AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

PVC Pipe - Polyvinyl chloride Material Testing
 
 
 
 
  • pvc Plastic Composition Testing lab, pvc plastic analysis, pvc plastic products testing lab, pvc Plastic product failure analysis, pvc Plastic identification lab, pvc Plastic testing services, pvc Plastic grade identification lab, pvc Plastic product testing services, pvc Plastic Testing Laboratory
  •  
     
    PVC electrical conduit pipe Testing Lab
     
    PVC electrical conduit pipes Testing (IS:9537 & IS:3419)
     
  • 1 Dimensional Test
  • 2 Compression Test
  • 3 Impact Test
  • 4 Resistance to Heat
  • 5 Resistance to burning
  • 6 Electreical strength
  • 7 Insulation Resistance
  •  
    CPVC Pipe Testing Lab
     
    CPVC Pipe Testing (IS:15778 & ASTM 2846)
     
  • 1 Tensile strength
  • 2 Length
  • 3 Density
  • 4 Flattening Test
  • 5 Wall thickness
  • 6 Reversion
  • 7 Resistance to external blows
  • 8 i)Acceptance Test (20˚C/hr)
  • 9 ii) Type Test (95˚C/165 hr)
  •  
    UPVC Pipe Testing Lab
     
    UPVC Pipe Testing (IS:4985 & ASTM D 1784,ASTM D 1785. ASTM D 2444 & ASTM D 1599)
     
  • 1 Drop Impact Test
  • 2 Flattening Test
  • 3 Hydrostatic Burst Test
  •  
    Physical and Mechanical properties of PVC Plastic Testing Lab
     
  • • Processing temperature range, °C -Injection
  • • Tensile strength at break, psi - D638
  • • Elongation at break, % - D638
  • • Tensile yield strength, psi - D638
  • • Compressive strength (rupture or yield) psi - D695
  • • Flexural strength (rupture or yield) psi - D790
  • • Tensile modulus, 103 psi - D638
  • • Compressive modulus, 103 psi - D695
  • • Flexural modulus, 103 psi (23°C) - D790
  • • Izod Impact, ft·lb/in of notch - D256A
  • • Hardness Shore D - D2240
  • • Deflection temperature °C 264 psi - D648
  • • Specific gravity (g/cm3) - D792
  • • Water Absorption, % (24 hrs.) - D570
  • • Dielectric strength short time, v/mil - D149
  •  
    Physical and Mechanical properties of Plastic Testing Lab
     
  • • Plastic identification testing
  • • Flammability testing
  • • Length of flame testing
  • • Heat cycle resistance testing
  • • Heat aging testing
  • • Chemical resistance testing
  • • Impact resistance testing
  • • Water resistance Odour testing
  • • Fading resistance testing
  • • Weather ability testing
  • • Suction testing
  • • Falling ball testing
  • • Wear resistance testing
  •  
    Types of Plastics Testing Offered:
     
  • • ABS Plastic Testing Lab
  • • Polypropylene Testing
  • • Polyethylene Testing
  • • PVC Testing lab
  • • Nylon 6-6 Testing lab
  • • PTFE Testing Services
  • • PET Testing Services
  • • ABS/PC alloys Plastic Testing Lab
  • • Acetal Plastic Testing Lab
  • • Acrylic Testing Lab
  • • Acrylic-styrene copolymer
  • • Acrylonitrile
  • • Cellulose Acetate
  • • Cellulose Acetate Butanal
  • • Cellulose Acetate Propionate
  • • Chlorinated polyethylene
  • • Epoxy resins
  • • Ethylene vinyl alcohol
  • • Fluoroplastic – PTFE
  • • Fluoroplastic – FEP
  • • Fluoroplastic – PVDF
  • • Ionomer
  • • Polyacrylether ketone
  • • Polyetheether ketone
  • • Liquid Crystal Polymer
  • • Melamine formaldehyde
  • • Phenolics
  • • Nylon 6
  • • Nylon 6/6
  • • Nylon 6/10
  • • Nylon 6/12
  • • Nylon 4/6
  • • Nylon 11
  • • Nylon 12
  • • Aromatic polyamide
  • • Polyamide-Polyimide
  • • Polyethylene and copolymers
  • • Polycarbonate
  • • Polybutylene Terephthalate
  • • Polycyclohexene dimethanol terephthalate
  • • PET: Polyethylene terephthalate
  • • PET/ PC blends
  • • Polyetherimide
  • • Polyethersulfone
  • • Polyimide
  • • Polymethylpentene
  • • Polyphenylene oxide
  • • Polyphenylene sulfide
  • • Polyphthalamide
  • • Polypropylene and copolymers
  • • Polystyrene and copolymers
  • • Polyurethanes
  • • Polyvinylidene chloride
  • • Silicones
  • • Polysulfones
  • • Polyethersulfones
  • • Polyureas
  • • PVC: Polyvinyl chloride
  • • Polyvinylchloride (chlorinated)
  •  
    Types of Plastics Testing Lab
     
