AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

DIN STANDARD STEEL SUPPLIERS
 
 
PLATES / PIPES & TUBES / SHEET / FORGING / FITTINGS / CASTINGS / STRUCTURAL STEEL etc...
 
Alloy Steel / Carbon Steel / S.S / Duplex Steel / Super Duplex / Nickel Alloy / Monel / Inconel / Hastelloy / Titanium / Alloy 20 /Copper Nickel..
 
Din Standard Flanges
 
 
  • DIN 2502 Flanges
  • DIN 2503 Flanges
  • DIN 2527 Flanges
  • DIN 2565 Flanges
  • DIN 2566 Flanges
  • DIN 2573 Flanges
  • DIN 2576 Flanges
  • DIN 2627 Flanges
  • DIN 2628 Flanges
  • DIN 2629 Flanges
  • DIN 2630 Flanges
  • DIN 2631 Flanges
  • DIN 2632 Flanges
  • DIN 2633 Flanges
  • DIN 2634 Flanges
  • DIN 2635 Flanges
  • DIN 2636 Flanges
  • DIN 2637 Flanges
  • DIN 2638 Flanges
  • DIN 2641 Flanges
  • DIN 2642 Flanges
  • DIN 2655 Flanges
  • DIN 2656 Flanges
  • DIN 86029 Flanges
  • DIN 86030 Flanges
  •  
    Stainless Steel DIN Flanges
     
  • DIN Flange EN 1092
  • DIN Flange EN 1092
  • ASME B16.47 DIN 2633 Flanges
  • ASME B16.47 DIN 2633 Flanges
  • DIN Class 150 Plate Flanges
  • DIN Class 150 Plate Flanges
  • ASTM A105 DIN RF flange
  • ASTM A105 DIN RF flange
  • ANSI B16.5 Class 150 DIN Flanges pn16
  • ANSI B16.5 Class 150 DIN Flanges pn16
  • ASTM A182 SS DIN ANSI Flanges
  • ASTM A182 SS DIN ANSI Flanges
  • Carbon Steel DIN Flanges EN 1092-1
  • Carbon Steel DIN Flanges EN 1092-1
  • Nickel Alloy DIN Flat Flange
  • Nickel Alloy DIN Flat Flange
  • Hastelloy C22 DIN Flanges raised face
  • Hastelloy C22 DIN Flanges raised face
  • Alloy Steel DIN slip on Flanges
  • Alloy Steel DIN slip on Flanges
  • Inconel Large DIN Flanges
  • Inconel Large DIN Flanges
  • ASTM A182 F304 DIN rtj flange
  • ASTM A182 F304 DIN rtj flange
  • Duplex Steel DIN 2512 Flanges tongue groove
  • Duplex Steel DIN 2512 Flanges tongue groove
  • Aluminium DIN Loose flange
  • Aluminium DIN Loose flange
  • ASTM A694 F42 DIN PN16 flange
  • ASTM A694 F42 DIN PN16 flange
  •  
    List of Flanges
     
  • Slip on Flanges
  • Weld Neck Flanges
  • Blind Flanges
  • Socket Weld Flanges
  • Orifice Flanges
  • Ring Type Joint Flanges
  • Threaded Flanges
  • Lap Joint Flanges
  • Long Weld Neck Flanges
  • Spectacle Blind Flanges
  • Paddle Blind Flanges
  • Ring Spacer Flanges
  • Backing Ring Flanges
  • Nipoflange
  • Weldoflange
  • Flangeolet
  • Bleed, Drip & Vent Ring Flanges
  • Forged Flange
  • ANSI Plate Flanges
  • Raised Face Flanges
  • Tongue and Groove Flanges
  • Male & Female Flanges
  • Reducing Flanges
  • ANSI/ASME B16.5 Flanges
  • ANSI/ASME B16.47 Flanges
  • BS 10 Flanges
  • DIN Standard Flanges
  • BS 4504 Flanges
  • EN 1092-1 Flanges
  • High Hub Blind Flanges
  • Square Flanges
  • Expander Flanges
  • MSS SP-44 Flanges
  • Korean Standard Flanges
  • AS/ANZ 4331.1 Flanges
  • Norwegian Standard Flanges
  • ISO Standard Flanges
  • UNI Standard Flanges
  • EN 1092-1 Type 01 Flanges
  • EN 1092-1 Type 02 Flanges
  • EN 1092-1 Type 05 Flanges
  • EN 1092-1 Type 11 Flanges
  • EN 1092-1 Type 13 Flanges
  • BS4504 Blind Flanges
  • BS4504 Plate Flanges
  • BS4504 Threaded Flanges
  • BS4504 Weld Neck Flanges
  • UNI Blind Flanges
  • UNI Loose Flanges
  • UNI Plate Flanges
  • UNI Threaded Flanges
  • UNI Welding Neck Flanges
  • JIS B2220 Flanges
  • API Flanges
  • GOST Standard Flanges
  • AWWA Flanges Standard
  •  
    DIN Carbon steels
     
     
  • DIN CK15
  • DIN C15
  • DIN C16.8
  • DIN C45
  • DIN CK45
  • DIN CF45
  • DIN CQ45
  • DIN 35S20
  • DIN 45S20
  • DIN 9SMn28
  • DIN 9SMn36
  • DIN 9SMnPb28
  • DIN 9SMnPb36
  •  
    DIN Alloy steels
     
  • DIN 25CrMo4
  • DIN GS-25CrMo4
  • DIN 41CrMo4
  • DIN 42CrMo4
  • DIN 42CrMoS4
  • DIN 43CrMo4
  • DIN 34CrNiMo6
  • DIN 40NiCrMo8-4
  • DIN 21NiCrMo22
  • DIN 21NiCrMo2
  • DIN 15Mo3
  •  
    DIN Stainless steels
     
