AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

NYLON SUPPLIERS
 
 
 
PLATES / PIPES & TUBES / SHEET / FORGING / FITTINGS / CASTINGS / STRUCTURAL STEEL etc...
 
Alloy Steel / Carbon Steel / S.S / Duplex Steel / Super Duplex / Nickel Alloy / Monel / Inconel / Hastelloy / Titanium / Alloy 20 /Copper Nickel..
 
Nylon Suppliers
 
 
  • Low-density polyethylene (LDPE)
  • High-density polyethylene (HDPE)
  • Polypropylene (PP)
  • Polyvinyl chloride (PVC)
  • Polystyrene (PS)
  • Nylon, nylon 6, nylon 6,6
  • Teflon (Polytetrafluoroethylene)
  • Thermoplastic polyurethanes (TPU)
  •  
    NYLON 6 Polymers Suppliers
     
  • NYLON 6 Polymers
  • Unfilled
  • SGP
  • Nylon 6 Unfilled General Purpose High Strength, toughness & light weight, Excellent ductility, abrasion resistance, Good electrical insulation, easily machined and mould release. Toughened grades will exhibit higher mechanical strength. Gears, Bushings & Bearings, Plugs & Sockets, Switch parts, Pulleys, Wear Plates, Terminals & Connectors.
  • SGPC
  • Nylon 6 Unfilled General Purpose Colours
  • Glass Filled
  • SGR10
  • Nylon 6 Glass Reinforced 10%
  • High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mould release Good dimensional stability and reduced shrinkage. Swich Parts, Connectors, Sockets, Gears, Bearings, Bushes, Knobs / Cams, Terminals, Fuse Box, Motor Insulation Parts.
  • SGR15
  • Nylon 6 Glass Reinforced 15%
  • SGR30
  • Nylon 6 Glass Reinforced 30%
  •  
    SMR15 Nylon 6 Mineral Suppliers
     
  • SMR15 Nylon 6 Mineral 15% Good mechancial & thermal properties Excellent surface finish and gloss, Warpage free moulding, High heat resistance, Good dimensional stability, suitable for online Painting. Automotive Parts, Wheel cover, Instrument housing, Lamp Housing, Cooker Handle, Heater Grill, Throttle, Engine Wood, Flask Lid, Fuel Pumps, Brackets.
  • SMR30 Nylon 6 Mineral 30%
  • UV Stabilised
  • SGRUV15 Nylon 6 UV Stabilised Glass Filled 15% Good Rigidity, High Toughness, Good Dimensionability, High HDT under load. Good retention of mechanical properties after long term exposure to sunlight or UV radiation. Userful in Exterior automobile applications which are exposed to sunlight and Sports equipments.
  • SGRUV30 Nylon 6 UV Stabilised Glass Filled 15%
  • Flame Retardant SGR15FR Nylon 6 Flame Retardant VO Glass Filled 15% Good mechancial & thermal properties, Warpage free mouldings, dimensional stability, Resistance to creep and fatigue Resistance to arc-tracking. Meets UL94 VO rating. Switch internal parts, Connectors, Terminal Block, Coil Former, Relay Base, MCB Casing Field side insulation, PCB Frame & Guide Rail.
  • SGR30FR Nylon 6 Flame Retardant VO Glass Filled 30%
  • Super Tough Alloys
  • SMT35 Nylon 6 Super Tough Alloy High elogation, High impact strength, Excellent flexibility.Cable tie, Automobile fuel lines, Wring harness, Sprocket housing.
  • MoS2 Filled SGMS28 Nylon 6 Unfilled Lubricated with MoS2 Excellent abrasion & wear resistance, Good surface finish & dimensional stability, High Elongation & Easy Processability, Dry lubrication for anti-friction & reduced wear. Gears, Bushes, Bearings, Coil former, Coil links, Cam/CAm roller, Sleeves, Acuators/t
  •  
    NYLON 66 Polymers Suppliers
     
     
  • NYLON 66 Polymers
  • Unfilled
  • RGP
  • Nylon 66 Unfilled General Purpose High Strength, toughness & light weight, Excellent ductility, abrasion resistance, Good electrical insulation, easily machined and mould release. Toughened grades will exhibit higher mechanical strength. Gears, Bushings & Bearings, Plugs & Sockets, Switch parts, Pulleys, Wear Plates, Terminals & Connectors.
  • RGPC
  • Nylon 6 Unfilled General Purpose Colours
  • Glass Filled
  • RGR20
  • Nylon 66 Glass Reinforced 20% High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mould release Good dimensional stability and reduced shrinkage. Swich Parts, Connectors, Sockets, Gears, Bearings, Bushes, Knobs / Cams, Terminals, Fuse Box, Motor Insulation Parts.
  • RGR33
  • Nylon 6 Glass Reinforced 33%
  • UV Stabilised
  • RGRUV20
  • Nylon 66
  • UV Stabilised Glass Filled 20% Good Rigidity, High Toughness, Good Dimensionability, High HDT under load. Good retention of mechanical properties after long term exposure to sunlight or UV radiation. Userful in Exterior automobile applications which are exposed to sunlight and Sports equipments.
  • RGRUV33 Nylon
  • 6 UV Stabilised Glass Filled 33%
  • Flame Retardant
  • RGR20FR Nylon
  • 66 Flame Retardant VO Glass Filled 20% Good mechancial & thermal properties, Warpage free mouldings, dimensional stability, Resistance to creep and fatigue Resistance to arc-tracking. Meets UL94 VO rating. Switch internal parts, Connectors, Terminal Block, Coil Former, Relay Base, MCB Casing Field side insulation, PCB Frame & Guide Rail.
  • RGR33FR Nylon
  • 6 Flame Retardant VO Glass Filled 33%
  • MoS2 Filled
  • RGMS30
  • Nylon 66 Unfilled Lubricated with MoS2 Excellent abrasion & wear resistance, Good surface finish & dimensional stability, High Elongation & Easy Processability, Dry lubrication for anti-friction & reduced wear. Gears, Bushes, Bearings, Coil former, Coil links, Cam/CAm roller, Sleeves, Acuator
  •  
    olypropylene Polymers (PP) Suppliers
     
