AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

NACE TRAINING
 
 
 
 
NACE PREPARATORY TRAINING
 
NACE CIP – 1 National Association of Corrosion Engineers
 
The NACE Coating Inspector Programme has set the standard for inspections in the protective coatings industry and is the worlds most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. NACE has recently enhanced the CIP learning experience with more hands-on time with new inspection methods and equipment, better graphic and video presentation as well as additional emphasis on international standards.


NACE CIP – 2 National Association of Corrosion Engineers

The NACE Coating Inspector Programme has set the standard for inspections in the protective coatings industry and is the worlds most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. NACE has recently enhanced the CIP learning experience with more hands-on time with new inspection methods and equipment, better graphic and video presentation as well as additional emphasis on international standards.
 
NACE TRAINING SYLLABUS
 
CIP Level 1 Course Outline
 
  • Introductions, Welcome, Overview
  • Corrosion and Corrosion Control
  • Coatings Introduction
  • Coatings & the Inspector
  • Coating Specification
  • Environmental Test Instruments
  • Inspection Procedures
  • Practice Piece Specification
  • Documentation
  • Pre-job Conference
  • Surface Preparation Overview
  • Instruments Practice Lab
  • Surface Preparation
  • Coating Application by Brush, Roller and Mitt
  • Coating Application by Conventional Spray
  • Coating Application by Airless Spray
  • Nondestructive Test Instruments
  • Surface Preparation
  • Material Safety Data Sheets & Technical Datasheets
  • Panel Inspection
  • Coatings Technology
  •  
    CIP Level 2 Course Outline
     
  • Introduction Team Formation
  • Advanced Corrosion
  • Environmental Controls
  • Advanced Environmental Testing Instrumentation
  • Advanced Environmental Testing Instrumentation -Practice
  • Centrifugal Blast Cleaning
  • Water jetting
  • Interpersonal Relationship Dynamic in the Workplace
  • Safety Awareness
  • Advanced Nondestructive Test Instruments
  • Advanced Nondestructive Test Instruments - Practice
  • Linings and Special Coatings
  • Thick Barrier Linings
  • Advanced Standards and Resources
  • Coating Concrete and Inspection
  • Test Instruments for Coating Concrete
  • Test Instruments for Coating Concrete - Practice
  • Pipeline Mainline and Field Joint Coatings
  • Destructive Instruments and Tests
  • Surface Preparation, Coating and Inspection of Special Substrates
  • Maintenance Coating Operations
  • Non Liquid Coatings
  • Coating Surveys
  • Specialized Tests and Test Equipment
  • Coating Types, Failure Modes, and Inspection Criteria
  •  
    BGAS TRAINING
     
     
    BGAS PREPARATORY TRAINING
     
  • This course will cover corrosion, specified coating conditions, surface preparation methods and standards, surface contaminants and tests for detection. You will also learn about coating technology, film thickness, coal tar enamels, special situations, hot applied tapes, cold applied laminate tapes, grease based tapes, and self-adhesive overwrap tapes.
  •  
  • You will also be taught about polyethylene cladding, fillers, mastics and putties, heat shrinkable plastics, powder coatings, urethane MCLs, holiday detection, concrete coatings, and internal coatings. The course also offers information on cathodic protection, stages of pipeline construction, handling, transport and storage, pipeline surveys, health and safety, coating faults, and working practices and quality.
  •  
  • BGAS-CSWIP Painting Inspector - Grade 2
  • BGAS SITE COATING INSPECTOR
  • Painting Inspector Grade 1
  • Painting Inspector Grade 2
  • Painting Supervisor Level 4
  •  

    BGAS PAINTING INSPECTOR GRADE 3/2

     

    Suitable for:

     
    Candidates with or without experience in the Painting Inspection Industry. Candidates will be assessed during the course and advised on either grade 3 or 2 exam route dependent on their progress during training.
     

    Course Content:

     
    Corrosion theory; surface preparation; surface contaminants and tests; paint constituents and technology; solutions and dispersions; drying and curing properties and performance; specified painting conditions; cathodic protection; holiday/pinhole detection; paint-application methods; paint/paint film testing; paint identification; metal coatings; paint faults; colour; inspection methods; specification requirements; health and safety and working practices.
     

    Course Objectives:

     
     
  • To recognise and identify the benefits/disadvantages of paint systems

  • To understand the importance of surface preparation

  • To understand methods of application and testing

  • To understand paint system inspections

  • To interpret requirements of standards

  • To meet the syllabus requirements for the BGAS-CSWIP Painting Inspector Examination.
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs.

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Site Coatings Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on this day (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examination on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
    No formal entry qualifications required, but a knowledge of dry abrasive blast cleaning or industrial paint application techniques would be advantageous
     

    BGAS SITE COATING INSPECTOR

     

    Suitable for:

     
  • Candidates with or without previous experience in site coatings inspection wishing to attain BGAS-CSWIP Approval as a Site Coatings Inspector.

    Suitable for individuals engaged in the inspection and coating of new and existing pipelines. This approval is very useful to welding inspectors as it can extend their working time capability on pipelines projects.
  •  

    Course Content:

     
    Corrosion, specified coating conditions; surface preparation methods and standards; surface contaminants and tests for detection; coating technology; film thickness; coal tar enamels; special situations; hot applied tapes; cold applied laminate tapes; grease based tapes; self-adhesive overwrap tapes; polyethylene cladding; fillers, mastics and putties; heat shrinkable plastics; powder coatings; urethane MCLs; holiday detection; concrete coatings; internal coatings; cathodic protection; stages of pipeline construction; handling, transport and storage; pipeline surveys, health and safety; coating faults; working practices and quality.
     

