AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

PVC - Polyvinyl chloride Material Testing
 
 
 
 
  • pvc Plastic Composition Testing lab, pvc plastic analysis, pvc plastic products testing lab, pvc Plastic product failure analysis, pvc Plastic identification lab, pvc Plastic testing services, pvc Plastic grade identification lab, pvc Plastic product testing services, pvc Plastic Testing Laboratory
  •  
    Physical and Mechanical properties of PVC Plastic Testing Lab
     
  • • Processing temperature range, °C -Injection
  • • Tensile strength at break, psi - D638
  • • Elongation at break, % - D638
  • • Tensile yield strength, psi - D638
  • • Compressive strength (rupture or yield) psi - D695
  • • Flexural strength (rupture or yield) psi - D790
  • • Tensile modulus, 103 psi - D638
  • • Compressive modulus, 103 psi - D695
  • • Flexural modulus, 103 psi (23°C) - D790
  • • Izod Impact, ft·lb/in of notch - D256A
  • • Hardness Shore D - D2240
  • • Deflection temperature °C 264 psi - D648
  • • Specific gravity (g/cm3) - D792
  • • Water Absorption, % (24 hrs.) - D570
  • • Dielectric strength short time, v/mil - D149
  •  
    Physical and Mechanical properties of Plastic Testing Lab
     
  • • Plastic identification testing
  • • Flammability testing
  • • Length of flame testing
  • • Heat cycle resistance testing
  • • Heat aging testing
  • • Chemical resistance testing
  • • Impact resistance testing
  • • Water resistance Odour testing
  • • Fading resistance testing
  • • Weather ability testing
  • • Suction testing
  • • Falling ball testing
  • • Wear resistance testing
  •  
    Types of Plastics Testing Offered:
     
  • • ABS Plastic Testing Lab
  • • Polypropylene Testing
  • • Polyethylene Testing
  • • PVC Testing lab
  • • Nylon 6-6 Testing lab
  • • PTFE Testing Services
  • • PET Testing Services
  • • ABS/PC alloys Plastic Testing Lab
  • • Acetal Plastic Testing Lab
  • • Acrylic Testing Lab
  • • Acrylic-styrene copolymer
  • • Acrylonitrile
  • • Cellulose Acetate
  • • Cellulose Acetate Butanal
  • • Cellulose Acetate Propionate
  • • Chlorinated polyethylene
  • • Epoxy resins
  • • Ethylene vinyl alcohol
  • • Fluoroplastic – PTFE
  • • Fluoroplastic – FEP
  • • Fluoroplastic – PVDF
  • • Ionomer
  • • Polyacrylether ketone
  • • Polyetheether ketone
  • • Liquid Crystal Polymer
  • • Melamine formaldehyde
  • • Phenolics
  • • Nylon 6
  • • Nylon 6/6
  • • Nylon 6/10
  • • Nylon 6/12
  • • Nylon 4/6
  • • Nylon 11
  • • Nylon 12
  • • Aromatic polyamide
  • • Polyamide-Polyimide
  • • Polyethylene and copolymers
  • • Polycarbonate
  • • Polybutylene Terephthalate
  • • Polycyclohexene dimethanol terephthalate
  • • PET: Polyethylene terephthalate
  • • PET/ PC blends
  • • Polyetherimide
  • • Polyethersulfone
  • • Polyimide
  • • Polymethylpentene
  • • Polyphenylene oxide
  • • Polyphenylene sulfide
  • • Polyphthalamide
  • • Polypropylene and copolymers
  • • Polystyrene and copolymers
  • • Polyurethanes
  • • Polyvinylidene chloride
  • • Silicones
  • • Polysulfones
  • • Polyethersulfones
  • • Polyureas
  • • PVC: Polyvinyl chloride
  • • Polyvinylchloride (chlorinated)
  •  
    Types of Plastics Testing Lab
     