  • DIN X10CrNiS18-9
  • DIN X5CrNi18-9
  • DIN X5CrNi18-10
  • DIN XCrNi19-9
  • DIN X5CrNiMo17 12 2
  • DIN X5CrNiMo17 13 3
  • DIN X5CrNiMo 19 11
  • DIN X5CrNiMo 18 11
  • DIN X6CrNiMoTi17-12
  • DIN X6CrNiTi18-10
  • DIN SEW 595 GX40CrNiSi25-20
  • DIN GX10NiCrSiNb32-20
  • DIN X6Cr17
  • DIN X105CrMo17
  • DIN X14CrMoS17
  • DIN X16CrNi16
  • DIN 16Mo5
  • DIN 14MoV6-3
  • DIN 17175 10CrMo910
  • DIN X10CrMoVNbN9-1
  • DIN X11CrMoWVNb9-1-1
  • DIN X12CrMoWVNbN10-1-1
  •  
    DIN Tool steels
     
  • DIN X32CrMoV3-3
  • DIN 32CrMoV12-28
  • DIN X153CrMoV12-1
  • DIN 100MnCrW4
  • DIN X100CrMoV51
  • DIN 45NiCrMo16
  • DIN 55NiCrMoV7
  • DIN 90MnCrV8
  • DIN X45NiCrMo4
  • DIN 60WCrV8
  • DIN 60WCrV7
  • DIN HS6-5-2C
  • DIN X100CrMoV5
  • DIN X153CrMoV12
  • DIN X210Cr12
  • DIN X210CrW12
  • DIN X40Cr14
  • DIN X40CrMoV5-1
  • DIN X155CrMoV12-1
  • DIN 100MnCrW4
  • DIN 40CrMnMo7
  • DIN 40CrMnMoS8-6
  •  
    DIN Standard Flat steel products
     
  • 1 Flat steel products
  • 1.1 Thick plate and hot-rolled strip
  • DIN EN 10029 1991-10 Hot rolled steel plate 3 mm thick or above – Tolerances on dimensions, shape and mass
  • DIN EN 10149-1 1995-11 Hot-rolled products made of high yield strength steels for cold
  • forming – General delivery conditions
  • DIN EN 10149-2 1995-11 Hot-rolled products made of high yield strength steels for cold
  • forming – Delivery conditions for thermomechanically rolled steels
  • DIN EN 10149-3 1995-11 Hot-rolled products made of high yield strength steels for cold
  • forming – Delivery conditions for normalized or normalized rolled steels
  • DIN EN 10164 2005-03 Steel products with improved deformation properties perpendicular to the surface of the product – Technical delivery conditions 27
  • DIN EN 10028-1 2003-09 Flat products made of steels for pressure purposes – Part 1:
  • General requirements
  • DIN EN 10028-2 2003-09 Flat products made of steels for pressure purposes – Part 2:
  • Non-alloy and alloy steels with specifi ed elevated temperature
  • properties
  • DIN EN 10028-2
  • Corrigendum 1
  • 2006-05 Flat products made of steels for pressure purposes – Part 2:
  • Non-alloy and alloy steels with specifi ed elevated temperature
  • properties – Corrigendum 1 to DIN EN 10028-2:2003-09
  • DIN EN 10028-3 2003-09 Flat products made of steels for pressure purposes – Part 3:
  • Weldable fi ne grain steels, normalized
  • DIN EN 10028-4 2003-09 Flat products made of steels for pressure purposes – Part 4:
  • Nickel alloyed steels with specifi ed low temperature properties 71
  • DIN EN 10028-4
  • Corrigendum 1
  • 2006-05 Flat products made of steels for pressure purposes – Part 4:
  • Nickel alloy steels with specifi ed low temperature properties –
  • Corrigendum 1 to DIN EN 10028-4:2003:09
  • DIN EN 10028-5 2003-09 Flat products made of steels for pressure purposes – Part 5:
  • Weldable fi ne grain steels, thermomechanically rolled
  • DIN EN 10028-6 2003-10 Flat products made of steels for pressure purposes – Part 6:
  • Weldable fi ne grain steels, quenched and tempered
  • DIN EN 10028-7 2008-02 Flat products made of steels for pressure purposes – Part 7:
  • Stainless steels
  • DIN EN 10207 2005-06 Steels for simple pressure vessels – Technical delivery requirements for plates, strips and bars
  • DIN EN 10048 1996-10 Hot rolled narrow steel strip – Dimensional and geometrical tolerances
  • DIN EN 10051 1997-11 Continuously hot rolled uncoated unalloyed and alloy steel plate,
  • sheet and strip – Tolerances on dimensions and shape (includes Amendment A1:1997)
  • DIN EN 10111 1998-03 Continuously hot-rolled low carbon steel sheet and strip for cold
  • forming – Technical delivery conditions
  •  
    DIN Standard Cold-rolled strip
     
  • 1.2 Cold-rolled strip
  • DIN EN 10131 2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically
  • coated low carbon and high yield strength steel fl at products for
  • cold forming – Tolerances on dimensions and shape
  • DIN EN 10140 2006-09 Cold rolled narrow steel strip – Tolerances on dimensions and shape
  • DIN EN ISO 9445 2006-05 Continuously cold-rolled stainless steel narrow strip, wide strip,
  • plate/sheet and cut lengths – Tolerances on dimensions and form (ISO 9445:2002)
  • DIN 1623-2 1986-02 Steel fl at products – Cold reduced sheet and strip – Technical delivery conditions – General purpose structural steels
  • DIN EN 10130 2007-02 Cold rolled low carbon steel fl at products for cold forming – Technical delivery conditions
  • DIN EN 10139 1997-12 Cold rolled uncoated mild steel narrow strip for cold forming – Technical delivery conditions.
  • DIN EN 10303 2001-07 Thin magnetic steel sheet and strip for use at medium frequencies
  • DIN EN 10106 2007-11 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state
  • DIN EN 10107 2005-10 Grain-oriented electrical steel sheet and strip delivered in the fully processed state
  • DIN EN 10341 2006-08 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
  • DIN EN 10209 1996-05 Cold rolled low carbon steel fl at products for vitreous enamelling – Technical delivery conditions
  • DIN EN 10132-1 2000-05 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 1: General
  • DIN EN 10132-2 2000-05 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 2: Case hardening steels
  • DIN EN 10132-3 2000-05 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 3: Steels for quenching and tempering
  • DIN EN 10132-4 2003-04 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 4: Spring steels and other applications
  • DIN EN 10151 2003-02 Stainless steel strip for springs – Technical delivery conditions
  •  
    DIN Standard Coated cold-rolled strip
     