  • • Polyarylate plastic testing lab
  • • Polyurethane (PUR) plastic testing lab
  • • Acrylonitrile Ethylene Styrene (AES) plastic testing lab
  • • Polyaryletherketone (PAEK) plastic testing lab
  • • Polyethylene (PE) plastic testing lab
  • • Thermoplastic Elastomer (TPE) plastic testing lab
  • • Polyurethane Thermoset Elastomer (TSU) plastic testing lab
  • • Acrylonitrile Styrene (AS) plastic testing alab
  • • Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
  • • Polybutadiene Rubber (PBR) plastic testing lab
  • • SiliconeAlphamethylstyrene (AMS) plastic testing lab
  • • Polycaprolactone (PCL) plastic testing lab
  • • Styrene Acrylonitrile (SAN) plastic testing lab
  • • Biodegradable Polymers plastic testing lab
  • • Styrene Acrylonitrile Silicone (SAS) plastic testing lab
  • • Cellulose Acetate (CA) plastic testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
  • • Diallyl Phthalate (DAP) plastic testing lab
  • • Polyether Imide (PEI) plastic testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
  • • Dicyclopentadiene (DCPD) plastic testing lab
  • • Epoxy plastic testing and analysis lab
  • • Polyethylene Naphthalate (PEN) plastic testing lab
  • • Thermoplastic Polyurethane (TPU) plastic testing lab
  • • Fluoropolymer plastic testing lab
  • • Polyimide (PI) plastic testing lab
  • • FuranPolylactic Acid (PLA) plastic testing lab
  • • Thermoset (TS) plastic testing lab
  • • Ionomer plastic testing lab
  • • Polymethylpentene (PMP) plastic testing lab
  • • Thermoset Elastomer (TSE) plastic testing lab
  • • Polyphenylene Ether (PPE) plastic testing lab
  • • Vinyl Alcohol (VOH) plastic testing lab
  • • Methyl Cellulose (MC) plastic testing lab
  • • Polyphenylene Sulfide (PPS) plastic testing lab
  • • Methyl Methacrylate (MM) plastic testing lab
  •  
    POLYMER PRODUCTS TESTING LAB
     
  • • Polyarylate polymer testing lab
  • • Polyurethane (PUR) polymer testing lab
  • • Acrylonitrile Ethylene Styrene (AES) polymer testing lab
  • • Polyaryletherketone (PAEK) polymer testing lab
  • • Polyethylene (PE) polymer testing lab
  • • Thermopolymer Elastomer (TPE) polymer testing lab
  • • Polyurethane Thermoset Elastomer (TSU) polymer testing lab
  • • Acrylonitrile Styrene (AS) polymer testing lab
  • • Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
  • • Polybutadiene Rubber (PBR) polymer testing lab
  • • SiliconeAlphamethylstyrene (AMS) polymer testing lab
  • • Polycaprolactone (PCL) polymer testing lab
  • • Styrene Acrylonitrile (SAN) polymer testing lab
  • • Biodegradable Polymers polymer testing lab
  • • Styrene Acrylonitrile Silicone (SAS) polymer testing lab
  • • Cellulose Acetate (CA) polymer testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
  • • Diallyl Phthalate (DAP) polymer testing lab
  • • Polyether Imide (PEI) polymer testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
  • • Dicyclopentadiene (DCPD) polymer testing lab
  • • Epoxy polymer testing lab
  • • Polyethylene Naphthalate (PEN) polymer testing lab
  • • Thermopolymer Polyurethane (TPU) polymer testing lab
  • • Fluoropolymer polymer testing lab
  • • Polyimide (PI) polymer testing lab
  • • FuranPolylactic Acid (PLA) polymer testing lab
  • • Thermoset (TS) polymer testing lab
  • • Ionomer polymer testing lab
  • • Polymethylpentene (PMP) polymer testing lab
  • • Thermoset Elastomer (TSE) polymer testing lab
  • • Polyphenylene Ether (PPE) polymer testing lab
  • • Vinyl Alcohol (VOH) polymer testing lab
  • • Methyl Cellulose (MC) polymer testing lab
  • • Polyphenylene Sulfide (PPS) polymer testing lab
  • • Methyl Methacrylate (MM) polymer testing lab
  • • Polymer product testing lab
  • • Polymer failure analysis lab
  • • Polymer reverse engineering lab
  • • Polymer analytical testing lab
  • • Mechanical testing of polymer lab
  • • polymers product testing lab
  • • Tensile testing of polymer lab
  • • Compression testing lab
  • • Bend testing O polymer lab
  • • Chemical analysis of polymer lab
  • • Physical testing of polymer lab
  • • FTIR analysis of polymer lab
  • • Polymer testing laboratory services
  • • Thermal analysis of polymer lab
  • • DSC Analysis of polymer lab
  • • Failure analysis of polymer lab
  • • Flexural testing lab
  • • Shear testing lab
  • • Intrinsic viscosity of polymers lab
  • • Inherent viscosity of polymers lab
  • • Relative viscosity of polymers lab
  • • Failure Analysis of lab
  • • Polymer testing lab
  •  
    RUBBER PRODUCTS TESTING LAB
     