     
  • olypropylene Polymers (PP)
  • Unfilled UV Stabilised
  • PGPUV
  • PP Unfilled UV Stabilised Unfilled Polypropylene enhanced with suitable UV stabilisers which is suitable for outdoor application. Good processabilithy, retains nominal percentage mechancial properties in actual usage condition. Case Glove Box, Console Inside cover front, Air conditioner end cap
  • Glass Filled
  • PGR10
  • PP Glass Filled 10% Excellent dimensional stability and stiffness, Chemically coupled glass reinforced and heat stabilised material offer excellent mechancial and thermal properties with reduced mould shrinkage. Easy Processability. Thin wall applications, Automotive Application, Helmet Box, Mirror Housing, Appliances.
  • PGR20
  • PP Glass Filled 10%
  • PGR30
  • PP Glass Filled 30%
  • Talc Filled PTR20
  • PP Talc Filled 20% Good surface finish, Moderate mechancial and thermal properties, Good stiffness Chemically coupled glass reinforced and heat stabilised material offer excellent mechancial and thermal properties with reduced mould shrinkage. Easy Processability Thin wall applications, Automotive Application, Helmet Box, Mirror Housing, Appliances.
  • PP Talc Filled 30%
  • Nylon 6 UV Stabilised Glass Filled 33%
  •  
    m PPO Polymers Suppliers
     
  • m PPO Polymers
  • unfilled
  • NGP
  • PPO Unfilled General Purpose Excellent Dimensional stability, Low moisture absorption, High mechanical and dielectrical strength, Ourstanding Electrical Properties Automotive Interior & Exterior parts, Electrical appliances, Housing, Impellors for pumps
  • NGR20
  • PP Glass Filled 20%
  • NGR30
  • PP Glass Filled 30%
  • Glass Filled
  • NGR20
  • PPO Glass Filled 20% Excellent Dimensional stability, Low mositure absorption, Excellent Strength and Stiffness Impellers for pumps, Water filters, Water mixing valves, Central heating parts,Water meter components and Water filters
  •  
    ABS Polymers Suppliers
     
  • ABS Polymers
  • Glass Filled
  • AGR 15
  • ABS Glass Filled 15%
  • AGR 30 PPO Glass Filled 30%
  • Reduced shrinkage, Good mechanical and thermal properties, Good Surface Finish, Special property enhancement for resistant to wear Textile pulleys, and machine parts, Airconditioner fans, Impellers, Brackets, Motor casing, Meter housing
  •  
    Polyacetal Polymers(POM) Suppliers
     
  • Polyacetal Polymers(POM)
  • Unfilled
  • FGP9 Black
  • FGP27 Black POM Unfilled Co-Polymer Excellent balance of stiffness and toughness, Good Electrical and mechanical properties, Good chemical resistance, Two varies MFI levels available to suit different component geometry and application. Because of their excellent thermal and mechanical properties a POM compounds find extensive use in the Automotive, appliance, and electronic industries.
  • Synthetic polymers are human-made polymers derived from petroleum oil. From the utility point of view they can be classified into three main categories: thermoplastics, elastomers and synthetic fibers. They are found commonly in a variety of consumer products such as honey, glue, etc.
  •  
    Styrene Acrylonitrile Polymers(SAN) Suppliers
     
  • Styrene Acrylonitrile Polymers(SAN)
  • Glass Filled
  • SANGR20
  • SAN Glass Filled 20%
  • Excellent dimensional stability, Good impact strength, (for impact modified grades), High creep resistance and chemical resistance Battery Cases, Window Panel, Speedometer Cover, Instrumental Panels, Terminal Box, instrument lenses, appliances knobs
  •  
    List of Polymer Suppliers
     
  • Low-density polyethylene LDPE Chemically inert, flexible, insulator
  • Squeeze bottles, toys, flexible pipes, insulation cover (electric wires), six pack rings, etc.
  •  
  • High-density polyethylene HDPE Inert, thermally stable,tough and high tensile strength
  • Bottles, pipes,inner insulation (dielectric) of coax cable (see also PTFE), plastic bags, etc.
  •  
  • Polypropylene PP Resistant to acids and alkalies,High tensile strength
  • Auto parts, industrial fibers, food containers, liner in bags, dishware and as a wrapping material for textiles and food
  •  
  • Polystyrene (thermocole) PS Thermal insulator. Properties depends on the form, expanded form is tough and rigid
  • Petri dishes, CD case, plastic cutlery
  •  
  • Polytetrafluoroethylene PTFE Very low coefficient of friction, excellent dielectric properties, chemically inert
  • Low friction bearings, non-stick pans, inner insulation (dielectric) of coax cable (see also HDPE), coating against chemical attack etc.
  •  
  • Polyvinyl chloride PVC Insulator, flame retardant, chemically inert
  • Pipe ( mainly draining), fencing, lawn chairs, hand-bags, curtain clothes, non-food bottles, raincoats, toys, vinyl flooring, electrical installation insulations, etc.
  •  
    Bakelite Suppliers
     
  • Bakelite
  • Phenol-formaldehyde resin
  • High electric, heat and chemical resistance
  • Insulation of wires, manufacturing sockets, electrical devices, brake pads, etc.
  •  
    Kevlar Suppliers
     
  • Kevlar
  • Para-aramid fibre
  • High tensile strength
  • Manufacturing armour, sports and musical equipment. Used in the field of cryogenics
  •  
    Twaron Polymer Suppliers
     
  • Twaron
  • Para-aramid Heat resistant and strong fibre
  • Bullet-proof body armor, helmets, brake pads, ropes, cables and optical fibre cables, etc. and as an asbestos substitute
  •  
    Mylar Suppliers
     
  • Mylar
  • Polyethylene terephthalate film
  • High strength and stiffness, less permeable to gases, almost reflects light completely
  • Food packaging, transparent covering over paper, reflector for rollsigns and solar cooking stoves
  •  
    Neoprene Suppliers
     
  • Neoprene
  • Polychloroprene
  • Chemically inert
  • Manufacturing gaskets, corrosion resistant coatings, waterproof seat covers, substitute for corks and latex
  •  
    Nylon Suppliers
     
  • Nylon
  • Polyamide
  • Silky, thermoplastic and resistant to biological and chemical agents
  • Stockings, fabrics, toothbrushes. Molded nylon is used in making machine screws, gears etc.
  •  
    Nomex Suppliers
     
  • Nomex
  • Meta-aramid polymer
  • Excellent thermal, chemical, and radiation resistance, rigid, durable and fireproof.
  • Hood of firefighter's mask, electrical lamination of circuit boards and transformer cores and in Thermal Micrometeoroid Garment
  •  
    Orlon Suppliers
     
  • Orlon
  • Polyacrylonitrile (PAN)
  • Wool-like, resistant to chemicals, oils, moths and sunlight
  • Used for making clothes and fabrics like sweaters, hats, yarns, rugs, etc., and as a precursor of carbon fibres
  •  
    Rilsan Suppliers
     
  • Rilsan
  • Polyamide 11 & 12
  • Bioplastic
  • Used in high-performance applications such as sports shoes, electronic device components, automotive fuel lines, pneumatic airbrake tubing, oil and gas flexible pipes and control fluid umbilicals, and catheters.
  •  
    Technora Suppliers
     
  • Technora
  • Copolyamid
  • High tensile strength, resistance to corrosion, heat, chemicals and saltwater
  • Used for manufacturing optical fiber cables, umbilical cables, drumheads, automotive industry, ropes, wire ropes and cables
  •  
    Teflon Suppliers
     