  • 1.3 Coated cold-rolled strip
  • DIN EN 10326 2004-09 Continuously hot-dip coated strip and sheet of structural steels –
  • Technical delivery conditions
  • DIN EN 10327 2004-09 Continuously hot-dip coated strip and sheet of low carbon steels
  • for cold forming – Technical delivery conditions
  • DIN EN 10152 2003-08 Electrolytically zinc coated cold rolled steel fl at products for cold
  • forming – Technical delivery conditions
  • DIN EN 10205 1992-01 Cold reduced blackplate in coil form for the production of tinplate
  • or electrolytic chromium/chromium oxide coated steel
  • DIN EN 10202 2001-07 Cold reduced tinmill products – Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
  • DIN EN 10169-1 2004-04 Continuously organic coated (coil coated) steel fl at products – Part 1: General information (defi nitions, materials, tolerances,test methods)
  •  
    DIN Standard Long steel products
     
  • 2. Long steel products
  • 2.1 Steel sections
  • DIN 536-1 1991-09 Crane rails – hot rolled fl at bottom crane rails (type A) – dimensions, section parameters and steel grades
  • DIN 536-2 1991-09 Crane rails, Type F (Flat) – Dimensions, static values, steel grades
  • DIN EN 10024 1995-05 Hot rolled steel taper fl ange I sections – Tolerances on shape and dimensions
  • DIN 1025-1 1995-05 Hot rolled steel I and H sections – Sections with narrow taper
  • fl ange (I series) – Dimensions, mass and static parameters
  • DIN 1025-2 1995-05 Hot rolled I and H sections (IPB series) – Dimensions, mass and static parameters
  • DIN 1025-3 1994-03 Hot rolled I and H sections (IPBl series) – Dimensions, mass and static parameters
  • DIN 1025-4 1994-03 Hot rolled I and H sections (IPBv series) – Dimensions, mass and static parameters
  • DIN 1025-5 1994-03 Hot rolled I and H sections (IPE series) – Dimensions, mass and static parameters
  • DIN EN 10034 1994-03 Structural steel I and H sections – Tolerances on shape and dimensions
  • DIN 1026-1 2000-03 Hot-rolled steel channels with taper fl anges – Dimensions, mass and static parameters
  • DIN 1026-1 Corrigendum 1 2002-11 Hot-rolled steel channels with taper fl anges – Dimensions, mass and static parameters – Corrigendum 1
  • DIN EN 10279 2000-03 Hot rolled steel channels – Tolerances on shape, dimensions and mass
  • DIN EN 10056-1 1998-10 Structural steel equal and unequal leg angles – Part 1: Dimensions
  • DIN EN 10056-2 1994-03 Structural steel equal and unequal leg angles – Tolerances on shape and dimensions
  • DIN EN 10067 1996-12 Hot rolled bulb fl ats – Dimensions and tolerances on shape, dimensions and mass
  • DIN EN 10055 1995-12 Hot rolled steel equal fl ange tees with radiused root and toes – Dimensions and tolerances on shape and dimensions
  • DIN EN 10162 2003-12 Cold-rolled steel sections – Technical delivery conditions – Dimensional and cross-sectional tolerances
  •  
    DIN Standard Hot-rolled steel bars
     
  • 2.2 Hot-rolled steel bars
  • DIN EN 10058 2004-02 Hot rolled fl at steel bars for general purposes – Dimensions and tolerances on shape and dimensions
  • DIN EN 10059 2004-02 Hot rolled square steel bars for general purposes – Dimensions and tolerances on shape and dimensions
  • DIN EN 10060 2004-02 Hot rolled round steel bars – Dimensions and tolerances on shape and dimensions
  • DIN EN 10061 2004-02 Hot rolled hexagon steel bars – Dimensions and tolerances on shape and dimensions
  • DIN 1022 2004-04 Bars made hot-rolled square-edged steel equal angles (LS-steel bars) – Dimensions and mass
  • DIN 1027 2004-04 Bars made of hot rolled steel Zee sections with rounded roots and toes – Dimensions, mass and static parameters
  • DIN EN 10092-2 2004-01 Hot rolled spring steel fl at bars – Part 2: Ribbed and grooved spring leaves, dimensions and tolerances on shape and dimensions
  • DIN 17115 1987-02 Steels for welded round link chains – technical delivery conditions
  •  
    DIN Standard Steel rod
     