  • • Polyarylate plastic testing lab
  • • Polyurethane (PUR) plastic testing lab
  • • Acrylonitrile Ethylene Styrene (AES) plastic testing lab
  • • Polyaryletherketone (PAEK) plastic testing lab
  • • Polyethylene (PE) plastic testing lab
  • • Thermoplastic Elastomer (TPE) plastic testing lab
  • • Polyurethane Thermoset Elastomer (TSU) plastic testing lab
  • • Acrylonitrile Styrene (AS) plastic testing alab
  • • Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
  • • Polybutadiene Rubber (PBR) plastic testing lab
  • • SiliconeAlphamethylstyrene (AMS) plastic testing lab
  • • Polycaprolactone (PCL) plastic testing lab
  • • Styrene Acrylonitrile (SAN) plastic testing lab
  • • Biodegradable Polymers plastic testing lab
  • • Styrene Acrylonitrile Silicone (SAS) plastic testing lab
  • • Cellulose Acetate (CA) plastic testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
  • • Diallyl Phthalate (DAP) plastic testing lab
  • • Polyether Imide (PEI) plastic testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
  • • Dicyclopentadiene (DCPD) plastic testing lab
  • • Epoxy plastic testing and analysis lab
  • • Polyethylene Naphthalate (PEN) plastic testing lab
  • • Thermoplastic Polyurethane (TPU) plastic testing lab
  • • Fluoropolymer plastic testing lab
  • • Polyimide (PI) plastic testing lab
  • • FuranPolylactic Acid (PLA) plastic testing lab
  • • Thermoset (TS) plastic testing lab
  • • Ionomer plastic testing lab
  • • Polymethylpentene (PMP) plastic testing lab
  • • Thermoset Elastomer (TSE) plastic testing lab
  • • Polyphenylene Ether (PPE) plastic testing lab
  • • Vinyl Alcohol (VOH) plastic testing lab
  • • Methyl Cellulose (MC) plastic testing lab
  • • Polyphenylene Sulfide (PPS) plastic testing lab
  • • Methyl Methacrylate (MM) plastic testing lab
  •  
    POLYMER PRODUCTS TESTING LAB
     
  • • Polyarylate polymer testing lab
  • • Polyurethane (PUR) polymer testing lab
  • • Acrylonitrile Ethylene Styrene (AES) polymer testing lab
  • • Polyaryletherketone (PAEK) polymer testing lab
  • • Polyethylene (PE) polymer testing lab
  • • Thermopolymer Elastomer (TPE) polymer testing lab
  • • Polyurethane Thermoset Elastomer (TSU) polymer testing lab
  • • Acrylonitrile Styrene (AS) polymer testing lab
  • • Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
  • • Polybutadiene Rubber (PBR) polymer testing lab
  • • SiliconeAlphamethylstyrene (AMS) polymer testing lab
  • • Polycaprolactone (PCL) polymer testing lab
  • • Styrene Acrylonitrile (SAN) polymer testing lab
  • • Biodegradable Polymers polymer testing lab
  • • Styrene Acrylonitrile Silicone (SAS) polymer testing lab
  • • Cellulose Acetate (CA) polymer testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
  • • Diallyl Phthalate (DAP) polymer testing lab
  • • Polyether Imide (PEI) polymer testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
  • • Dicyclopentadiene (DCPD) polymer testing lab
  • • Epoxy polymer testing lab
  • • Polyethylene Naphthalate (PEN) polymer testing lab
  • • Thermopolymer Polyurethane (TPU) polymer testing lab
  • • Fluoropolymer polymer testing lab
  • • Polyimide (PI) polymer testing lab
  • • FuranPolylactic Acid (PLA) polymer testing lab
  • • Thermoset (TS) polymer testing lab
  • • Ionomer polymer testing lab
  • • Polymethylpentene (PMP) polymer testing lab
  • • Thermoset Elastomer (TSE) polymer testing lab
  • • Polyphenylene Ether (PPE) polymer testing lab
  • • Vinyl Alcohol (VOH) polymer testing lab
  • • Methyl Cellulose (MC) polymer testing lab
  • • Polyphenylene Sulfide (PPS) polymer testing lab
  • • Methyl Methacrylate (MM) polymer testing lab
  • • Polymer product testing lab
  • • Polymer failure analysis lab
  • • Polymer reverse engineering lab
  • • Polymer analytical testing lab
  • • Mechanical testing of polymer lab
  • • polymers product testing lab
  • • Tensile testing of polymer lab
  • • Compression testing lab
  • • Bend testing O polymer lab
  • • Chemical analysis of polymer lab
  • • Physical testing of polymer lab
  • • FTIR analysis of polymer lab
  • • Polymer testing laboratory services
  • • Thermal analysis of polymer lab
  • • DSC Analysis of polymer lab
  • • Failure analysis of polymer lab
  • • Flexural testing lab
  • • Shear testing lab
  • • Intrinsic viscosity of polymers lab
  • • Inherent viscosity of polymers lab
  • • Relative viscosity of polymers lab
  • • Failure Analysis of lab
  • • Polymer testing lab
  •  
    RUBBER PRODUCTS TESTING LAB
     