  • Teflon
  • Polytetrafluoroethylene (PTFE)
  • Very low coefficient of friction, excellent dielectric properties, high melting, chemically inert
  • Plain bearings, gears, non-stick pans, etc. due to its low friction. Used as a tubing for highly corrosive chemicals.
  •  
    Ultem Suppliers
     
  • Ultem
  • Polyimide
  • Heat,flame and solvent resistant. Has high dielectric strength
  • Used in medical and chemical instrumentation, also in guitar picks
  •  
    Vectran Suppliers
     
  • Vectran
  • aromatic polyester
  • High thermal and chemical stability. Golden color. Has high strength, low creep, and is moisture resistant
  • Used as reinforcing fibres for ropes, cables, sailcloth. Also used in manufacturing badminton strings, bike tires and in electronics applications. Is the key component of a line of inflatable spacecraft developed by Bigelow Aerospace
  •  
    Viton Suppliers
     
  • Viton
  • Polytetrafluoroethylene (PTFE)
  • Elastomer
  • Depends on the grade of the polymer. Viton B is used in chemical process plants and gaskets.
  •  
    Zylon Suppliers
     
  • Zylon
  • poly-p-phenylene-2,6-benzobisoxazole (PBO)
  • Very high tensile strength and thermal stability
  • Used in tennis racquets, table tennis blades, body armor, etc.
  •  
    Addition polymer Suppliers
     
  • Addition polymer
  • Condensation polymer
  • Cross-link
  • In situ polymerization
  • Metallocene
  • Plasma polymerization
  • Polymer characterization
  • Polymer physics
  • Reversible addition−fragmentation chain transfer polymerization
  • Ring-opening polymerization
  • Sequence-controlled polymers
  • Sol-gel
  • Ziegler–Natta catalyst
  •  
    Nylon Suppliers
     
     
  • Low-density polyethylene (LDPE) Suppliers
  • High-density polyethylene (HDPE) Suppliers
  • Polypropylene (PP) Suppliers
  • Polyvinyl chloride (PVC) Suppliers
  • Polystyrene (PS) Suppliers
  • Nylon, nylon 6, nylon 6,6 Suppliers
  • Teflon (Polytetrafluoroethylene) Suppliers
  • Thermoplastic polyurethanes (TPU) Suppliers
  •  
    NYLON 6 Polymers Suppliers
     
  • NYLON 6 Polymers Suppliers
  • Unfilled Suppliers
  • SGP Suppliers
  • Nylon 6 Unfilled General Purpose High Strength, toughness & light weight, Excellent ductility, abrasion resistance, Good electrical insulation, easily machined and mould release. Toughened grades will exhibit higher mechanical strength. Gears, Bushings & Bearings, Plugs & Sockets, Switch parts, Pulleys, Wear Plates, Terminals & Connectors. Suppliers
  • SGPC Suppliers
  • Nylon 6 Unfilled General Purpose Colours Suppliers
  • Glass Filled Suppliers
  • SGR10 Suppliers
  • Nylon 6 Glass Reinforced 10% Suppliers
  • High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mould release Good dimensional stability and reduced shrinkage. Swich Parts, Connectors, Sockets, Gears, Bearings, Bushes, Knobs / Cams, Terminals, Fuse Box, Motor Insulation Parts. Suppliers
  • SGR15 Suppliers
  • Nylon 6 Glass Reinforced 15% Suppliers
  • SGR30 Suppliers
  • Nylon 6 Glass Reinforced 30% Suppliers
  •  
    SMR15 Nylon 6 Mineral Suppliers
     
  • SMR15 Nylon 6 Mineral 15% Good mechancial & thermal properties Excellent surface finish and gloss, Warpage free moulding, High heat resistance, Good dimensional stability, suitable for online Painting. Automotive Parts, Wheel cover, Instrument housing, Lamp Housing, Cooker Handle, Heater Grill, Throttle, Engine Wood, Flask Lid, Fuel Pumps, Brackets. Suppliers
  • SMR30 Nylon 6 Mineral 30% Suppliers
  • UV Stabilised Suppliers
  • SGRUV15 Nylon 6 UV Stabilised Glass Filled 15% Good Rigidity, High Toughness, Good Dimensionability, High HDT under load. Good retention of mechanical properties after long term exposure to sunlight or UV radiation. Userful in Exterior automobile applications which are exposed to sunlight and Sports equipments. Suppliers
  • SGRUV30 Nylon 6 UV Stabilised Glass Filled 15% Suppliers
  • Flame Retardant SGR15FR Nylon 6 Flame Retardant VO Glass Filled 15% Good mechancial & thermal properties, Warpage free mouldings, dimensional stability, Resistance to creep and fatigue Resistance to arc-tracking. Meets UL94 VO rating. Switch internal parts, Connectors, Terminal Block, Coil Former, Relay Base, MCB Casing Field side insulation, PCB Frame & Guide Rail. Suppliers
  • SGR30FR Nylon 6 Flame Retardant VO Glass Filled 30% Suppliers
  • Super Tough Alloys Suppliers
  • SMT35 Nylon 6 Super Tough Alloy High elogation, High impact strength, Excellent flexibility.Cable tie, Automobile fuel lines, Wring harness, Sprocket housing. Suppliers
  • MoS2 Filled SGMS28 Nylon 6 Unfilled Lubricated with MoS2 Excellent abrasion & wear resistance, Good surface finish & dimensional stability, High Elongation & Easy Processability, Dry lubrication for anti-friction & reduced wear. Gears, Bushes, Bearings, Coil former, Coil links, Cam/CAm roller, Sleeves, Acuators/t Suppliers
  •  
    NYLON 66 Polymers Suppliers
     