  • 2.3 Steel rod
  • DIN EN 10016-1 1995-04 Non-alloy steel rod for drawing or cold rolling – General requirements
  • DIN EN 10016-2 1995-04 Non-alloy steel rod for drawing or cold rolling – Specifi c requirements for general purpose rod
  • DIN EN 10016-3 1995-04 Non-alloy steel rod for drawing or cold rolling – Specifi c requirements for rimmed and rimmed substitute low carbon steel rod
  • DIN EN 10016-4 1995-04 Non-alloy steel rod for drawing or cold rolling – Specifi c requirements for rod for special applications
  • DIN EN 10017 2005-01 Steel rod for drawing and/or cold rolling – Dimensions and tolerances
  • DIN EN 10108 2005-01 Round steel rod for cold heading and cold extrusion – Dimensions and tolerances
  • DIN EN 10089 2003-04 Hot rolled steels for quenched and tempered springs – Technical delivery conditions
  • DIN EN 10263-1 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 1: General technical delivery conditions
  • DIN EN 10263-2 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
  • DIN EN 10263-3 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 3: Technical delivery conditions for case hardening steels
  • DIN EN 10263-4 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 4: Technical delivery conditions for steels for quenching and tempering
  • DIN EN 10263-5 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 5: Technical delivery conditions for stainless steels
  •  
    DIN Standard Bright steel bars
     
  • 2.4 Bright steel bars
  • DIN EN 10277-1 1999-10 Bright products – Technical delivery conditions – Part 1: General 656
  • DIN EN 10277-2 1999-10 Bright steel products – Technical delivery conditions – Part 2: Steels for general engineering purposes
  • DIN EN 10277-3 1999-10 Bright steel products – Technical delivery conditions – Part 3: Free-cutting steels
  • DIN EN 10277-4 1999-10 Bright steel products – Technical delivery conditions – Part 4: Case-hardening steels
  • DIN EN 10277-5 1999-10 Bright steel products – Technical delivery conditions – Part 5: Steels for quenching and tempering
  • DIN EN 10278 1999-12 Dimensions and tolerances of bright steel products
  • DIN 59350 1982-08 Precision fl at and square steel bars – Dimensions, weights, permissible deviations
  •  
    DIN Standard Drawn steel wire
     
  • 2.5 Drawn steel wire
  • DIN EN 10218-2 1996-08 Steel wire and wire products: General – Wire dimensions and tolerances
  • DIN 1653 1979-01 Surface condition of commercial steel wires – Denominations and abbreviations thereof
  • DIN EN 10264-1 2002-06 Steel wire and wire products – Steel wire for ropes – Part 1: General requirements
  • DIN EN 10264-2 2002-06 Steel wire and wire products – Steel wire for ropes – Part 2: Cold drawn non alloyed steel wire for ropes for general applications
  • DIN EN 10270-1 2001-12 Steel wire for mechanical springs – Part 1: Patented cold drawn unalloyed steel wire
  • DIN EN 10270-2 2001-12 Steel wire for mechanical springs – Part 2: Oil hardened and tempered spring steel wire
  • DIN EN 10270-3 2001-08 Steel wire for mechanical springs – Part 3: Stainless spring steel wire
  •  
    DIN Standard Coated steel wire
     
  • 2.6 Coated steel wire
  • DIN EN 10244-2 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 2: Zinc or zinc alloy coatings
  • DIN EN 10244-3 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 3: Aluminium coatings
  • DIN EN 10244-4 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 4: Tin coatings
  • DIN EN 10244-5 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 5: Nickel coatings
  • DIN EN 10244-6 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 6: Copper, bronze or brass coatings
  • DIN EN 10245-1 2001-07 Steel wire and wire products – Organic coatings on wire – Part 1: General rules
  • DIN EN 10245-2 2001-07 Steel wire and wire products – Organic coatings on wire – Part 2: PVC coated wire
  • DIN EN 10245-3 2001-07 Steel wire and wire products – Organic coatings on wire – Part 3: PE coated wire
  •  
    Din Standard Flanges
     
     
    DIN 2502 Flanges Supplier in chennai , DIN 2503 Flanges Supplier in chennai , DIN 2527 Flanges Supplier in chennai , DIN 2565 Flanges Supplier in chennai , DIN 2566 Flanges Supplier in chennai , DIN 2573 Flanges Supplier in chennai , DIN 2576 Flanges Supplier in chennai , DIN 2627 Flanges Supplier in chennai , DIN 2628 Flanges Supplier in chennai , DIN 2629 Flanges Supplier in chennai , DIN 2630 Flanges Supplier in chennai , DIN 2631 Flanges Supplier in chennai , DIN 2632 Flanges Supplier in chennai , DIN 2633 Flanges Supplier in chennai , DIN 2634 Flanges Supplier in chennai , DIN 2635 Flanges Supplier in chennai , DIN 2636 Flanges Supplier in chennai , DIN 2637 Flanges Supplier in chennai , DIN 2638 Flanges Supplier in chennai , DIN 2641 Flanges Supplier in chennai , DIN 2642 Flanges Supplier in chennai , DIN 2655 Flanges Supplier in chennai , DIN 2656 Flanges Supplier in chennai , DIN 86029 Flanges Supplier in chennai , DIN 86030 Flanges Supplier in chennai ...
     
    Stainless Steel DIN Flanges
     
    DIN Flange EN 1092 Supplier in chennai , DIN Flange EN 1092 Supplier in chennai , ASME B16.47 DIN 2633 Flanges Supplier in chennai , ASME B16.47 DIN 2633 Flanges Supplier in chennai , DIN Class 150 Plate Flanges Supplier in chennai , DIN Class 150 Plate Flanges Supplier in chennai , ASTM A105 DIN RF flange Supplier in chennai , ASTM A105 DIN RF flange Supplier in chennai , ANSI B16.5 Class 150 DIN Flanges pn16 Supplier in chennai , ANSI B16.5 Class 150 DIN Flanges pn16 Supplier in chennai , ASTM A182 SS DIN ANSI Flanges Supplier in chennai , ASTM A182 SS DIN ANSI Flanges Supplier in chennai , Carbon Steel DIN Flanges EN 1092-1 Supplier in chennai , Carbon Steel DIN Flanges EN 1092-1 Supplier in chennai , Nickel Alloy DIN Flat Flange Supplier in chennai , Nickel Alloy DIN Flat Flange Supplier in chennai , Hastelloy C22 DIN Flanges raised face Supplier in chennai , Hastelloy C22 DIN Flanges raised face Supplier in chennai , Alloy Steel DIN slip on Flanges Supplier in chennai , Alloy Steel DIN slip on Flanges Supplier in chennai , Inconel Large DIN Flanges Supplier in chennai , Inconel Large DIN Flanges Supplier in chennai , ASTM A182 F304 DIN rtj flange Supplier in chennai , ASTM A182 F304 DIN rtj flange Supplier in chennai , Duplex Steel DIN 2512 Flanges tongue groove Supplier in chennai , Duplex Steel DIN 2512 Flanges tongue groove Supplier in chennai , Aluminium DIN Loose flange Supplier in chennai , Aluminium DIN Loose flange Supplier in chennai , ASTM A694 F42 DIN PN16 flange Supplier in chennai , ASTM A694 F42 DIN PN16 flange Supplier in chennai ...
     
