaryletherketone (PAEK) plastic testing Laboratory in chennai , Polyethylene (PE) plastic testing Laboratory in chennai , Thermoplastic Elastomer (TPE) plastic testing Laboratory in chennai , Polyurethane Thermoset Elastomer (TSU) plastic testing Laboratory in chennai , Acrylonitrile Styrene (AS) plastic testing aLaboratory in chennai , Acrylonitrile Styrene Acrylate (ASA) plastic testing Laboratory in chennai , Polybutadiene Rubber (PBR) plastic testing Laboratory in chennai , SiliconeAlphamethylstyrene (AMS) plastic testing Laboratory in chennai , Polycaprolactone (PCL) plastic testing Laboratory in chennai , Styrene Acrylonitrile (SAN) plastic testing Laboratory in chennai , Biodegradable Polymers plastic testing Laboratory in chennai , Styrene Acrylonitrile Silicone (SAS) plastic testing Laboratory in chennai , Cellulose Acetate (CA) plastic testing Laboratory in chennai , PolyesterStyrene Maleic Anhydride (SMA) plastic testing Laboratory in chennai , Diallyl Phthalate (DAP) plastic testing Laboratory in chennai , Polyether Imide (PEI) plastic testing Laboratory in chennai , Styrenic Vinyl Acrylonitrile (SVA) plastic testing Laboratory in chennai , Dicyclopentadiene (DCPD) plastic testing Laboratory in chennai , Epoxy plastic testing and analysis Laboratory in chennai , Polyethylene Naphthalate (PEN) plastic testing Laboratory in chennai , Thermoplastic Polyurethane (TPU) plastic testing Laboratory in chennai , Fluoropolymer plastic testing Laboratory in chennai , Polyimide (PI) plastic testing Laboratory in chennai , FuranPolylactic Acid (PLA) plastic testing Laboratory in chennai , Thermoset (TS) plastic testing Laboratory in chennai , Ionomer plastic testing Laboratory in chennai , Polymethylpentene (PMP) plastic testing Laboratory in chennai , Thermoset Elastomer (TSE) plastic testing Laboratory in chennai , Polyphenylene Ether (PPE) plastic testing Laboratory in chennai , Vinyl Alcohol (VOH) plastic testing Laboratory in chennai , Methyl Cellulose (MC) plastic testing Laboratory in chennai , Polyphenylene Sulfide (PPS) plastic testing Laboratory in chennai , Methyl Methacrylate (MM) plastic testing Laboratory in chennai ... Polyarylate polymer testing Laboratory in chennai , Polyurethane (PUR) polymer testing Laboratory in chennai , Acrylonitrile Ethylene Styrene (AES) polymer testing Laboratory in chennai , Polyaryletherketone (PAEK) polymer testing Laboratory in chennai , Polyethylene (PE) polymer testing Laboratory in chennai , Thermopolymer Elastomer (TPE) polymer testing Laboratory in chennai , Polyurethane Thermoset Elastomer (TSU) polymer testing Laboratory in chennai , Acrylonitrile Styrene (AS) polymer testing Laboratory in chennai , Acrylonitrile Styrene Acrylate (ASA) polymer testing Laboratory in chennai , Polybutadiene Rubber (PBR) polymer testing Laboratory in chennai , SiliconeAlphamethylstyrene (AMS) polymer testing Laboratory in chennai , Polycaprolactone (PCL) polymer testing Laboratory in chennai , Styrene Acrylonitrile (SAN) polymer testing Laboratory in chennai , Biodegradable Polymers polymer testing Laboratory in chennai , Styrene Acrylonitrile Silicone (SAS) polymer testing Laboratory in chennai , Cellulose Acetate (CA) polymer testing Laboratory in chennai , PolyesterStyrene Maleic Anhydride (SMA) polymer testing Laboratory in chennai , Diallyl Phthalate (DAP) polymer testing Laboratory in chennai , Polyether Imide (PEI) polymer testing Laboratory in chennai , Styrenic Vinyl Acrylonitrile (SVA) polymer testing Laboratory in chennai , Dicyclopentadiene (DCPD) polymer testing Laboratory in chennai , Epoxy polymer testing Laboratory in chennai , Polyethylene Naphthalate (PEN) polymer testing Laboratory in chennai , Thermopolymer Polyurethane (TPU) polymer testing Laboratory in chennai , Fluoropolymer