Fatigue Testing
- LCF : Low cycle fatigue.
- HCF : High Cycle Fatigue.
- S-N Curve.
- Fatigue Life.
- Fatigue Strength.
- Fatigue Crack Growth Rate.
- This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries.
- This is rotating beam type machine in which load is applied in reversed bending fashion.
- The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment.
- The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.
- ASTM E606 - Standard Practice for Strain-Controlled Fatigue Testing lab
- ASTM E647 - Standard Test Method for Measurement of Fatigue Crack Growth Rates testing lab
- ASTM E9 – Room Temperature Compression Testing of Metallic Materials testing lab
- ASTM E 2714 – Standard Test Method for Creep-Fatigue Testing
- ASTM E466 - Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Material testing lab
- ASTM E21- Elevated Temperature Tension Tests for Metallic Material testing lab
- ISO 12106 - Metallic materials — Fatigue testing —Axial-strain-controlled method
- ISO 12108 - Metallic materials — Fatigue testing —Fatigue crack growth method
- ISO 12108 - 2002 (E) – Metallic materials – Fatigue testing – Fatigue crack growth Method
- IS16172 - 2014 Reinforcement Couplers for Mechanical Splices of Bars in Concrete- Specification
- Metal Testing(chemical Analysis-wet)
- Spectro Analysis(Metal Testing- Spectro)
- Ores Testing
- Ferro Alloy Testing
- Minerals Testing
- Minerals and Ores Testing
- Mechanical Testings
- Impact Testing
- Hardness Testing
- Microstructure
- PMI Testing
- Coating Thickness Testing
- Salt Spray Testing
- corrosion Testing
- Intergranular Corrosion Testing
- Stress Rupture Testing
- Fatigue & Fracture Toughness
- welder Qualification Testing
- Welding Electrode Qualification
- EQT Services
- Electrical Testing
- Failure Analysis
- Surface Coating Test
- XRF Testing
- In-situ Metallography
- Heat Exchanger Tube Inspection
- RLA Testing
- Borescope Testing
- Borescope Inspection Services
- Replica Testing
- SEM -EDS Analysis
- Metallurgical Testing
- Microstructure Defect Analysis Testing
- Microstructure Heat Treatment Analysis Testing
- Electrical Conductivity Testing
- Thermal Conductivity Testing
- Compression Testing
- Bending Testing
- Flexural Strength Testing
- Formability Testing
- Micro-Cleanliness Testing
- Salt Spray Corrosion Testing
- Plating Thickness Testing
- Density. Porosity Testing
- Stress Corrosion Cracking (SCC) Testing
- Environmental Stress Cracking (ESC) Testing
- Toughness Testing
- Melting Temperature Testing
- Dezincification. Coating Thickness by XRF Testing
- SEM Testing
- Cross Section Testing
- Fractography Testing
- Surface Analysis Testing
- Ductility Testing
- Reflectivity Testing
- Microstructure Testing
- Mechanical Properties Testing
- Machining Evaluation Testing
- Plating Evaluation Testing
- Impurity Inclusions Testing
- Tensile Testing
- Optical Emission Spectrography (OES) Testing
- Inductively Coupled Plasma (ICP) Testing
- Photomicrographic examination Testing
- Scanning Electron Microscopy Testing
- Specimen Preparation Testing
- Non-Destructive NDT Testing Testing
- Ultrasonic Testing
- Hydrostatic Pressure Testing
- Bearing Strength Testing
- Magnetic Particle Testing
- Liquid Penetration Testing
- X-Ray Inspection Testing
- Visual Inspection Testing
- Wear Resistance Testing
- Weld Failure Testing
- Plating Defects Testing
- Coating Defects Testing
- Microstructural Defects Testing
- Contaminant Investigations Testing
- Reverse Engineering Testing
- Ultrasonic Inspection (UT) Testing
- Magnetic Particle Inspection (MT) Testing
- Liquid Penetrant Inspection (PT). Weld Integrity Testing
- Weld Failure Testing
- Heat Affected Zone (HAZ) micro-hardness Testing
- Chemical Analysis Testing
- Glow Discharge Spectroscopy (GDS - Bulk Analysis) Testing
- Energy Dispersive Spectroscopy (EDS - Micro Analysis) Testing
- Non Destructive Testing
- Ndt Services
- Ultrasonic Testing
- Magnetic Particle Testing
- Dye Penetrant Testing
- Radiographic Testing
- Eddy Current Testing
- Vibration Analysis
- PAUT - TOFT
- Ultrasonic Thickness Gauging Testing
- Helium leak detection Services
- RFET / NFET / PECT Testing
- Internal Rotary Inspection system (IRIS)
- Acoustic Pulse Reflectometry (APR)
- Positive Material Identification Testing
- Magnetic flux leakage (MFL)
- Acoustic emission Testing
- Flouresent Leak Detection
- Long range ultrasonic testing - LRUT
- Thermography Inspection Services
- Leak Testing
- TKY Joints Ultrasonic Testing
- AWS D1.1 Structural steel ultrasonic Testing
Fatigue Testing lab Standards
METALLURGICAL TESTING SERVICES
NDT TESTING SERVICES (NON DESTRUCTIVE TESTING SERVICES)
metallurgical testing services in chennai list
non destructive testing services in chennai list