    List of Flanges
     
    Slip on Flanges Supplier in chennai , Weld Neck Flanges Supplier in chennai , Blind Flanges Supplier in chennai , Socket Weld Flanges Supplier in chennai , Orifice Flanges Supplier in chennai , Ring Type Joint Flanges Supplier in chennai , Threaded Flanges Supplier in chennai , Lap Joint Flanges Supplier in chennai , Long Weld Neck Flanges Supplier in chennai , Spectacle Blind Flanges Supplier in chennai , Paddle Blind Flanges Supplier in chennai , Ring Spacer Flanges Supplier in chennai , Backing Ring Flanges Supplier in chennai , Nipoflange Supplier in chennai , Weldoflange Supplier in chennai , Flangeolet Supplier in chennai , Bleed, Drip & Vent Ring Flanges Supplier in chennai , Forged Flange Supplier in chennai , ANSI Plate Flanges Supplier in chennai , Raised Face Flanges Supplier in chennai , Tongue and Groove Flanges Supplier in chennai , Male & Female Flanges Supplier in chennai , Reducing Flanges Supplier in chennai , ANSI/ASME B16.5 Flanges Supplier in chennai , ANSI/ASME B16.47 Flanges Supplier in chennai , BS 10 Flanges Supplier in chennai , DIN Standard Flanges Supplier in chennai , BS 4504 Flanges Supplier in chennai , EN 1092-1 Flanges Supplier in chennai , High Hub Blind Flanges Supplier in chennai , Square Flanges Supplier in chennai , Expander Flanges Supplier in chennai , MSS SP-44 Flanges Supplier in chennai , Korean Standard Flanges Supplier in chennai , AS/ANZ 4331.1 Flanges Supplier in chennai , Norwegian Standard Flanges Supplier in chennai , ISO Standard Flanges Supplier in chennai , UNI Standard Flanges Supplier in chennai , EN 1092-1 Type 01 Flanges Supplier in chennai , EN 1092-1 Type 02 Flanges Supplier in chennai , EN 1092-1 Type 05 Flanges Supplier in chennai , EN 1092-1 Type 11 Flanges Supplier in chennai , EN 1092-1 Type 13 Flanges Supplier in chennai , BS4504 Blind Flanges Supplier in chennai , BS4504 Plate Flanges Supplier in chennai , BS4504 Threaded Flanges Supplier in chennai , BS4504 Weld Neck Flanges Supplier in chennai , UNI Blind Flanges Supplier in chennai , UNI Loose Flanges Supplier in chennai , UNI Plate Flanges Supplier in chennai , UNI Threaded Flanges Supplier in chennai , UNI Welding Neck Flanges Supplier in chennai , JIS B2220 Flanges Supplier in chennai , API Flanges Supplier in chennai , GOST Standard Flanges Supplier in chennai , AWWA Flanges Standard Supplier in chennai ...
     
    DIN Carbon steels
     
     
    DIN CK15 Supplier in chennai , DIN C15 Supplier in chennai , DIN C16.8 Supplier in chennai , DIN C45 Supplier in chennai , DIN CK45 Supplier in chennai , DIN CF45 Supplier in chennai , DIN CQ45 Supplier in chennai , DIN 35S20 Supplier in chennai , DIN 45S20 Supplier in chennai , DIN 9SMn28 Supplier in chennai , DIN 9SMn36 Supplier in chennai , DIN 9SMnPb28 Supplier in chennai , DIN 9SMnPb36 Supplier in chennai ...
     
    DIN Alloy steels
     
    DIN 25CrMo4 Supplier in chennai , DIN GS-25CrMo4 Supplier in chennai , DIN 41CrMo4 Supplier in chennai , DIN 42CrMo4 Supplier in chennai , DIN 42CrMoS4 Supplier in chennai , DIN 43CrMo4 Supplier in chennai , DIN 34CrNiMo6 Supplier in chennai , DIN 40NiCrMo8-4 Supplier in chennai , DIN 21NiCrMo22 Supplier in chennai , DIN 21NiCrMo2 Supplier in chennai , DIN 15Mo3 Supplier in chennai ...
     
    DIN Stainless steels
     
    DIN X10CrNiS18-9 Supplier in chennai , DIN X5CrNi18-9 Supplier in chennai , DIN X5CrNi18-10 Supplier in chennai , DIN XCrNi19-9 Supplier in chennai , DIN X5CrNiMo17 12 2 Supplier in chennai , DIN X5CrNiMo17 13 3 Supplier in chennai , DIN X5CrNiMo 19 11 Supplier in chennai , DIN X5CrNiMo 18 11 Supplier in chennai , DIN X6CrNiMoTi17-12 Supplier in chennai , DIN X6CrNiTi18-10 Supplier in chennai , DIN SEW 595 GX40CrNiSi25-20 Supplier in chennai , DIN GX10NiCrSiNb32-20 Supplier in chennai , DIN X6Cr17 Supplier in chennai , DIN X105CrMo17 Supplier in chennai , DIN X14CrMoS17 Supplier in chennai , DIN X16CrNi16 Supplier in chennai , DIN 16Mo5 Supplier in chennai , DIN 14MoV6-3 Supplier in chennai , DIN 17175 10CrMo910 Supplier in chennai , DIN X10CrMoVNbN9-1 Supplier in chennai , DIN X11CrMoWVNb9-1-1 Supplier in chennai , DIN X12CrMoWVNbN10-1-1 Supplier in chennai ...
     