  • • Rubber gaskets testing lab
  • • Rubber pads testing lab
  • • Rubber O- Rings testing lab
  • • Rubber granules testing lab
  • • Rubber sponges testing lab
  • • Rubber corks testing lab
  • • Rubber tires testing lab
  • • Rubber seals testing lab
  • • Rubber mats testing lab
  • • Rubber automotive parts testing lab
  • • Rubber aerospace parts testing lab
  • • Other Rubber products testing lab
  • • Rubber shoes testing lab
  • • Rubber soles testing lab
  • • Rubber gloves testing lab
  • • Rubber bellows testing lab
  • • Allied rubber products testing lab
  • • Testing and analysis of crumb rubber
  • • Rubber degradation studies
  • • Rubber compound analysis
  • • Rubber product reverse engineering
  • • Rubber material identification
  •  
    Types of Rubber Tested
     
  • • Natural rubber (NR)
  • • Synthetic Polyisporene (IR)
  • • Butyl rubber
  • • Chlorobutyl rubber (CR)
  • • Bromo butyl rubber
  • • Polybutadiene
  • • Styrene-butadiene rubber (SBR)
  • • Nitrile butadiene rubber (NBR)
  • • Hydrogenated nitrile-butadiene rubber
  • • Carboxylated nitrile butadiene rubber
  • • Chloroprene rubber
  • • Ethylene propylene rubber (EPM)
  • • Ethylene propylene diene rubber (EPDM)
  • • Epichlorohydrin rubber
  • • Polyacrylic rubber
  • • Silicone rubber
  • • Fluorosilicones
  • • Fluorphosphazene
  • • Fluorinated elastomer - Viton
  • • Fluorinated elastomer - Aflas
  • • Fluorinated elastomer - Kalrez
  • • Polysulfides
  • • Polyether block amides
  • • Chlorosulfonated polyethylene (Hypalon)
  • • Ethylene vinyl acetate (EVA)
  •  
    Thermoplastic Elastomers Tested
     
  • • Polyolefin
  • • Copolyester-ether
  • • Polyester
  • • Styrene-Butadiene block copolymers
  • • Sytrene-Ethylene block copolymers
  • • Polyester polyurethane
  • • Polyether polyurethane
  •  
    RUBBER, PLASTIC, Sponge , Vinyl FOAM , Flexible Material Testing
     
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM 1149)
  • Cracking Outdoors (ASTM d1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Izod Impact Strength (ASTM D256)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  •  
    Types of Material Testing Lab
     
    pvc material testing lab in coimbatore , pvc pipe testing lab in coimbatore , rubber testing lab in coimbatore , polymer testing lab in coimbatore , latex testing lab in coimbatore , plastic testing lab in coimbatore , abs plastic testing lab in coimbatore , packaging material testing lab in coimbatore , food packaging material testing lab in coimbatore , civil material testing lab in coimbatore , construction material testing lab in coimbatore , spring testing lab in coimbatore , wood testing lab in coimbatore , paint testing lab in coimbatore , bricks testing lab in coimbatore , resin testing lab in coimbatore , thermoplastic testing lab in coimbatore , foam testing lab in coimbatore , sponge testing lab in coimbatore , heavy metal testing in coimbatore , coal testing lab in coimbatore , coal coke testing in coimbatore , thermal coal testing in coimbatore , metallurgical coke testing in coimbatore , petrolium coke testing in coimbatore , fertilizer testing in coimbatore , cement testing lab in coimbatore , fly ash testing in coimbatore , aggregates testing lab in coimbatore , rock testing lab in coimbatore , textile testing lab in coimbatore , fabric and garment testing lab in coimbatore , fabric testing lab in coimbatore , asphalt testing lab in coimbatore , uts utm testing in coimbatore , triaxial rock testing in coimbatore ...
     