     
  • NYLON 66 Polymers Suppliers
  • Unfilled Suppliers
  • RGP Suppliers
  • Nylon 66 Unfilled General Purpose High Strength, toughness & light weight, Excellent ductility, abrasion resistance, Good electrical insulation, easily machined and mould release. Toughened grades will exhibit higher mechanical strength. Gears, Bushings & Bearings, Plugs & Sockets, Switch parts, Pulleys, Wear Plates, Terminals & Connectors. Suppliers
  • RGPC Suppliers
  • Nylon 6 Unfilled General Purpose Colours Suppliers
  • Glass Filled Suppliers
  • RGR20 Suppliers
  • Nylon 66 Glass Reinforced 20% High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mould release Good dimensional stability and reduced shrinkage. Swich Parts, Connectors, Sockets, Gears, Bearings, Bushes, Knobs / Cams, Terminals, Fuse Box, Motor Insulation Parts. Suppliers
  • RGR33 Suppliers
  • Nylon 6 Glass Reinforced 33% Suppliers
  • UV Stabilised Suppliers
  • RGRUV20 Suppliers
  • Nylon 66 Suppliers
  • UV Stabilised Glass Filled 20% Good Rigidity, High Toughness, Good Dimensionability, High HDT under load. Good retention of mechanical properties after long term exposure to sunlight or UV radiation. Userful in Exterior automobile applications which are exposed to sunlight and Sports equipments. Suppliers
  • RGRUV33 Nylon Suppliers
  • 6 UV Stabilised Glass Filled 33% Suppliers
  • Flame Retardant Suppliers
  • RGR20FR Nylon Suppliers
  • 66 Flame Retardant VO Glass Filled 20% Good mechancial & thermal properties, Warpage free mouldings, dimensional stability, Resistance to creep and fatigue Resistance to arc-tracking. Meets UL94 VO rating. Switch internal parts, Connectors, Terminal Block, Coil Former, Relay Base, MCB Casing Field side insulation, PCB Frame & Guide Rail. Suppliers
  • RGR33FR Nylon Suppliers
  • 6 Flame Retardant VO Glass Filled 33% Suppliers
  • MoS2 Filled Suppliers
  • RGMS30 Suppliers
  • Nylon 66 Unfilled Lubricated with MoS2 Excellent abrasion & wear resistance, Good surface finish & dimensional stability, High Elongation & Easy Processability, Dry lubrication for anti-friction & reduced wear. Gears, Bushes, Bearings, Coil former, Coil links, Cam/CAm roller, Sleeves, Acuator Suppliers
  •  
    olypropylene Polymers (PP) Suppliers
     
     
  • olypropylene Polymers (PP) Suppliers
  • Unfilled UV Stabilised Suppliers
  • PGPUV Suppliers
  • PP Unfilled UV Stabilised Unfilled Polypropylene enhanced with suitable UV stabilisers which is suitable for outdoor application. Good processabilithy, retains nominal percentage mechancial properties in actual usage condition. Case Glove Box, Console Inside cover front, Air conditioner end cap Suppliers
  • Glass Filled Suppliers
  • PGR10 Suppliers
  • PP Glass Filled 10% Excellent dimensional stability and stiffness, Chemically coupled glass reinforced and heat stabilised material offer excellent mechancial and thermal properties with reduced mould shrinkage. Easy Processability. Thin wall applications, Automotive Application, Helmet Box, Mirror Housing, Appliances. Suppliers
  • PGR20 Suppliers
  • PP Glass Filled 10% Suppliers
  • PGR30 Suppliers
  • PP Glass Filled 30% Suppliers
  • Talc Filled PTR20 Suppliers
  • PP Talc Filled 20% Good surface finish, Moderate mechancial and thermal properties, Good stiffness Chemically coupled glass reinforced and heat stabilised material offer excellent mechancial and thermal properties with reduced mould shrinkage. Easy Processability Thin wall applications, Automotive Application, Helmet Box, Mirror Housing, Appliances. Suppliers
  • PP Talc Filled 30% Suppliers
  • Nylon 6 UV Stabilised Glass Filled 33% Suppliers
  •  
    m PPO Polymers Suppliers
     
  • m PPO Polymers Suppliers
  • unfilled Suppliers
  • NGP Suppliers
  • PPO Unfilled General Purpose Excellent Dimensional stability, Low moisture absorption, High mechanical and dielectrical strength, Ourstanding Electrical Properties Automotive Interior & Exterior parts, Electrical appliances, Housing, Impellors for pumps Suppliers
  • NGR20 Suppliers
  • PP Glass Filled 20% Suppliers
  • NGR30 Suppliers
  • PP Glass Filled 30% Suppliers
  • Glass Filled Suppliers
  • NGR20 Suppliers
  • PPO Glass Filled 20% Excellent Dimensional stability, Low mositure absorption, Excellent Strength and Stiffness Impellers for pumps, Water filters, Water mixing valves, Central heating parts,Water meter components and Water filters Suppliers
  •  
    ABS Polymers Suppliers
     
  • ABS Polymers Suppliers
  • Glass Filled Suppliers
  • AGR 15 Suppliers
  • ABS Glass Filled 15% Suppliers
  • AGR 30 PPO Glass Filled 30% Suppliers
  • Reduced shrinkage, Good mechanical and thermal properties, Good Surface Finish, Special property enhancement for resistant to wear Textile pulleys, and machine parts, Airconditioner fans, Impellers, Brackets, Motor casing, Meter housing Suppliers
  •  
    Polyacetal Polymers(POM) Suppliers
     
  • Polyacetal Polymers(POM) Suppliers
  • Unfilled Suppliers
  • FGP9 Black Suppliers
  • FGP27 Black POM Unfilled Co-Polymer Excellent balance of stiffness and toughness, Good Electrical and mechanical properties, Good chemical resistance, Two varies MFI levels available to suit different component geometry and application. Because of their excellent thermal and mechanical properties a POM compounds find extensive use in the Automotive, appliance, and electronic industries. Suppliers
  • Synthetic polymers are human-made polymers derived from petroleum oil. From the utility point of view they can be classified into three main categories: thermoplastics, elastomers and synthetic fibers. They are found commonly in a variety of consumer products such as honey, glue, etc. Suppliers
  •  
    Styrene Acrylonitrile Polymers(SAN) Suppliers
     
  • Styrene Acrylonitrile Polymers(SAN) Suppliers
  • Glass Filled Suppliers
  • SANGR20 Suppliers
  • SAN Glass Filled 20% Suppliers
  • Excellent dimensional stability, Good impact strength, (for impact modified grades), High creep resistance and chemical resistance Battery Cases, Window Panel, Speedometer Cover, Instrumental Panels, Terminal Box, instrument lenses, appliances knobs Suppliers
  •  
    List of Polymer Suppliers
     
  • Low-density polyethylene LDPE Chemically inert, flexible, insulator Suppliers
  • Squeeze bottles, toys, flexible pipes, insulation cover (electric wires), six pack rings, etc. Suppliers
  •  
  • High-density polyethylene HDPE Inert, thermally stable,tough and high tensile strength Suppliers
  • Bottles, pipes,inner insulation (dielectric) of coax cable (see also PTFE), plastic bags, etc. Suppliers
  •  
  • Polypropylene PP Resistant to acids and alkalies,High tensile strength Suppliers
  • Auto parts, industrial fibers, food containers, liner in bags, dishware and as a wrapping material for textiles and food Suppliers
  •  
  • Polystyrene (thermocole) PS Thermal insulator. Properties depends on the form, expanded form is tough and rigid Suppliers
  • Petri dishes, CD case, plastic cutlery Suppliers
  •  
  • Polytetrafluoroethylene PTFE Very low coefficient of friction, excellent dielectric properties, chemically inert Suppliers
  • Low friction bearings, non-stick pans, inner insulation (dielectric) of coax cable (see also HDPE), coating against chemical attack etc. Suppliers
  •  
  • Polyvinyl chloride PVC Insulator, flame retardant, chemically inert Suppliers
  • Pipe ( mainly draining), fencing, lawn chairs, hand-bags, curtain clothes, non-food bottles, raincoats, toys, vinyl flooring, electrical installation insulations, etc. Suppliers
  •  
    Bakelite Suppliers
     