    DIN Tool steels
     
    DIN X32CrMoV3-3 Supplier in chennai , DIN 32CrMoV12-28 Supplier in chennai , DIN X153CrMoV12-1 Supplier in chennai , DIN 100MnCrW4 Supplier in chennai , DIN X100CrMoV51 Supplier in chennai , DIN 45NiCrMo16 Supplier in chennai , DIN 55NiCrMoV7 Supplier in chennai , DIN 90MnCrV8 Supplier in chennai , DIN X45NiCrMo4 Supplier in chennai , DIN 60WCrV8 Supplier in chennai , DIN 60WCrV7 Supplier in chennai , DIN HS6-5-2C Supplier in chennai , DIN X100CrMoV5 Supplier in chennai , DIN X153CrMoV12 Supplier in chennai , DIN X210Cr12 Supplier in chennai , DIN X210CrW12 Supplier in chennai , DIN X40Cr14 Supplier in chennai , DIN X40CrMoV5-1 Supplier in chennai , DIN X155CrMoV12-1 Supplier in chennai , DIN 100MnCrW4 Supplier in chennai , DIN 40CrMnMo7 Supplier in chennai , DIN 40CrMnMoS8-6 Supplier in chennai ...
     
    DIN Standard Flat steel products
     
    1 Flat steel products Supplier in chennai , 1.1 Thick plate and hot-rolled strip Supplier in chennai , DIN EN 10029 1991-10 Hot rolled steel plate 3 mm thick or above – Tolerances on dimensions, shape and mass Supplier in chennai , DIN EN 10149-1 1995-11 Hot-rolled products made of high yield strength steels for cold Supplier in chennai , forming – General delivery conditions Supplier in chennai , DIN EN 10149-2 1995-11 Hot-rolled products made of high yield strength steels for cold Supplier in chennai , forming – Delivery conditions for thermomechanically rolled steels Supplier in chennai , DIN EN 10149-3 1995-11 Hot-rolled products made of high yield strength steels for cold Supplier in chennai , forming – Delivery conditions for normalized or normalized rolled steels Supplier in chennai , DIN EN 10164 2005-03 Steel products with improved deformation properties perpendicular to the surface of the product – Technical delivery conditions 27 Supplier in chennai , DIN EN 10028-1 2003-09 Flat products made of steels for pressure purposes – Part 1: Supplier in chennai , General requirements Supplier in chennai , DIN EN 10028-2 2003-09 Flat products made of steels for pressure purposes – Part 2: Supplier in chennai , Non-alloy and alloy steels with specifi ed elevated temperature Supplier in chennai , properties Supplier in chennai , DIN EN 10028-2 Supplier in chennai , Corrigendum 1 Supplier in chennai , 2006-05 Flat products made of steels for pressure purposes – Part 2: Supplier in chennai , Non-alloy and alloy steels with specifi ed elevated temperature Supplier in chennai , properties – Corrigendum 1 to DIN EN 10028-2:2003-09 Supplier in chennai , DIN EN 10028-3 2003-09 Flat products made of steels for pressure purposes – Part 3: Supplier in chennai , Weldable fi ne grain steels, normalized Supplier in chennai , DIN EN 10028-4 2003-09 Flat products made of steels for pressure purposes – Part 4: Supplier in chennai , Nickel alloyed steels with specifi ed low temperature properties 71 Supplier in chennai , DIN EN 10028-4 Supplier in chennai , Corrigendum 1 Supplier in chennai , 2006-05 Flat products made of steels for pressure purposes – Part 4: Supplier in chennai , Nickel alloy steels with specifi ed low temperature properties – Supplier in chennai , Corrigendum 1 to DIN EN 10028-4:2003:09 Supplier in chennai , DIN EN 10028-5 2003-09 Flat products made of steels for pressure purposes – Part 5: Supplier in chennai , Weldable fi ne grain steels, thermomechanically rolled Supplier in chennai , DIN EN 10028-6 2003-10 Flat products made of steels for pressure purposes – Part 6: Supplier in chennai , Weldable fi ne grain steels, quenched and tempered Supplier in chennai , DIN EN 10028-7 2008-02 Flat products made of steels for pressure purposes – Part 7: Supplier in chennai , Stainless steels Supplier in chennai , DIN EN 10207 2005-06 Steels for simple pressure vessels – Technical delivery requirements for plates, strips and bars Supplier in chennai , DIN EN 10048 1996-10 Hot rolled narrow steel strip – Dimensional and geometrical tolerances Supplier in chennai , DIN EN 10051 1997-11 Continuously hot rolled uncoated unalloyed and alloy steel plate, Supplier in chennai , sheet and strip – Tolerances on dimensions and shape (includes Amendment A1:1997) Supplier in chennai , DIN EN 10111 1998-03 Continuously hot-rolled low carbon steel sheet and strip for cold Supplier in chennai , forming – Technical delivery conditions Supplier in chennai ...
     
