AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

Water leakage/seepage Investigation - Building
 
 
 
1. What are the common causes of water leakage?
 
Common causes of water leakage :
 
  • * Leakage in the drainage pipes of the upper, adjacent or your own flat.
  • * Leakage in the water supply pipes of the upper, adjacent or your own flat.
  • * Deteriorated waterproofing of floor slabs or bath-tub seals.
  • * Seepage of waste water or rain water through roof / external wall.
  •  
    water seepage Testing methods
     
  • 1. Dye Tracer Test
  • 2. Electrical capacitance Investigation
  • 3. Electrical Resistance Investigation
  • 4. Microwave Leakage Testing
  • 5. Infrared Thermography Testing
  • 6. Pressure Test
  • 7. Humidity Sensors Test
  • 8. Electrical Earth Leakage Test
  • 9. Flood Testing
  • 10. Water Spray Test
  • 11. Acoustic Leak Testing
  •  
    WATER LEAKAGE ACCURACY OF INVESTIGATION
     
  • 1. Two common sources of water seepage in buildings are from the external, e.g. rainfall, and from above or the alleged source sites, e.g. domestic use of water.
  • 2. The former is obvious and can readily be identified with certainty. The main difficulty is to identify the source/cause of water seepage coming from above (e.g. from the bathroom immediate above an alleged water seepage site).
  • 3. If the parties are cooperative, there is a good chance that the problem of water seepage can be alleviated by investigating/identifying the sources and carrying out proper repair. In majority of the cases, repeated repair will have to be carried out
  •  
    WATER LEAKAGE COMMON METHODS OF INVESTIGATION
     
  • Methodology 1: The alleged source site is first subjected to dyed water to simulate the water source(s). Afterwards, measurement of moisture is carried out in the alleged water seepage site. Typical examples include flooding test, water spray test and dye test. It is generally considered as the most direct means to identify/differentiate different water source(s). However, it is not applicable in majority of the cases due to non-corporation of owners/occupiers of the alleged source site thereby disallowing any flooding test, water spray test or dye test to be carried out from the alleged water seepage site.
  •  
  • Methodology 2: Without simulating the water source(s), measurement of moisture is carried out in the alleged water seepage site. Source(s) and cause(s) of water seepage are interpreted from the measurement and this requires high level of professional knowledge and expertise.
  •  
  • The commonly used techniques for investigating the causes and/or sources of water seepage.
  •  
    Common methods of investigating water seepage
     
  • 1. Dye test - Through thickness penetration
  • 2. Protimeter measurement - Limit to surface
  • 3. Infrared thermography - From surface to nominal depth
  • 4. Microwave moisture meter - Up to 110 mm or more
  •  
    1. Dye Test
     
  • Dye test is the most commonly used technique, inexpensive and requiring minimal technical skills. It is used by the Joint Office as the routine method for systematic investigation and is recommended as a DIY investigation tool (FEHD and BD). Dye test is carried out by ponding the alleged source site (e.g. flooding the bathroom) with dyed water (“the ponding area”). The result is positive if dye is visible from below. Recently, fluorescent dyes are used thereby signs of water seepage are observed from below by an ultraviolet light in dark condition. Quite often dye is not detected from below in the damp area (“negative results”) even though water originates from the ponding area.
  •  
    2. Protimeter Measurement
     
  • Protimeter is a device commonly used to assess the surface moisture content of a material. Surface moisture content is measured through pushing two needles/electrodes into the material. It enables rapid assessment of surface moisture content. Due to the heterogeneous properties of concrete and unknown properties of finishes on the surface of concrete, readings obtained from a protimeter cannot be taken directly as surface moisture content, unless the readings reflect very high moisture content. As precalibration of surface moisture content of concrete is virtually not possible, readings are taken from both affected areas and non-affected areas (or control points) and the values are compared to estimate the surface moisture content of affected areas
  •  
    3. Infrared thermography
     
  • Infrared thermography is based on the principle that wet and dry building components have different rates of heat gain and retention. This technique is normally applied using a hand-held infrared camera with recording device . Wet zone is identified based on physical characteristics of wet material with slower heat gain and heat loss. It may be able to display water paths, hidden water pipes, etc. that are close to the surface. As temperature differential can be very small (between 0.1C to 0.5C) for identifying a wet area, an uneven surface, e.g. spalling/delamination of finishes, may distort the temperature gradient making the thermographic images unreliable. this is usually the case in an affected area
  •  
    4. Microwave moisture meter
     