  • • Rubber gaskets testing lab
  • • Rubber pads testing lab
  • • Rubber O- Rings testing lab
  • • Rubber granules testing lab
  • • Rubber sponges testing lab
  • • Rubber corks testing lab
  • • Rubber tires testing lab
  • • Rubber seals testing lab
  • • Rubber mats testing lab
  • • Rubber automotive parts testing lab
  • • Rubber aerospace parts testing lab
  • • Other Rubber products testing lab
  • • Rubber shoes testing lab
  • • Rubber soles testing lab
  • • Rubber gloves testing lab
  • • Rubber bellows testing lab
  • • Allied rubber products testing lab
  • • Testing and analysis of crumb rubber
  • • Rubber degradation studies
  • • Rubber compound analysis
  • • Rubber product reverse engineering
  • • Rubber material identification
  •  
    Types of Rubber Tested
     
  • • Natural rubber (NR)
  • • Synthetic Polyisporene (IR)
  • • Butyl rubber
  • • Chlorobutyl rubber (CR)
  • • Bromo butyl rubber
  • • Polybutadiene
  • • Styrene-butadiene rubber (SBR)
  • • Nitrile butadiene rubber (NBR)
  • • Hydrogenated nitrile-butadiene rubber
  • • Carboxylated nitrile butadiene rubber
  • • Chloroprene rubber
  • • Ethylene propylene rubber (EPM)
  • • Ethylene propylene diene rubber (EPDM)
  • • Epichlorohydrin rubber
  • • Polyacrylic rubber
  • • Silicone rubber
  • • Fluorosilicones
  • • Fluorphosphazene
  • • Fluorinated elastomer - Viton
  • • Fluorinated elastomer - Aflas
  • • Fluorinated elastomer - Kalrez
  • • Polysulfides
  • • Polyether block amides
  • • Chlorosulfonated polyethylene (Hypalon)
  • • Ethylene vinyl acetate (EVA)
  •  
    Thermoplastic Elastomers Tested
     
  • • Polyolefin
  • • Copolyester-ether
  • • Polyester
  • • Styrene-Butadiene block copolymers
  • • Sytrene-Ethylene block copolymers
  • • Polyester polyurethane
  • • Polyether polyurethane
  •  
    RUBBER, PLASTIC, Sponge , Vinyl FOAM , Flexible Material Testing
     
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM 1149)
  • Cracking Outdoors (ASTM d1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Izod Impact Strength (ASTM D256)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  •  
    Types of Material Testing Lab
     
    pvc material testing lab in laos , pvc pipe testing lab in laos , rubber testing lab in laos , polymer testing lab in laos , latex testing lab in laos , plastic testing lab in laos , abs plastic testing lab in laos , packaging material testing lab in laos , food packaging material testing lab in laos , civil material testing lab in laos , construction material testing lab in laos , spring testing lab in laos , wood testing lab in laos , paint testing lab in laos , bricks testing lab in laos , resin testing lab in laos , thermoplastic testing lab in laos , foam testing lab in laos , sponge testing lab in laos , heavy metal testing in laos , coal testing lab in laos , coal coke testing in laos , thermal coal testing in laos , metallurgical coke testing in laos , petrolium coke testing in laos , fertilizer testing in laos , cement testing lab in laos , fly ash testing in laos , aggregates testing lab in laos , rock testing lab in laos , textile testing lab in laos , fabric and garment testing lab in laos , fabric testing lab in laos , asphalt testing lab in laos , uts utm testing in laos , triaxial rock testing in laos ...
     