  • Bakelite Suppliers
  • Phenol-formaldehyde resin Suppliers
  • High electric, heat and chemical resistance Suppliers
  • Insulation of wires, manufacturing sockets, electrical devices, brake pads, etc. Suppliers
  •  
    Kevlar Suppliers
     
  • Kevlar Suppliers
  • Para-aramid fibre Suppliers
  • High tensile strength Suppliers
  • Manufacturing armour, sports and musical equipment. Used in the field of cryogenics Suppliers
  •  
    Twaron Polymer Suppliers
     
  • Twaron Suppliers
  • Para-aramid Heat resistant and strong fibre Suppliers
  • Bullet-proof body armor, helmets, brake pads, ropes, cables and optical fibre cables, etc. and as an asbestos substitute Suppliers
  •  
    Mylar Suppliers
     
  • Mylar Suppliers
  • Polyethylene terephthalate film Suppliers
  • High strength and stiffness, less permeable to gases, almost reflects light completely Suppliers
  • Food packaging, transparent covering over paper, reflector for rollsigns and solar cooking stoves Suppliers
  •  
    Neoprene Suppliers
     
  • Neoprene Suppliers
  • Polychloroprene Suppliers
  • Chemically inert Suppliers
  • Manufacturing gaskets, corrosion resistant coatings, waterproof seat covers, substitute for corks and latex Suppliers
  •  
    Nylon Suppliers
     
  • Nylon Suppliers
  • Polyamide Suppliers
  • Silky, thermoplastic and resistant to biological and chemical agents Suppliers
  • Stockings, fabrics, toothbrushes. Molded nylon is used in making machine screws, gears etc. Suppliers
  •  
    Nomex Suppliers
     
  • Nomex Suppliers
  • Meta-aramid polymer Suppliers
  • Excellent thermal, chemical, and radiation resistance, rigid, durable and fireproof. Suppliers
  • Hood of firefighter's mask, electrical lamination of circuit boards and transformer cores and in Thermal Micrometeoroid Garment Suppliers
  •  
    Orlon Suppliers
     
  • Orlon Suppliers
  • Polyacrylonitrile (PAN) Suppliers
  • Wool-like, resistant to chemicals, oils, moths and sunlight Suppliers
  • Used for making clothes and fabrics like sweaters, hats, yarns, rugs, etc., and as a precursor of carbon fibres Suppliers
  •  
    Rilsan Suppliers
     
  • Rilsan Suppliers
  • Polyamide 11 & 12 Suppliers
  • Bioplastic Suppliers
  • Used in high-performance applications such as sports shoes, electronic device components, automotive fuel lines, pneumatic airbrake tubing, oil and gas flexible pipes and control fluid umbilicals, and catheters. Suppliers
  •  
    Technora Suppliers
     
  • Technora Suppliers
  • Copolyamid Suppliers
  • High tensile strength, resistance to corrosion, heat, chemicals and saltwater Suppliers
  • Used for manufacturing optical fiber cables, umbilical cables, drumheads, automotive industry, ropes, wire ropes and cables Suppliers
  •  
    Teflon Suppliers
     
  • Teflon Suppliers
  • Polytetrafluoroethylene (PTFE) Suppliers
  • Very low coefficient of friction, excellent dielectric properties, high melting, chemically inert Suppliers
  • Plain bearings, gears, non-stick pans, etc. due to its low friction. Used as a tubing for highly corrosive chemicals. Suppliers
  •  
    Ultem Suppliers
     
  • Ultem Suppliers
  • Polyimide Suppliers
  • Heat,flame and solvent resistant. Has high dielectric strength Suppliers
  • Used in medical and chemical instrumentation, also in guitar picks Suppliers
  •  
    Vectran Suppliers
     
  • Vectran Suppliers
  • aromatic polyester Suppliers
  • High thermal and chemical stability. Golden color. Has high strength, low creep, and is moisture resistant Suppliers
  • Used as reinforcing fibres for ropes, cables, sailcloth. Also used in manufacturing badminton strings, bike tires and in electronics applications. Is the key component of a line of inflatable spacecraft developed by Bigelow Aerospace Suppliers
  •  
    Viton Suppliers
     
  • Viton Suppliers
  • Polytetrafluoroethylene (PTFE) Suppliers
  • Elastomer Suppliers
  • Depends on the grade of the polymer. Viton B is used in chemical process plants and gaskets. Suppliers
  •  
    Zylon Suppliers
     
  • Zylon Suppliers
  • poly-p-phenylene-2,6-benzobisoxazole (PBO) Suppliers
  • Very high tensile strength and thermal stability Suppliers
  • Used in tennis racquets, table tennis blades, body armor, etc. Suppliers
  •  
    Addition polymer Suppliers
     
  • Addition polymer Suppliers
  • Condensation polymer Suppliers
  • Cross-link Suppliers
  • In situ polymerization Suppliers
  • Metallocene Suppliers
  • Plasma polymerization Suppliers
  • Polymer characterization Suppliers
  • Polymer physics Suppliers
  • Reversible addition−fragmentation chain transfer polymerization Suppliers
  • Ring-opening polymerization Suppliers
  • Sequence-controlled polymers Suppliers
  • Sol-gel Suppliers
  • Ziegler–Natta catalyst Suppliers
  •  
    Nylon Suppliers
     
     
    Low-density polyethylene (LDPE) Suppliers in chennai , High-density polyethylene (HDPE) Suppliers in chennai , Polypropylene (PP) Suppliers in chennai , Polyvinyl chloride (PVC) Suppliers in chennai , Polystyrene (PS) Suppliers in chennai , Nylon, nylon 6, nylon 6,6 Suppliers in chennai , Teflon (Polytetrafluoroethylene) Suppliers in chennai , Thermoplastic polyurethanes (TPU) Suppliers in chennai ...
     