    DIN Standard Cold-rolled strip
     
    1.2 Cold-rolled strip Supplier in chennai , DIN EN 10131 2006-09 Cold rolled uncoated and zinc or zinc-nickel electrolytically Supplier in chennai , coated low carbon and high yield strength steel fl at products for Supplier in chennai , cold forming – Tolerances on dimensions and shape Supplier in chennai , DIN EN 10140 2006-09 Cold rolled narrow steel strip – Tolerances on dimensions and shape Supplier in chennai , DIN EN ISO 9445 2006-05 Continuously cold-rolled stainless steel narrow strip, wide strip, Supplier in chennai , plate/sheet and cut lengths – Tolerances on dimensions and form (ISO 9445:2002) Supplier in chennai , DIN 1623-2 1986-02 Steel fl at products – Cold reduced sheet and strip – Technical delivery conditions – General purpose structural steels Supplier in chennai , DIN EN 10130 2007-02 Cold rolled low carbon steel fl at products for cold forming – Technical delivery conditions Supplier in chennai , DIN EN 10139 1997-12 Cold rolled uncoated mild steel narrow strip for cold forming – Technical delivery conditions. Supplier in chennai , DIN EN 10303 2001-07 Thin magnetic steel sheet and strip for use at medium frequencies Supplier in chennai , DIN EN 10106 2007-11 Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state Supplier in chennai , DIN EN 10107 2005-10 Grain-oriented electrical steel sheet and strip delivered in the fully processed state Supplier in chennai , DIN EN 10341 2006-08 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state Supplier in chennai , DIN EN 10209 1996-05 Cold rolled low carbon steel fl at products for vitreous enamelling – Technical delivery conditions Supplier in chennai , DIN EN 10132-1 2000-05 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 1: General Supplier in chennai , DIN EN 10132-2 2000-05 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 2: Case hardening steels Supplier in chennai , DIN EN 10132-3 2000-05 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 3: Steels for quenching and tempering Supplier in chennai , DIN EN 10132-4 2003-04 Cold-rolled narrow steel strip for heat-treatment – Technical delivery conditions – Part 4: Spring steels and other applications Supplier in chennai , DIN EN 10151 2003-02 Stainless steel strip for springs – Technical delivery conditions Supplier in chennai ...
     
    DIN Standard Coated cold-rolled strip
     
    1.3 Coated cold-rolled strip Supplier in chennai , DIN EN 10326 2004-09 Continuously hot-dip coated strip and sheet of structural steels – Supplier in chennai , Technical delivery conditions Supplier in chennai , DIN EN 10327 2004-09 Continuously hot-dip coated strip and sheet of low carbon steels Supplier in chennai , for cold forming – Technical delivery conditions Supplier in chennai , DIN EN 10152 2003-08 Electrolytically zinc coated cold rolled steel fl at products for cold Supplier in chennai , forming – Technical delivery conditions Supplier in chennai , DIN EN 10205 1992-01 Cold reduced blackplate in coil form for the production of tinplate Supplier in chennai , or electrolytic chromium/chromium oxide coated steel Supplier in chennai , DIN EN 10202 2001-07 Cold reduced tinmill products – Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel Supplier in chennai , DIN EN 10169-1 2004-04 Continuously organic coated (coil coated) steel fl at products – Part 1: General information (defi nitions, materials, tolerances,test methods) Supplier in chennai ...
     
    DIN Standard Long steel products
     
    2. Long steel products Supplier in chennai , 2.1 Steel sections Supplier in chennai , DIN 536-1 1991-09 Crane rails – hot rolled fl at bottom crane rails (type A) – dimensions, section parameters and steel grades Supplier in chennai , DIN 536-2 1991-09 Crane rails, Type F (Flat) – Dimensions, static values, steel grades Supplier in chennai , DIN EN 10024 1995-05 Hot rolled steel taper fl ange I sections – Tolerances on shape and dimensions Supplier in chennai , DIN 1025-1 1995-05 Hot rolled steel I and H sections – Sections with narrow taper Supplier in chennai , fl ange (I series) – Dimensions, mass and static parameters Supplier in chennai , DIN 1025-2 1995-05 Hot rolled I and H sections (IPB series) – Dimensions, mass and static parameters Supplier in chennai , DIN 1025-3 1994-03 Hot rolled I and H sections (IPBl series) – Dimensions, mass and static parameters Supplier in chennai , DIN 1025-4 1994-03 Hot rolled I and H sections (IPBv series) – Dimensions, mass and static parameters Supplier in chennai , DIN 1025-5 1994-03 Hot rolled I and H sections (IPE series) – Dimensions, mass and static parameters Supplier in chennai , DIN EN 10034 1994-03 Structural steel I and H sections – Tolerances on shape and dimensions Supplier in chennai , DIN 1026-1 2000-03 Hot-rolled steel channels with taper fl anges – Dimensions, mass and static parameters Supplier in chennai , DIN 1026-1 Corrigendum 1 2002-11 Hot-rolled steel channels with taper fl anges – Dimensions, mass and static parameters – Corrigendum 1 Supplier in chennai , DIN EN 10279 2000-03 Hot rolled steel channels – Tolerances on shape, dimensions and mass Supplier in chennai , DIN EN 10056-1 1998-10 Structural steel equal and unequal leg angles – Part 1: Dimensions Supplier in chennai , DIN EN 10056-2 1994-03 Structural steel equal and unequal leg angles – Tolerances on shape and dimensions Supplier in chennai , DIN EN 10067 1996-12 Hot rolled bulb fl ats – Dimensions and tolerances on shape, dimensions and mass Supplier in chennai , DIN EN 10055 1995-12 Hot rolled steel equal fl ange tees with radiused root and toes – Dimensions and tolerances on shape and dimensions Supplier in chennai , DIN EN 10162 2003-12 Cold-rolled steel sections – Technical delivery conditions – Dimensional and cross-sectional tolerances Supplier in chennai ...
     