    Types of Plastics Testing Lab
     
    Polyarylate plastic testing lab in laos , Polyurethane (PUR) plastic testing lab in laos , Acrylonitrile Ethylene Styrene (AES) plastic testing lab in laos , Polyaryletherketone (PAEK) plastic testing lab in laos , Polyethylene (PE) plastic testing lab in laos , Thermoplastic Elastomer (TPE) plastic testing lab in laos , Polyurethane Thermoset Elastomer (TSU) plastic testing lab in laos , Acrylonitrile Styrene (AS) plastic testing alab in laos , Acrylonitrile Styrene Acrylate (ASA) plastic testing lab in laos , Polybutadiene Rubber (PBR) plastic testing lab in laos , SiliconeAlphamethylstyrene (AMS) plastic testing lab in laos , Polycaprolactone (PCL) plastic testing lab in laos , Styrene Acrylonitrile (SAN) plastic testing lab in laos , Biodegradable Polymers plastic testing lab in laos , Styrene Acrylonitrile Silicone (SAS) plastic testing lab in laos , Cellulose Acetate (CA) plastic testing lab in laos , PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab in laos , Diallyl Phthalate (DAP) plastic testing lab in laos , Polyether Imide (PEI) plastic testing lab in laos , Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab in laos , Dicyclopentadiene (DCPD) plastic testing lab in laos , Epoxy plastic testing and analysis lab in laos , Polyethylene Naphthalate (PEN) plastic testing lab in laos , Thermoplastic Polyurethane (TPU) plastic testing lab in laos , Fluoropolymer plastic testing lab in laos , Polyimide (PI) plastic testing lab in laos , FuranPolylactic Acid (PLA) plastic testing lab in laos , Thermoset (TS) plastic testing lab in laos , Ionomer plastic testing lab in laos , Polymethylpentene (PMP) plastic testing lab in laos , Thermoset Elastomer (TSE) plastic testing lab in laos , Polyphenylene Ether (PPE) plastic testing lab in laos , Vinyl Alcohol (VOH) plastic testing lab in laos , Methyl Cellulose (MC) plastic testing lab in laos , Polyphenylene Sulfide (PPS) plastic testing lab in laos , Methyl Methacrylate (MM) plastic testing lab in laos ...
     
    POLYMER PRODUCTS TESTING LAB
     
    Polyarylate polymer testing lab in laos , Polyurethane (PUR) polymer testing lab in laos , Acrylonitrile Ethylene Styrene (AES) polymer testing lab in laos , Polyaryletherketone (PAEK) polymer testing lab in laos , Polyethylene (PE) polymer testing lab in laos , Thermopolymer Elastomer (TPE) polymer testing lab in laos , Polyurethane Thermoset Elastomer (TSU) polymer testing lab in laos , Acrylonitrile Styrene (AS) polymer testing lab in laos , Acrylonitrile Styrene Acrylate (ASA) polymer testing lab in laos , Polybutadiene Rubber (PBR) polymer testing lab in laos , SiliconeAlphamethylstyrene (AMS) polymer testing lab in laos , Polycaprolactone (PCL) polymer testing lab in laos , Styrene Acrylonitrile (SAN) polymer testing lab in laos , Biodegradable Polymers polymer testing lab in laos , Styrene Acrylonitrile Silicone (SAS) polymer testing lab in laos , Cellulose Acetate (CA) polymer testing lab in laos , PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab in laos , Diallyl Phthalate (DAP) polymer testing lab in laos , Polyether Imide (PEI) polymer testing lab in laos , Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab in laos , Dicyclopentadiene (DCPD) polymer testing lab in laos , Epoxy polymer testing lab in laos , Polyethylene Naphthalate (PEN) polymer testing lab in laos , Thermopolymer Polyurethane (TPU) polymer testing lab in laos , Fluoropolymer polymer testing lab in laos , Polyimide (PI) polymer testing lab in laos , FuranPolylactic Acid (PLA) polymer testing lab in laos , Thermoset (TS) polymer testing lab in laos , Ionomer polymer testing lab in laos , Polymethylpentene (PMP) polymer testing lab in laos , Thermoset Elastomer (TSE) polymer testing lab in laos , Polyphenylene Ether (PPE) polymer testing lab in laos , Vinyl Alcohol (VOH) polymer testing lab in laos , Methyl Cellulose (MC) polymer testing lab in laos , Polyphenylene Sulfide (PPS) polymer testing lab in laos , Methyl Methacrylate (MM) polymer testing lab in laos , Polymer product testing lab in laos , Polymer failure analysis lab in laos , Polymer reverse engineering lab in laos , Polymer analytical testing lab in laos , Mechanical testing of polymer lab in laos , polymers product testing lab in laos , Tensile testing of polymer lab in laos , Compression testing lab in laos , Bend testing O polymer lab in laos , Chemical analysis of polymer lab in laos , Physical testing of polymer lab in laos , FTIR analysis of polymer lab in laos , Polymer testing laboratory services Thermal analysis of polymer lab in laos , DSC Analysis of polymer lab in laos , Failure analysis of polymer lab in laos , Flexural testing lab in laos , Shear testing lab in laos , Intrinsic viscosity of polymers lab in laos , Inherent viscosity of polymers lab in laos , Relative viscosity of polymers lab in laos , Failure Analysis of lab in laos , Polymer testing lab in laos ...
     