    NYLON 6 Polymers Suppliers
     
    NYLON 6 Polymers Suppliers in chennai , Unfilled Suppliers in chennai , SGP Suppliers in chennai , Nylon 6 Unfilled General Purpose High Strength, toughness & light weight, Excellent ductility, abrasion resistance, Good electrical insulation, easily machined and mould release. Toughened grades will exhibit higher mechanical strength. Gears, Bushings & Bearings, Plugs & Sockets, Switch parts, Pulleys, Wear Plates, Terminals & Connectors. Suppliers in chennai , SGPC Suppliers in chennai , Nylon 6 Unfilled General Purpose Colours Suppliers in chennai , Glass Filled Suppliers in chennai , SGR10 Suppliers in chennai , Nylon 6 Glass Reinforced 10% Suppliers in chennai , High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mould release Good dimensional stability and reduced shrinkage. Swich Parts, Connectors, Sockets, Gears, Bearings, Bushes, Knobs / Cams, Terminals, Fuse Box, Motor Insulation Parts. Suppliers in chennai , SGR15 Suppliers in chennai , Nylon 6 Glass Reinforced 15% Suppliers in chennai , SGR30 Suppliers in chennai , Nylon 6 Glass Reinforced 30% Suppliers in chennai ...
     
    SMR15 Nylon 6 Mineral Suppliers
     
    SMR15 Nylon 6 Mineral 15% Good mechancial & thermal properties Excellent surface finish and gloss, Warpage free moulding, High heat resistance, Good dimensional stability, suitable for online Painting. Automotive Parts, Wheel cover, Instrument housing, Lamp Housing, Cooker Handle, Heater Grill, Throttle, Engine Wood, Flask Lid, Fuel Pumps, Brackets. Suppliers in chennai , SMR30 Nylon 6 Mineral 30% Suppliers in chennai , UV Stabilised Suppliers in chennai , SGRUV15 Nylon 6 UV Stabilised Glass Filled 15% Good Rigidity, High Toughness, Good Dimensionability, High HDT under load. Good retention of mechanical properties after long term exposure to sunlight or UV radiation. Userful in Exterior automobile applications which are exposed to sunlight and Sports equipments. Suppliers in chennai , SGRUV30 Nylon 6 UV Stabilised Glass Filled 15% Suppliers in chennai , Flame Retardant SGR15FR Nylon 6 Flame Retardant VO Glass Filled 15% Good mechancial & thermal properties, Warpage free mouldings, dimensional stability, Resistance to creep and fatigue Resistance to arc-tracking. Meets UL94 VO rating. Switch internal parts, Connectors, Terminal Block, Coil Former, Relay Base, MCB Casing Field side insulation, PCB Frame & Guide Rail. Suppliers in chennai , SGR30FR Nylon 6 Flame Retardant VO Glass Filled 30% Suppliers in chennai , Super Tough Alloys Suppliers in chennai , SMT35 Nylon 6 Super Tough Alloy High elogation, High impact strength, Excellent flexibility.Cable tie, Automobile fuel lines, Wring harness, Sprocket housing. Suppliers in chennai , MoS2 Filled SGMS28 Nylon 6 Unfilled Lubricated with MoS2 Excellent abrasion & wear resistance, Good surface finish & dimensional stability, High Elongation & Easy Processability, Dry lubrication for anti-friction & reduced wear. Gears, Bushes, Bearings, Coil former, Coil links, Cam/CAm roller, Sleeves, Acuators/t Suppliers in chennai ...
     
    NYLON 66 Polymers Suppliers
     
     
    NYLON 66 Polymers Suppliers in chennai , Unfilled Suppliers in chennai , RGP Suppliers in chennai , Nylon 66 Unfilled General Purpose High Strength, toughness & light weight, Excellent ductility, abrasion resistance, Good electrical insulation, easily machined and mould release. Toughened grades will exhibit higher mechanical strength. Gears, Bushings & Bearings, Plugs & Sockets, Switch parts, Pulleys, Wear Plates, Terminals & Connectors. Suppliers in chennai , RGPC Suppliers in chennai , Nylon 6 Unfilled General Purpose Colours Suppliers in chennai , Glass Filled Suppliers in chennai , RGR20 Suppliers in chennai , Nylon 66 Glass Reinforced 20% High mechancial and thermal properties. Good weathering and Chemical resistance. Easy Processability and Mould release Good dimensional stability and reduced shrinkage. Swich Parts, Connectors, Sockets, Gears, Bearings, Bushes, Knobs / Cams, Terminals, Fuse Box, Motor Insulation Parts. Suppliers in chennai , RGR33 Suppliers in chennai , Nylon 6 Glass Reinforced 33% Suppliers in chennai , UV Stabilised Suppliers in chennai , RGRUV20 Suppliers in chennai , Nylon 66 Suppliers in chennai , UV Stabilised Glass Filled 20% Good Rigidity, High Toughness, Good Dimensionability, High HDT under load. Good retention of mechanical properties after long term exposure to sunlight or UV radiation. Userful in Exterior automobile applications which are exposed to sunlight and Sports equipments. Suppliers in chennai , RGRUV33 Nylon Suppliers in chennai , 6 UV Stabilised Glass Filled 33% Suppliers in chennai , Flame Retardant Suppliers in chennai , RGR20FR Nylon Suppliers in chennai , 66 Flame Retardant VO Glass Filled 20% Good mechancial & thermal properties, Warpage free mouldings, dimensional stability, Resistance to creep and fatigue Resistance to arc-tracking. Meets UL94 VO rating. Switch internal parts, Connectors, Terminal Block, Coil Former, Relay Base, MCB Casing Field side insulation, PCB Frame & Guide Rail. Suppliers in chennai , RGR33FR Nylon Suppliers in chennai , 6 Flame Retardant VO Glass Filled 33% Suppliers in chennai , MoS2 Filled Suppliers in chennai , RGMS30 Suppliers in chennai , Nylon 66 Unfilled Lubricated with MoS2 Excellent abrasion & wear resistance, Good surface finish & dimensional stability, High Elongation & Easy Processability, Dry lubrication for anti-friction & reduced wear. Gears, Bushes, Bearings, Coil former, Coil links, Cam/CAm roller, Sleeves, Acuator Suppliers in chennai ...
     
    olypropylene Polymers (PP) Suppliers
     
     
    olypropylene Polymers (PP) Suppliers in chennai , Unfilled UV Stabilised Suppliers in chennai , PGPUV Suppliers in chennai , PP Unfilled UV Stabilised Unfilled Polypropylene enhanced with suitable UV stabilisers which is suitable for outdoor application. Good processabilithy, retains nominal percentage mechancial properties in actual usage condition. Case Glove Box, Console Inside cover front, Air conditioner end cap Suppliers in chennai , Glass Filled Suppliers in chennai , PGR10 Suppliers in chennai , PP Glass Filled 10% Excellent dimensional stability and stiffness, Chemically coupled glass reinforced and heat stabilised material offer excellent mechancial and thermal properties with reduced mould shrinkage. Easy Processability. Thin wall applications, Automotive Application, Helmet Box, Mirror Housing, Appliances. Suppliers in chennai , PGR20 Suppliers in chennai , PP Glass Filled 10% Suppliers in chennai , PGR30 Suppliers in chennai , PP Glass Filled 30% Suppliers in chennai , Talc Filled PTR20 Suppliers in chennai , PP Talc Filled 20% Good surface finish, Moderate mechancial and thermal properties, Good stiffness Chemically coupled glass reinforced and heat stabilised material offer excellent mechancial and thermal properties with reduced mould shrinkage. Easy Processability Thin wall applications, Automotive Application, Helmet Box, Mirror Housing, Appliances. Suppliers in chennai , PP Talc Filled 30% Suppliers in chennai , Nylon 6 UV Stabilised Glass Filled 33% Suppliers in chennai ...
     