    Types of Plastics Testing Lab
     
    Polyarylate plastic testing lab in coimbatore , Polyurethane (PUR) plastic testing lab in coimbatore , Acrylonitrile Ethylene Styrene (AES) plastic testing lab in coimbatore , Polyaryletherketone (PAEK) plastic testing lab in coimbatore , Polyethylene (PE) plastic testing lab in coimbatore , Thermoplastic Elastomer (TPE) plastic testing lab in coimbatore , Polyurethane Thermoset Elastomer (TSU) plastic testing lab in coimbatore , Acrylonitrile Styrene (AS) plastic testing alab in coimbatore , Acrylonitrile Styrene Acrylate (ASA) plastic testing lab in coimbatore , Polybutadiene Rubber (PBR) plastic testing lab in coimbatore , SiliconeAlphamethylstyrene (AMS) plastic testing lab in coimbatore , Polycaprolactone (PCL) plastic testing lab in coimbatore , Styrene Acrylonitrile (SAN) plastic testing lab in coimbatore , Biodegradable Polymers plastic testing lab in coimbatore , Styrene Acrylonitrile Silicone (SAS) plastic testing lab in coimbatore , Cellulose Acetate (CA) plastic testing lab in coimbatore , PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab in coimbatore , Diallyl Phthalate (DAP) plastic testing lab in coimbatore , Polyether Imide (PEI) plastic testing lab in coimbatore , Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab in coimbatore , Dicyclopentadiene (DCPD) plastic testing lab in coimbatore , Epoxy plastic testing and analysis lab in coimbatore , Polyethylene Naphthalate (PEN) plastic testing lab in coimbatore , Thermoplastic Polyurethane (TPU) plastic testing lab in coimbatore , Fluoropolymer plastic testing lab in coimbatore , Polyimide (PI) plastic testing lab in coimbatore , FuranPolylactic Acid (PLA) plastic testing lab in coimbatore , Thermoset (TS) plastic testing lab in coimbatore , Ionomer plastic testing lab in coimbatore , Polymethylpentene (PMP) plastic testing lab in coimbatore , Thermoset Elastomer (TSE) plastic testing lab in coimbatore , Polyphenylene Ether (PPE) plastic testing lab in coimbatore , Vinyl Alcohol (VOH) plastic testing lab in coimbatore , Methyl Cellulose (MC) plastic testing lab in coimbatore , Polyphenylene Sulfide (PPS) plastic testing lab in coimbatore , Methyl Methacrylate (MM) plastic testing lab in coimbatore ...
     