polymer testing Laboratory in chennai , Polyimide (PI) polymer testing Laboratory in chennai , FuranPolylactic Acid (PLA) polymer testing Laboratory in chennai , Thermoset (TS) polymer testing Laboratory in chennai , Ionomer polymer testing Laboratory in chennai , Polymethylpentene (PMP) polymer testing Laboratory in chennai , Thermoset Elastomer (TSE) polymer testing Laboratory in chennai , Polyphenylene Ether (PPE) polymer testing Laboratory in chennai , Vinyl Alcohol (VOH) polymer testing Laboratory in chennai , Methyl Cellulose (MC) polymer testing Laboratory in chennai , Polyphenylene Sulfide (PPS) polymer testing Laboratory in chennai , Methyl Methacrylate (MM) polymer testing Laboratory in chennai , Polymer product testing Laboratory in chennai , Polymer failure analysis Laboratory in chennai , Polymer reverse engineering Laboratory in chennai , Polymer analytical testing Laboratory in chennai , Mechanical testing of polymer Laboratory in chennai , polymers product testing Laboratory in chennai , Tensile testing of polymer Laboratory in chennai , Compression testing Laboratory in chennai , Bend testing O polymer Laboratory in chennai , Chemical analysis of polymer Laboratory in chennai , Physical testing of polymer Laboratory in chennai , FTIR analysis of polymer Laboratory in chennai , Polymer testing Laboratoryoratory services Thermal analysis of polymer Laboratory in chennai , DSC Analysis of polymer Laboratory in chennai , Failure analysis of polymer Laboratory in chennai , Flexural testing Laboratory in chennai , Shear testing Laboratory in chennai , Intrinsic viscosity of polymers Laboratory in chennai , Inherent viscosity of polymers Laboratory in chennai , Relative viscosity of polymers Laboratory in chennai , Failure Analysis of Laboratory in chennai , Polymer testing Laboratory in chennai ... Rubber gaskets testing Laboratory in chennai , Rubber pads testing Laboratory in chennai , Rubber O- Rings testing Laboratory in chennai , Rubber granules testing Laboratory in chennai , Rubber sponges testing Laboratory in chennai , Rubber corks testing Laboratory in chennai , Rubber tires testing Laboratory in chennai , Rubber seals testing Laboratory in chennai , Rubber mats testing Laboratory in chennai , Rubber automotive parts testing Laboratory in chennai , Rubber aerospace parts testing Laboratory in chennai , Other Rubber products testing Laboratory in chennai , Rubber shoes testing Laboratory in chennai , Rubber soles testing Laboratory in chennai , Rubber gloves testing Laboratory in chennai , Rubber bellows testing Laboratory in chennai , Allied rubber products testing Laboratory in chennai , Testing and analysis of crumb rubber in chennai , Rubber degradation studies in chennai , Rubber compound analysis in chennai , Rubber product reverse engineering in chennai , Rubber material identification in chennai ... Natural rubber (NR) in chennai , Synthetic Polyisporene (IR) in chennai , Butyl rubber in chennai , Chlorobutyl rubber (CR) in chennai , Bromo butyl rubber in chennai , Polybutadiene in chennai , Styrene-butadiene rubber (SBR) in chennai , Nitrile butadiene rubber (NBR) in chennai , Hydrogenated nitrile-butadiene rubber in chennai , Carboxylated nitrile butadiene rubber in chennai , Chloroprene rubber in chennai , Ethylene propylene rubber (EPM) in chennai , Ethylene propylene diene rubber (EPDM) in chennai , Epichlorohydrin rubber in chennai , Polyacrylic rubber in chennai , Silicone rubber in chennai , Fluorosilicones in chennai , Fluorphosphazene in chennai , Fluorinated elastomer - Viton in chennai , Fluorinated elastomer - Aflas in chennai , Fluorinated elastomer - Kalrez in chennai , Polysulfides in chennai , Polyether block amides in chennai , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in chennai ...