    m PPO Polymers Suppliers
     
    m PPO Polymers Suppliers in chennai , unfilled Suppliers in chennai , NGP Suppliers in chennai , PPO Unfilled General Purpose Excellent Dimensional stability, Low moisture absorption, High mechanical and dielectrical strength, Ourstanding Electrical Properties Automotive Interior & Exterior parts, Electrical appliances, Housing, Impellors for pumps Suppliers in chennai , NGR20 Suppliers in chennai , PP Glass Filled 20% Suppliers in chennai , NGR30 Suppliers in chennai , PP Glass Filled 30% Suppliers in chennai , Glass Filled Suppliers in chennai , NGR20 Suppliers in chennai , PPO Glass Filled 20% Excellent Dimensional stability, Low mositure absorption, Excellent Strength and Stiffness Impellers for pumps, Water filters, Water mixing valves, Central heating parts,Water meter components and Water filters Suppliers in chennai ...
     
    ABS Polymers Suppliers
     
    ABS Polymers Suppliers in chennai , Glass Filled Suppliers in chennai , AGR 15 Suppliers in chennai , ABS Glass Filled 15% Suppliers in chennai , AGR 30 PPO Glass Filled 30% Suppliers in chennai , Reduced shrinkage, Good mechanical and thermal properties, Good Surface Finish, Special property enhancement for resistant to wear Textile pulleys, and machine parts, Airconditioner fans, Impellers, Brackets, Motor casing, Meter housing Suppliers in chennai ...
     
    Polyacetal Polymers(POM) Suppliers
     
    Polyacetal Polymers(POM) Suppliers in chennai , Unfilled Suppliers in chennai , FGP9 Black Suppliers in chennai , FGP27 Black POM Unfilled Co-Polymer Excellent balance of stiffness and toughness, Good Electrical and mechanical properties, Good chemical resistance, Two varies MFI levels available to suit different component geometry and application. Because of their excellent thermal and mechanical properties a POM compounds find extensive use in the Automotive, appliance, and electronic industries. Suppliers in chennai , Synthetic polymers are human-made polymers derived from petroleum oil. From the utility point of view they can be classified into three main categories: thermoplastics, elastomers and synthetic fibers. They are found commonly in a variety of consumer products such as honey, glue, etc. Suppliers in chennai ...
     
    Styrene Acrylonitrile Polymers(SAN) Suppliers
     
    Styrene Acrylonitrile Polymers(SAN) Suppliers in chennai , Glass Filled Suppliers in chennai , SANGR20 Suppliers in chennai , SAN Glass Filled 20% Suppliers in chennai , Excellent dimensional stability, Good impact strength, (for impact modified grades), High creep resistance and chemical resistance Battery Cases, Window Panel, Speedometer Cover, Instrumental Panels, Terminal Box, instrument lenses, appliances knobs Suppliers in chennai ...
     
    List of Polymer Suppliers
     
    Low-density polyethylene LDPE Chemically inert, flexible, insulator Suppliers in chennai , Squeeze bottles, toys, flexible pipes, insulation cover (electric wires), six pack rings, etc. Suppliers in chennai ,
     
    High-density polyethylene HDPE Inert, thermally stable,tough and high tensile strength Suppliers in chennai , Bottles, pipes,inner insulation (dielectric) of coax cable (see also PTFE), plastic bags, etc. Suppliers in chennai ,
     
    Polypropylene PP Resistant to acids and alkalies,High tensile strength Suppliers in chennai , Auto parts, industrial fibers, food containers, liner in bags, dishware and as a wrapping material for textiles and food Suppliers in chennai ,
     
    Polystyrene (thermocole) PS Thermal insulator. Properties depends on the form, expanded form is tough and rigid Suppliers in chennai , Petri dishes, CD case, plastic cutlery Suppliers in chennai ,
     
    Polytetrafluoroethylene PTFE Very low coefficient of friction, excellent dielectric properties, chemically inert Suppliers in chennai , Low friction bearings, non-stick pans, inner insulation (dielectric) of coax cable (see also HDPE), coating against chemical attack etc. Suppliers in chennai ,
     
    Polyvinyl chloride PVC Insulator, flame retardant, chemically inert Suppliers in chennai , Pipe ( mainly draining), fencing, lawn chairs, hand-bags, curtain clothes, non-food bottles, raincoats, toys, vinyl flooring, electrical installation insulations, etc. Suppliers in chennai ,
     
    Bakelite Suppliers
     
    Bakelite Suppliers in chennai , Phenol-formaldehyde resin Suppliers in chennai , High electric, heat and chemical resistance Suppliers in chennai , Insulation of wires, manufacturing sockets, electrical devices, brake pads, etc. Suppliers in chennai ...
     
    Kevlar Suppliers
     
    Kevlar Suppliers in chennai , Para-aramid fibre Suppliers in chennai , High tensile strength Suppliers in chennai , Manufacturing armour, sports and musical equipment. Used in the field of cryogenics Suppliers in chennai ...
     
    Twaron Polymer Suppliers
     
    Twaron Suppliers in chennai , Para-aramid Heat resistant and strong fibre Suppliers in chennai , Bullet-proof body armor, helmets, brake pads, ropes, cables and optical fibre cables, etc. and as an asbestos substitute Suppliers in chennai ,
     
    Mylar Suppliers
     
    Mylar Suppliers in chennai , Polyethylene terephthalate film Suppliers in chennai , High strength and stiffness, less permeable to gases, almost reflects light completely Suppliers in chennai , Food packaging, transparent covering over paper, reflector for rollsigns and solar cooking stoves Suppliers in chennai ...
     
    Neoprene Suppliers
     
    Neoprene Suppliers in chennai , Polychloroprene Suppliers in chennai , Chemically inert Suppliers in chennai , Manufacturing gaskets, corrosion resistant coatings, waterproof seat covers, substitute for corks and latex Suppliers in chennai ,
     
    Nylon Suppliers
     
    Nylon Suppliers in chennai , Polyamide Suppliers in chennai , Silky, thermoplastic and resistant to biological and chemical agents Suppliers in chennai , Stockings, fabrics, toothbrushes. Molded nylon is used in making machine screws, gears etc. Suppliers in chennai ...
     