    POLYMER PRODUCTS TESTING LAB
     
    Polyarylate polymer testing lab in coimbatore , Polyurethane (PUR) polymer testing lab in coimbatore , Acrylonitrile Ethylene Styrene (AES) polymer testing lab in coimbatore , Polyaryletherketone (PAEK) polymer testing lab in coimbatore , Polyethylene (PE) polymer testing lab in coimbatore , Thermopolymer Elastomer (TPE) polymer testing lab in coimbatore , Polyurethane Thermoset Elastomer (TSU) polymer testing lab in coimbatore , Acrylonitrile Styrene (AS) polymer testing lab in coimbatore , Acrylonitrile Styrene Acrylate (ASA) polymer testing lab in coimbatore , Polybutadiene Rubber (PBR) polymer testing lab in coimbatore , SiliconeAlphamethylstyrene (AMS) polymer testing lab in coimbatore , Polycaprolactone (PCL) polymer testing lab in coimbatore , Styrene Acrylonitrile (SAN) polymer testing lab in coimbatore , Biodegradable Polymers polymer testing lab in coimbatore , Styrene Acrylonitrile Silicone (SAS) polymer testing lab in coimbatore , Cellulose Acetate (CA) polymer testing lab in coimbatore , PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab in coimbatore , Diallyl Phthalate (DAP) polymer testing lab in coimbatore , Polyether Imide (PEI) polymer testing lab in coimbatore , Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab in coimbatore , Dicyclopentadiene (DCPD) polymer testing lab in coimbatore , Epoxy polymer testing lab in coimbatore , Polyethylene Naphthalate (PEN) polymer testing lab in coimbatore , Thermopolymer Polyurethane (TPU) polymer testing lab in coimbatore , Fluoropolymer polymer testing lab in coimbatore , Polyimide (PI) polymer testing lab in coimbatore , FuranPolylactic Acid (PLA) polymer testing lab in coimbatore , Thermoset (TS) polymer testing lab in coimbatore , Ionomer polymer testing lab in coimbatore , Polymethylpentene (PMP) polymer testing lab in coimbatore , Thermoset Elastomer (TSE) polymer testing lab in coimbatore , Polyphenylene Ether (PPE) polymer testing lab in coimbatore , Vinyl Alcohol (VOH) polymer testing lab in coimbatore , Methyl Cellulose (MC) polymer testing lab in coimbatore , Polyphenylene Sulfide (PPS) polymer testing lab in coimbatore , Methyl Methacrylate (MM) polymer testing lab in coimbatore , Polymer product testing lab in coimbatore , Polymer failure analysis lab in coimbatore , Polymer reverse engineering lab in coimbatore , Polymer analytical testing lab in coimbatore , Mechanical testing of polymer lab in coimbatore , polymers product testing lab in coimbatore , Tensile testing of polymer lab in coimbatore , Compression testing lab in coimbatore , Bend testing O polymer lab in coimbatore , Chemical analysis of polymer lab in coimbatore , Physical testing of polymer lab in coimbatore , FTIR analysis of polymer lab in coimbatore , Polymer testing laboratory services Thermal analysis of polymer lab in coimbatore , DSC Analysis of polymer lab in coimbatore , Failure analysis of polymer lab in coimbatore , Flexural testing lab in coimbatore , Shear testing lab in coimbatore , Intrinsic viscosity of polymers lab in coimbatore , Inherent viscosity of polymers lab in coimbatore , Relative viscosity of polymers lab in coimbatore , Failure Analysis of lab in coimbatore , Polymer testing lab in coimbatore ...
     
    RUBBER PRODUCTS TESTING LAB
     
    Rubber gaskets testing lab in coimbatore , Rubber pads testing lab in coimbatore , Rubber O- Rings testing lab in coimbatore , Rubber granules testing lab in coimbatore , Rubber sponges testing lab in coimbatore , Rubber corks testing lab in coimbatore , Rubber tires testing lab in coimbatore , Rubber seals testing lab in coimbatore , Rubber mats testing lab in coimbatore , Rubber automotive parts testing lab in coimbatore , Rubber aerospace parts testing lab in coimbatore , Other Rubber products testing lab in coimbatore , Rubber shoes testing lab in coimbatore , Rubber soles testing lab in coimbatore , Rubber gloves testing lab in coimbatore , Rubber bellows testing lab in coimbatore , Allied rubber products testing lab in coimbatore , Testing and analysis of crumb rubber in coimbatore , Rubber degradation studies in coimbatore , Rubber compound analysis in coimbatore , Rubber product reverse engineering in coimbatore , Rubber material identification in coimbatore ...
     
    Types of Rubber Testing Lab
     
    Natural rubber (NR) in coimbatore , Synthetic Polyisporene (IR) in coimbatore , Butyl rubber in coimbatore , Chlorobutyl rubber (CR) in coimbatore , Bromo butyl rubber in coimbatore , Polybutadiene in coimbatore , Styrene-butadiene rubber (SBR) in coimbatore , Nitrile butadiene rubber (NBR) in coimbatore , Hydrogenated nitrile-butadiene rubber in coimbatore , Carboxylated nitrile butadiene rubber in coimbatore , Chloroprene rubber in coimbatore , Ethylene propylene rubber (EPM) in coimbatore , Ethylene propylene diene rubber (EPDM) in coimbatore , Epichlorohydrin rubber in coimbatore , Polyacrylic rubber in coimbatore , Silicone rubber in coimbatore , Fluorosilicones in coimbatore , Fluorphosphazene in coimbatore , Fluorinated elastomer - Viton in coimbatore , Fluorinated elastomer - Aflas in coimbatore , Fluorinated elastomer - Kalrez in coimbatore , Polysulfides in coimbatore , Polyether block amides in coimbatore , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in coimbatore ...