  • Microwave moisture meter has gained popularity in measuring the moisture content of a material. It is based on the propagation of electromagnetic waves in the material. Moisture content is estimated from the energy loss due to absorption of water. The device includes a generator and a receiver . It has the disadvantage of requiring a good contact surface for both generator and receiver which may not be possible to achieve in majority of the cases. It is also sensitive to heterogeneous nature of concrete that may cause error in the readings obtained from the measurement. As each measurement is presented as averaged moisture up to a certain depth, accuracy is also adversely affected by the presence of cavities, pipes or reinforcement embedded inside concrete.
  •  
  • Apart from dye test with the advantage of identifying water path(s) or source(s) of water seepage directly, the above are all interpretive testing methods. In some cases, microwave moisture measurement may also provide good indication of the water path(s) or source(s) of water seepage but this largely depends on the quality of the test data
  •  
  • Protimeter and infrared thermography can only identify the presence of moisture near the surface. As moisture measurements are indirectly assessed via electrical resistance and heat, respectively, foreign materials inside concrete may cause similar changes on the measurement to that of water. For instance, presence of salt may affect the reading and thus the accuracy of the measurement. Therefore, the data is used to compare the moisture condition between two different areas of the same material, namely control points not affected by water seepage and the affected areas.
  •  
  • Data obtained from the field works has suggested that there exists no universal method that can provide reliable results to identify the cause(s) of water seepage. Method of investigation has to be determined case by case based on the condition of concrete at the surface and in the interior
  •  
  • As indicated in the above, accuracy depends on the condition of the affected areas and how the tests are performed. Correct interpretation of the test results further relies on an understanding of the underlining principle; limitations; and the pros and cons of applying different methods of investigations. We are of the view that there is in lack of an expertise or a unify approach to select the proper tests; to perform the tests and/or to interpret the results. Obviously, it is very difficult if not impossible task for the parties, who are laymen to the tests, to select the tests; to perform the tests and/or to interpret the results, save and except dye test. A performance-based approach is proposed to handle water seepage in buildings.
  •  
    CONCLUSIONS
     
  • Pursuant to reported cases and relevant provisions in the ordinances, the standard of investigation is to be one with high degree of certainty and the investigation so conducted is able to distinguish all possible causes of water seepage. Common difficulties in resolving water seepage disputes are due to (a) inability to identify the source(s)/cause(s) of water seepage and (b) non-corporation of owners/occupiers of premises alleged of causing water seepage. In respect of (a), it depends on the condition of the affected areas; how the tests are performed; and correct interpretation of the test results. It is necessary to improve and/or develop methods of investigating water seepage. As an alternative approach, it is suggested to identify the source(s) of water seepage from moisture readings obtained from alleged water seepage sites and vibration readings obtained from exposed waste pipes without entering the alleged source sites. Further, it is desirable to shift the method of investigation from an informative approach to a consultative approach with interaction by the party/parties. We need to dedicate tools to match the accuracy/reliability of methods of investigation with the goals of the parties and the goals of the investigation and to provide the parties with opportunities to decide how they would like to proceed. By following a performance-based approach, it is possible to reduce the overall cost and time by not carrying out unnecessary and/or unreliable tests. This may ultimately assist the public to resolve the problem of water seepage in buildings.
  •  
    Water Seepage Investigation List
     