    RUBBER PRODUCTS TESTING LAB
     
    Rubber gaskets testing lab in laos , Rubber pads testing lab in laos , Rubber O- Rings testing lab in laos , Rubber granules testing lab in laos , Rubber sponges testing lab in laos , Rubber corks testing lab in laos , Rubber tires testing lab in laos , Rubber seals testing lab in laos , Rubber mats testing lab in laos , Rubber automotive parts testing lab in laos , Rubber aerospace parts testing lab in laos , Other Rubber products testing lab in laos , Rubber shoes testing lab in laos , Rubber soles testing lab in laos , Rubber gloves testing lab in laos , Rubber bellows testing lab in laos , Allied rubber products testing lab in laos , Testing and analysis of crumb rubber in laos , Rubber degradation studies in laos , Rubber compound analysis in laos , Rubber product reverse engineering in laos , Rubber material identification in laos ...
     
    Types of Rubber Testing Lab
     
    Natural rubber (NR) in laos , Synthetic Polyisporene (IR) in laos , Butyl rubber in laos , Chlorobutyl rubber (CR) in laos , Bromo butyl rubber in laos , Polybutadiene in laos , Styrene-butadiene rubber (SBR) in laos , Nitrile butadiene rubber (NBR) in laos , Hydrogenated nitrile-butadiene rubber in laos , Carboxylated nitrile butadiene rubber in laos , Chloroprene rubber in laos , Ethylene propylene rubber (EPM) in laos , Ethylene propylene diene rubber (EPDM) in laos , Epichlorohydrin rubber in laos , Polyacrylic rubber in laos , Silicone rubber in laos , Fluorosilicones in laos , Fluorphosphazene in laos , Fluorinated elastomer - Viton in laos , Fluorinated elastomer - Aflas in laos , Fluorinated elastomer - Kalrez in laos , Polysulfides in laos , Polyether block amides in laos , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in laos ...
     