    DIN Standard Hot-rolled steel bars
     
    2.2 Hot-rolled steel bars Supplier in chennai , DIN EN 10058 2004-02 Hot rolled fl at steel bars for general purposes – Dimensions and tolerances on shape and dimensions Supplier in chennai , DIN EN 10059 2004-02 Hot rolled square steel bars for general purposes – Dimensions and tolerances on shape and dimensions Supplier in chennai , DIN EN 10060 2004-02 Hot rolled round steel bars – Dimensions and tolerances on shape and dimensions Supplier in chennai , DIN EN 10061 2004-02 Hot rolled hexagon steel bars – Dimensions and tolerances on shape and dimensions Supplier in chennai , DIN 1022 2004-04 Bars made hot-rolled square-edged steel equal angles (LS-steel bars) – Dimensions and mass Supplier in chennai , DIN 1027 2004-04 Bars made of hot rolled steel Zee sections with rounded roots and toes – Dimensions, mass and static parameters Supplier in chennai , DIN EN 10092-2 2004-01 Hot rolled spring steel fl at bars – Part 2: Ribbed and grooved spring leaves, dimensions and tolerances on shape and dimensions Supplier in chennai , DIN 17115 1987-02 Steels for welded round link chains – technical delivery conditions Supplier in chennai ...
     
    DIN Standard Steel rod
     
    2.3 Steel rod Supplier in chennai , DIN EN 10016-1 1995-04 Non-alloy steel rod for drawing or cold rolling – General requirements Supplier in chennai , DIN EN 10016-2 1995-04 Non-alloy steel rod for drawing or cold rolling – Specifi c requirements for general purpose rod Supplier in chennai , DIN EN 10016-3 1995-04 Non-alloy steel rod for drawing or cold rolling – Specifi c requirements for rimmed and rimmed substitute low carbon steel rod Supplier in chennai , DIN EN 10016-4 1995-04 Non-alloy steel rod for drawing or cold rolling – Specifi c requirements for rod for special applications Supplier in chennai , DIN EN 10017 2005-01 Steel rod for drawing and/or cold rolling – Dimensions and tolerances Supplier in chennai , DIN EN 10108 2005-01 Round steel rod for cold heading and cold extrusion – Dimensions and tolerances Supplier in chennai , DIN EN 10089 2003-04 Hot rolled steels for quenched and tempered springs – Technical delivery conditions Supplier in chennai , DIN EN 10263-1 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 1: General technical delivery conditions Supplier in chennai , DIN EN 10263-2 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working Supplier in chennai , DIN EN 10263-3 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 3: Technical delivery conditions for case hardening steels Supplier in chennai , DIN EN 10263-4 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 4: Technical delivery conditions for steels for quenching and tempering Supplier in chennai , DIN EN 10263-5 2002-02 Steel rod, bars and wire for cold heading and cold extrusion – Part 5: Technical delivery conditions for stainless steels Supplier in chennai ...
     
    DIN Standard Bright steel bars
     
    2.4 Bright steel bars Supplier in chennai , DIN EN 10277-1 1999-10 Bright products – Technical delivery conditions – Part 1: General 656 Supplier in chennai , DIN EN 10277-2 1999-10 Bright steel products – Technical delivery conditions – Part 2: Steels for general engineering purposes Supplier in chennai , DIN EN 10277-3 1999-10 Bright steel products – Technical delivery conditions – Part 3: Free-cutting steels Supplier in chennai , DIN EN 10277-4 1999-10 Bright steel products – Technical delivery conditions – Part 4: Case-hardening steels Supplier in chennai , DIN EN 10277-5 1999-10 Bright steel products – Technical delivery conditions – Part 5: Steels for quenching and tempering Supplier in chennai , DIN EN 10278 1999-12 Dimensions and tolerances of bright steel products Supplier in chennai , DIN 59350 1982-08 Precision fl at and square steel bars – Dimensions, weights, permissible deviations Supplier in chennai ...
     
    DIN Standard Drawn steel wire
     
    2.5 Drawn steel wire Supplier in chennai , DIN EN 10218-2 1996-08 Steel wire and wire products: General – Wire dimensions and tolerances Supplier in chennai , DIN 1653 1979-01 Surface condition of commercial steel wires – Denominations and abbreviations thereof Supplier in chennai , DIN EN 10264-1 2002-06 Steel wire and wire products – Steel wire for ropes – Part 1: General requirements Supplier in chennai , DIN EN 10264-2 2002-06 Steel wire and wire products – Steel wire for ropes – Part 2: Cold drawn non alloyed steel wire for ropes for general applications Supplier in chennai , DIN EN 10270-1 2001-12 Steel wire for mechanical springs – Part 1: Patented cold drawn unalloyed steel wire Supplier in chennai , DIN EN 10270-2 2001-12 Steel wire for mechanical springs – Part 2: Oil hardened and tempered spring steel wire Supplier in chennai , DIN EN 10270-3 2001-08 Steel wire for mechanical springs – Part 3: Stainless spring steel wire Supplier in chennai ...
     
    DIN Standard Coated steel wire
     
    2.6 Coated steel wire Supplier in chennai , DIN EN 10244-2 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 2: Zinc or zinc alloy coatings Supplier in chennai , DIN EN 10244-3 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 3: Aluminium coatings Supplier in chennai , DIN EN 10244-4 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 4: Tin coatings Supplier in chennai , DIN EN 10244-5 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 5: Nickel coatings Supplier in chennai , DIN EN 10244-6 2001-07 Steel wire and wire products – Non-ferrous metallic coatings on steel wire – Part 6: Copper, bronze or brass coatings Supplier in chennai , DIN EN 10245-1 2001-07 Steel wire and wire products – Organic coatings on wire – Part 1: General rules Supplier in chennai , DIN EN 10245-2 2001-07 Steel wire and wire products – Organic coatings on wire – Part 2: PVC coated wire Supplier in chennai , DIN EN 10245-3 2001-07 Steel wire and wire products – Organic coatings on wire – Part 3: PE coated wire Supplier in chennai ...