    Water Seepage Problem investigation , Leak & Water Seepage testing in cyprus , Dampness, Seepage and Water Leakage Inspection in cyprus , Dampness, Seepage and Water Leakage detection in cyprus , Detecting Leakage , water leakage testing in cyprus , Seepage testing Source in cyprus , Residential Building seepage tesing in cyprus , Seepage testing using Fluoride , Seepage on Walls testing in cyprus , Dampness on Walls tesing in cyprus , Preventing Dampness in cyprus , Preventing Dampness Types of Waterproofing Material , Effects of Dampness detection in cyprus , Causes of Dampness detection in cyprus , Seepage or Dampness on Walls , Seepage Inspections , Leak detection and location in cyprus , Leak detection testing in cyprus , Leak detection in cyprus , Leak detection problem inspection , Water Testing and Leakage inspection , Dampness, Seepage and Water Leakage Inspection In cyprus , dampness testing in cyprus , seepage testing in cyprus , water leakage testing in cyprus , leak testing in cyprus , Hydrostatic & Diagnostic Pressure Testing and Pipe Leak , Basements Dampness Seepage and Water Leakage testing in cyprus , Escalators Dampness Seepage and Water Leakage testing in cyprus , Electrical rooms Dampness Seepage and Water Leakage testing in cyprus , Electrical Transformers Dampness Seepage and Water Leakage testing in cyprus , DG sets Dampness Seepage and Water Leakage testing in cyprus , Water treatment plant Dampness Seepage and Water Leakage testing in cyprus , Sewage treatment plant Dampness Seepage and Water Leakage testing in cyprus , Sumps & Pumping plant Dampness Seepage and Water Leakage testing in cyprus , Rain water harvesting system Dampness Seepage and Water Leakage testing in cyprus , Firefighting systems Dampness Seepage and Water Leakage testing in cyprus , Lobbies Dampness Seepage and Water Leakage testing in cyprus , Water treatment plant Dampness Seepage and Water Leakage testing in cyprus , Sewage treatment plant Dampness Seepage and Water Leakage testing in cyprus , Sumps & Pumping plant Dampness Seepage and Water Leakage testing in cyprus , Rain water harvesting system Plant Dampness Seepage and Water Leakage testing in cyprus , Corridors Dampness Seepage and Water Leakage testing in cyprus , Parking Dampness Seepage and Water Leakage testing in cyprus , Podium Dampness Seepage and Water Leakage testing in cyprus , Overhead water tanks Dampness Seepage and Water Leakage testing in cyprus , Helipad Dampness Seepage and Water Leakage testing in cyprus , Roads and pathways Dampness Seepage and Water Leakage testing in cyprus , Staircases Dampness Seepage and Water Leakage testing in cyprus , Basement ventilation and exhaust systems Dampness Seepage and Water Leakage testing in cyprus , Dampness & damages in all common areas Dampness Seepage and Water Leakage testing in cyprus , Painting work Dampness Seepage and Water Leakage testing in cyprus , Shafts and ducts which are open for inspection Dampness Seepage and Water Leakage testing in cyprus ...
     
    civil ndt and mechanical ndt - non destructive testing in cyprus list
     
    civil ndt testing - non-destructive testing in cyprus , concrete for bridges testing in cyprus , dams civil testing in cyprus ,, building civil ndt in cyprus , subway civil testing in cyprus , tunnel civil ndt in cyprus , ultrasonic pulse velocity testing in cyprus , rebound hammer testing in cyprus , rebar locator in cyprus , depth of concrete in cyprus , half cell potential testing in cyprus , carbonation testing in cyprus , pile integrity testing in cyprus , visual inspection and field in cyprus , civil ndt - concrete testing in cyprus , ultrasonic pulse velocity testing in cyprus , rebound hammer testing in cyprus , rebar locator in cyprus , depth of concrete in cyprus , half cell potential testing in cyprus , carbonation testing in cyprus , pile integrity testing in cyprus , visual inspection and field in cyprus , in-situ compressive strength testing in cyprus , civil design strength in cyprus , civil existing structures in cyprus , construction materials testing in cyprus , pile testing systems in cyprus , structural monitoring systems in cyprus , asphalt testing systems in cyprus , pavement testing in cyprus , rock and soil laboratory test systems in cyprus , non-destructive tests for concrete in cyprus , geotechnical & vibration monitoring systems in cyprus , pavement condition monitoring in cyprus , concrete and cement lab systems in cyprus , civil lab testing concrete and concreting material analysis , civil laboratory testing in cyprus , construction material testing in cyprus , cement testing in cyprus , aggregate testing in cyprus , bricks testing in cyprus , blocks testing in cyprus , tension test on rebars testing in cyprus , chemical test on rebars testing in cyprus , water analysis in cyprus , cube test in cyprus , accelerated cube test (act) in cyprus , rapid chloride test (rcpt) in cyprus , concrete mix design in cyprus , fly ash in cyprus , slag and silica fume in cyprus , self compacting concrete in cyprus , temperature controlled concrete in cyprus , civil ndt and concrete testing in cyprus , civil ndt investigation in cyprus , concrete investigation in cyprus , coating thickness measurement on concrete structures in cyprus , compressive strength testing in cyprus , concrete mix design in cyprus , bitumen mix design in cyprus , core extraction testing in cyprus , core sampling testing in cyprus , concrete core testing in cyprus , concrete cube testing in cyprus , chemical analysis in cyprus , electrical resistivity testing in cyprus , ground penetrating radar survey in cyprus , sieve analysis in cyprus , ultrasonic low frequency testing in cyprus , upv testing in cyprus , vibration analysis of building in cyprus , leak testing in cyprus , ct scan on conctete in cyprus , element analysis on concrete in cyprus , impact echo testing in cyprus , linear polarization testing in cyprus , load testing in cyprus , permeability testing in cyprus , petrography of concrete in cyprus , pullout testing in cyprus , cut and pullout testing (cpo test) in cyprus , impulse response test in cyprus , impact echo test in cyprus , ground penetrating radar (gpr) in cyprus , crack depth measurement in cyprus , reinforcement location and corrosion assessments in cyprus , reinforcement location by ground penetrating radar (gpr) in cyprus , cover assessment in cyprus , half cell potential tests in cyprus , resistivity tests in cyprus , corrosion rate assessment in cyprus , carbonation test in cyprus , repair quality assessment in cyprus , bond test in cyprus , anchor rebar pull out strength in cyprus , chemical testing in cyprus , ultrasonic testing in cyprus , radiographic testing in cyprus , magnetic particle testing in cyprus , penetrant testing in cyprus , eddy current testing in cyprus , visual testing in cyprus , ultrasonic thickness measurement testing in cyprus , vibration analysis in cyprus , time of flight diffraction (tofd) in cyprus , phased array ultrasonic testing (paut) in cyprus , ndt testing in cyprus , non destructive testing in cyprus , ndt in cyprus , ultrasonic testing in cyprus , magnetic particle testing in cyprus , dye penetrant testing in cyprus , radiographic testing in cyprus , eddy current testing in cyprus , vibration analysis in cyprus , paut – toft in cyprus , ultrasonic thickness gauging testing in cyprus , helium leak detection in cyprus , rfet / nfet / pect testing in cyprus , internal rotary inspection system (iris) in cyprus , acoustic pulse reflectometry (apr) in cyprus , positive material identification testing in cyprus , magnetic flux leakage (mfl) testing in cyprus , acoustic emission testing in cyprus , flouresent leak detection in cyprus , long range ultrasonic testing - lrut in cyprus , thermography inspection in cyprus , leak testing in cyprus , tky joints ultrasonic testing in cyprus , aws d1.1 structural steel ultrasonic testing in cyprus , ndt capabilities for mechanical and civil in cyprus , ultrasonic inspection in cyprus , time of flight diffraction (tofd) and phased array ut in cyprus , magnetic particle testing in cyprus , dye penetrant testing in cyprus , radiographic testing in cyprus , eddy current testing in cyprus , weld ability study in cyprus , visual inspection and field in cyprus ...
     