    list of our services following cities
     
    Afghanistan | Africa | Albania | Algeria | Americas | Andorra | Angola | Anguilla | Antigua and Barbuda | Argentina | Armenia | Aruba | Asia | Australia | Australia and New Zealand | Austria | Azerbaijan | Bahamas | Bahrain | Bangladesh | Barbados | Belarus | Belgium | Belize | Benin | Bermuda | Bhutan | Bolivia (Plurinational State of) | Bosnia and Herzegovina | Botswana | Brazil | British Virgin Islands | Brunei Darussalam | Bulgaria | Burkina Faso | Burundi | Cabo Verde | Cambodia | Cameroon | Canada | Caribbean | Cayman Islands | Central African Republic | Central America | Central Asia | Chad | Chile | China, Hong Kong SAR | China, Macao Special Administrative Region | China, People's Republic of | Colombia | Comoros | Congo | Cook Islands | Costa Rica | Côte d'Ivoire | Croatia | Cuba | Curaçao | Cyprus | Czechia | Democratic People's Republic of Korea | Democratic Republic of the Congo | Denmark | Djibouti | Dominica | Dominican Republic | Eastern Africa | Eastern Asia | Eastern Europe | Ecuador | Egypt | El Salvador | Equatorial Guinea | Eritrea | Estonia | Ethiopia | Europe | Fiji | Finland | Former Czechoslovakia | Former Ethiopia | Former Netherlands Antilles | Former Sudan | Former USSR | Former Yugoslavia | France | French Polynesia | Gabon | Gambia | Georgia | Germany | Ghana | Greece | Greenland | Grenada | Guatemala | Guinea | Guinea-Bissau | Guyana | Haiti | Honduras | Hungary | Iceland | India | Indonesia | Iran, Islamic Republic of | Iraq | Ireland | Israel | Italy | Jamaica | Japan | Jordan | Kazakhstan | Kenya | Kingdom of Eswatini | Kiribati | Kosovo | Kuwait | Kyrgyzstan | Lao People's Democratic Republic | Latin America and the Caribbean | Latvia | Lebanon | Lesotho | Liberia | Libya | Liechtenstein | Lithuania | Luxembourg | Madagascar | Malawi | Malaysia | Maldives | Mali | Malta | Marshall Islands | Mauritania | Mauritius | Melanesia | Mexico | Micronesia | Micronesia (Federated States of) | Middle Africa | Monaco | Mongolia | Montenegro | Montserrat | Morocco | Mozambique | Myanmar | Namibia | Nauru | Nepal | Netherlands | New Caledonia | New Zealand | Nicaragua | Niger | Nigeria | Northern Africa | Northern America | Northern Europe | Norway | Oceania | Oman | Pakistan | Palau | Panama | Papua New Guinea | Paraguay | Peru | Philippines | Poland | Polynesia | Portugal | Puerto Rico | Qatar | Republic of Korea | Republic of Moldova | Republic of North Macedonia | Romania | Russian Federation | Rwanda | Saint Kitts and Nevis | Saint Lucia | Saint Vincent and the Grenadines | Samoa | San Marino | Sao Tome and Principe | Saudi Arabia | Senegal | Serbia | Seychelles | Sierra Leone | Singapore | Sint Maarten (Dutch part) | Slovakia | Slovenia | Solomon Islands | Somalia | South Africa | South America | South Sudan | South-Eastern Asia | Southern Africa | Southern Asia | Southern Europe | Spain | Sri Lanka | State of Palestine | Sub-Saharan Africa | Sudan | Suriname | Sweden | Switzerland | Syrian Arab Republic | Tajikistan | Thailand | Timor-Leste | Togo | Tonga | Trinidad and Tobago | Tunisia | Turkey | Turkmenistan | Turks and Caicos Islands | Tuvalu | Uganda | Ukraine | United Arab Emirates | United Kingdom of Great Britain and Northern Ireland | United Republic of Tanzania: Mainland | United Republic of Tanzania: Zanzibar | United States | Uruguay | Uzbekistan | Vanuatu | Venezuela (Bolivarian Republic of) | Viet Nam | Western Africa | Western Asia | Western Europe | World | Yemen | Yemen: Former Democratic Yemen | Yemen: Former Yemen Arab Republic | Zambia | Zimbabwe ...
     
    list of our services following city
     
    Vientiane (Capital) | Pakse (Pakxe) | Savannakhet | Luang Prabang (Louangphrabang) | Xam Neua (Xam Nua, Sam Neua) | Phonsavan (Ban Phonsavan) | Thakhek | Muang Xay (Oudomxai) | Xaysomboun (Viengchan) | Pakxan (Muang Pakxan) | Attapeu (Attopu) | Houayxay | Luang Namtha | Phongsali (Phongsaly) | Sainyabuli (Xaignabouli) | Salavan (Saravane) | Sekong (Xekong) ...
     
    list of our services following Province
     
    Vientiane Prefecture | Champasak | Savannakhet | Luang Prabang (Louangphrabang) | Houaphanh | Xiangkhouang | Khammouane (Khammouan) | Oudomxay (Oudomxai) | Vientiane | Bolikhamsai (Bolikhamxai) | Attapeu (Attopu) | Bokeo | Luang Namtha | Phongsali (Phongsaly) | Sainyabuli (Xaignabouli) | Salavan (Saravane) | Sekong (Xekong) ...