    Nomex Suppliers
     
    Nomex Suppliers in chennai , Meta-aramid polymer Suppliers in chennai , Excellent thermal, chemical, and radiation resistance, rigid, durable and fireproof. Suppliers in chennai , Hood of firefighter's mask, electrical lamination of circuit boards and transformer cores and in Thermal Micrometeoroid Garment Suppliers in chennai ,
     
    Orlon Suppliers
     
    Orlon Suppliers in chennai , Polyacrylonitrile (PAN) Suppliers in chennai , Wool-like, resistant to chemicals, oils, moths and sunlight Suppliers in chennai , Used for making clothes and fabrics like sweaters, hats, yarns, rugs, etc., and as a precursor of carbon fibres Suppliers in chennai ,
     
    Rilsan Suppliers
     
    Rilsan Suppliers in chennai , Polyamide 11 & 12 Suppliers in chennai , Bioplastic Suppliers in chennai , Used in high-performance applications such as sports shoes, electronic device components, automotive fuel lines, pneumatic airbrake tubing, oil and gas flexible pipes and control fluid umbilicals, and catheters. Suppliers in chennai ...
     
    Technora Suppliers
     
    Technora Suppliers in chennai , Copolyamid Suppliers in chennai , High tensile strength, resistance to corrosion, heat, chemicals and saltwater Suppliers in chennai , Used for manufacturing optical fiber cables, umbilical cables, drumheads, automotive industry, ropes, wire ropes and cables Suppliers in chennai ,
     
    Teflon Suppliers
     
    Teflon Suppliers in chennai , Polytetrafluoroethylene (PTFE) Suppliers in chennai , Very low coefficient of friction, excellent dielectric properties, high melting, chemically inert Suppliers in chennai , Plain bearings, gears, non-stick pans, etc. due to its low friction. Used as a tubing for highly corrosive chemicals. Suppliers in chennai ,
     
    Ultem Suppliers
     
    Ultem Suppliers in chennai , Polyimide Suppliers in chennai , Heat,flame and solvent resistant. Has high dielectric strength Suppliers in chennai , Used in medical and chemical instrumentation, also in guitar picks Suppliers in chennai ...
     
    Vectran Suppliers
     
    Vectran Suppliers in chennai , aromatic polyester Suppliers in chennai , High thermal and chemical stability. Golden color. Has high strength, low creep, and is moisture resistant Suppliers in chennai , Used as reinforcing fibres for ropes, cables, sailcloth. Also used in manufacturing badminton strings, bike tires and in electronics applications. Is the key component of a line of inflatable spacecraft developed by Bigelow Aerospace Suppliers in chennai ,
     
    Viton Suppliers
     
    Viton Suppliers in chennai , Polytetrafluoroethylene (PTFE) Suppliers in chennai , Elastomer Suppliers in chennai , Depends on the grade of the polymer. Viton B is used in chemical process plants and gaskets. Suppliers in chennai ...
     
    Zylon Suppliers
     
    Zylon Suppliers in chennai , poly-p-phenylene-2,6-benzobisoxazole (PBO) Suppliers in chennai , Very high tensile strength and thermal stability Suppliers in chennai , Used in tennis racquets, table tennis blades, body armor, etc. Suppliers in chennai ...
     
    Addition polymer Suppliers
     
    Addition polymer Suppliers in chennai , Condensation polymer Suppliers in chennai , Cross-link Suppliers in chennai , In situ polymerization Suppliers in chennai , Metallocene Suppliers in chennai , Plasma polymerization Suppliers in chennai , Polymer characterization Suppliers in chennai , Polymer physics Suppliers in chennai , Reversible addition−fragmentation chain transfer polymerization Suppliers in chennai , Ring-opening polymerization Suppliers in chennai , Sequence-controlled polymers Suppliers in chennai , Sol-gel Suppliers in chennai , Ziegler–Natta catalyst Suppliers in chennai ...
     
    Polymer Uses
     
  • 1. Polythene - Packaging, material, carry bags, bottles. Manufacturers and Suppliers
  •  
  • 2. Teflon - Nonstick Kitchen ware Manufacturers and Suppliers
  •  
  • 3. Polypropene - Bottles, Crates Manufacturers and Suppliers
  •  
  • 4. Melamine - Crockery Manufacturers and Suppliers
  •  
  • 5. Polyvinyl chloride (PVC) - Pipes Insulation Manufacturers and Suppliers
  •  
  • 6. Lexan - Bullet proof glass Manufacturers and Suppliers
  •  
  • 7. Vinyl rubber - Rubber erasers Manufacturers and Suppliers
  •  
  • 8. Bakelite - Electrical insulation buttons Manufacturers and Suppliers
  •  
  • 9. Polystyrene - Foam Thermocole Manufacturers and Suppliers
  •  
  • 10. Poly (Styrene butadiene) - Rubber bubble gum Manufacturers and Suppliers
  •  
  • 11. Nylon (Polyester) - Fibres, ropes Manufacturers and Suppliers
  •  
  • 12. Luminous Paints - Glow when exposed to light. They are applied on a surface to protect it from corrosion and weathering. Manufacturers and Suppliers
  •  
  • 13. Antimicrobial polymers (polymeric biocide) - The ability to inhibit the growth of microorganisms Manufacturers and Suppliers
  •  
  • 14. Antigen - Substance capable of stimulating formation of antibodies. Manufacturers and Suppliers
  •  
  • 15. Antipyretie - A substance used to lower body temperature. Manufacturers and Suppliers
  •  
  • 16. Pesticides - Used to kill animals Manufacturers and Suppliers
  •  
  • 17. Para-aramid fibre (Kevlar) Manufacturing armour, sports and musical equipment. Used in the field of cryogenics. Manufacturers and Suppliers
  •  
  • 18. Polyacrylonitrile (PAN) (Orlon) - Used for making clothes and fabrics like sweaters, hats,rugs, etc Manufacturers and Suppliers
  •  
  • 19. Copolyamid (Technora) - Used for manufacturing optical fiber cables, drumheads, automotive industry, ropes, wire ropes and cables. Manufacturers and Suppliers
  •  
  • 20. Polytetrafluoroethylene (PTFE)(Viton) - Viton B is used in chemical process plants and gaskets. As it depends upon the grade of the polymer. Manufacturers and Suppliers
  •  
    polyethylene Suppliers
     
  • Low-density polyethylene (LDPE) Manufacturers and Suppliers
  • High-density polyethylene (HDPE) Manufacturers and Suppliers
  • Polypropylene (PP) Manufacturers and Suppliers
  • Polyvinyl chloride (PVC) Manufacturers and Suppliers
  • Polystyrene (PS) Manufacturers and Suppliers
  • Nylon, nylon 6, nylon 6,6 Manufacturers and Suppliers
  • Teflon (Polytetrafluoroethylene) Manufacturers and Suppliers
  • Thermoplastic polyurethanes (TPU) Manufacturers and Suppliers
  •