    list of our services following cities
     
    limassol | strovolos | larnaca | famagusta | lakatamia | kyrenia | paphos | kato polemidhia | aglandjia | achna | agia marina | agia marinouda | agia trias | agia varvara | agioi trimithias | agios sozomenos | aglandjia | agros | akaki | akanthou | akrotiri | amargeti | amathous | anarita | apostolos andreas | argaki | arminou | athienou | asha | asinou | askas | astromeritis | ayia napa | ayios dhometios | bellapais | buffavento | chirokitia | chloraka | dali | dasaki tis achnas | deryneia | dhekelia | dhrousha | episkopi | ergates | evrychou | fyti | galata | gerakies | geri | gerolakkos | geroskipou | gialousa | giolou | idalium | inia | kaimakli | kakopetria | kalavasos | kalo chorio | kalopanagiotis | kampia | kampos | kantou | kapedes | kato deftera | kato lefkara | kato zodeia | kellia | kelokedara | kissonerga | kiti | kofinou | koilani | kokkina | kormakitis | kornokipos | kornos | kouklia | kyperounta | kythrea | lagoudera | lambousa | lapithos | latsia | lefka | lefkoniko | leonarisso | limnitis | louroujina | lythrangomi | lythrodontas | lysi | malounta | mammari | mandria, limassol | mandria, paphos | margo | maroni | mathiatis | melini | meniko | mia milia | milia | miliou | morphou | moutoullas | mylikouri | nata | oikos | omorphita | ormideia | oroklini | orounta | pachna | palaichori morphou | palaichori oreinis | panagia | pano deftera | pano zodeia | pano lefkara | paralimni | pedoulas | pegeia | pera chorio | pera orinis | pera pedi | peristerona | peristeronopigi | pissouri | platanistasa | platres | polis | politiko | polystypos | pomos | potamos tou kampou | protaras | psimolofou | pyla | pyrgos | rizokarpaso | silikou | sotira, famagusta | sotira, limassol | strovolos | templos | trikomo | troulloi | tsakistra | tseri | tymbou | varosha | vasilikos | vavla | vouni | vretsia | vrysoulles | xeros | xylofagou | xylotymbou | zygi ....