    Course Objectives:

     
     

    AWS Course Contents :

     
  • To understand the principles of pipeline coatings
  • To understand the importance of surface preparation
  • To appreciate the difficulties associated with pipeline site coating
  • To understand the practical methods of testing and inspection
  • To interpret the requirements of standards
  • To meet the syllabus requirements for the BGAS-CSWIP Site Coatings Inspector examination
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Paint Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on these days (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examinations on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
  • No formal entry qualifications required, but a knowledge of pipeline fabrication techniques, safe working practices, and a general understanding of coating application would be advantageous.
  •  
    List of welding courses
     
    nace training in cuba , nace painting coating inspector training in cuba , nace coating inspector training in cuba , National Association of Corrosion Engineers training in cuba , nace certification course in cuba , bgas training in cuba , bgas painting inspector training in cuba , bgas course in cuba , cswip training in cuba , cswip welding inspector training in cuba , cswip course in cuba , aws training in cuba , American Welding Society training in cuba , aws cwi training in cuba , aws welding training in cuba , American Welding Society course in cuba , arc welding training in cuba , Flux-Cored Arc Welding (FCAW) training in cuba , tig welding training in cuba , TIG – Gas Tungsten Arc Welding (GTAW) training in cuba , mig welding training in cuba , MIG Gas Metal Arc Welding (GMAW) training in cuba , Stick Shielded Metal Arc Welding (SMAW) training in cuba , Laser Beam Welding training in cuba , Electron-Beam Welding training in cuba Plasma Arc Welding training in cuba , Atomic Hydrogen Welding training in cuba , Electroslag welding training in cuba , fcam welding training in cuba , gtaw welding training in cuba , gmaw welding training in cuba , smaw welding training in cuba , aluminium welding training in cuba , al welding training in cuba , ss welding training in cuba , stainless steel welding training in cuba ...
     
    list of our services following cities
     
    havana | santiago de cuba | camagüey | holguín | guantánamo | santa clara | las tunas | bayamo | cienfuegos | pinar del río | matanzas | ciego de ávila | sancti spíritus | manzanillo | cárdenas | palma soriano | moa | florida | morón | nueva gerona | contramaestre | colón | artemisa | güines | sagua la grande | trinidad | placetas | baracoa | nuevitas | banes | san luis | san josé de las lajas | caibarién | san antonio de los baños | puerto padre | jagüey grande | cabaiguán | mayarí | vertientes | varadero | consolación del sur | amancio | san cristóbal | güira de melena | san germán | cumanayagua | sagua de tánamo | guanajay | jatibonico | manicaragua | camajuaní | colombia | sandino | jovellanos | niquero | la maya | bauta | jiguaní | guisa | nicaro-levisa | havana | santiago de cuba | camagüey | holguín | guantánamo | villa clara | las tunas | granma | cienfuegos | pinar del río | matanzas | ciego de ávila | sancti spíritus | granma | matanzas | santiago de cuba | holguín | camagüey | ciego de ávila | isla de la juventud | santiago de cuba | matanzas | artemisa | mayabeque | villa clara | sancti spíritus | villa clara | guantánamo | camagüey | holguín | santiago de cuba | mayabeque | villa clara | artemisa | las tunas | matanzas | sancti spíritus | holguín | camagüey | matanzas | pinar del río | las tunas | artemisa | artemisa | holguín | cienfuegos | holguín | artemisa | sancti spíritus | villa clara | villa clara | las tunas | pinar del río | matanzas | granma | santiago de cuba | artemisa | granma | granma | holguín | havana | santiago de cuba | camaguey | holguin | guantanamo | santa clara | diez de octubre | arroyo naranjo | las tunas | bayamo | boyeros | pinar del rio | cienfuegos | habana del este | san miguel del padron | centro habana | matanzas | ciego de avila | cerro | manzanillo | sancti spiritus | guanabacoa | palma soriano | alamar | cardenas | la habana vieja | moa | puerto padre | contramaestre | guira de melena | consolacion del sur | gueines | artemisa | san luis | moron | colon | florida | sagua la grande | trinidad | san cristobal | placetas | san jose de las lajas | jaguey grande | nuevitas | banes | bartolome maso | corralillo | jesus menendez | jobabo | baracoa | jovellanos | bauta | santo domingo | cabaiguan | regla | san german | ranchuelo | san antonio de los banos | cacocum | yaguajay | manicaragua | amancio | jiguani | cifuentes | guaimaro | caibarien | cumanayagua | condado | camajuani | santiago de las vegas | santa cruz del sur | minas de matahambre | remedios | madruga | union de reyes | vertientes | ciro redondo | mariel | yara | la salud | maisi | gibara | vinales | pedro betancourt | cueto | encrucijada | rio guayabal de yateras | los palacios | limonar | guanajay | campechuela | cruces | chambas | perico | rio cauto | aguada de pasajeros | calimete | palmira | lajas | jimaguayu | cauto cristo | minas | esmeralda | nueva gerona | jaruco | colombia | varadero | fomento | bahia honda | florencia | jatibonico | rodas | niquero | guisa | santa cruz del norte | sagua de tanamo | bejucal | primero de enero | jobabo | la sierpe | sibanicu | media luna | abreus | venezuela | guane | alquizar | baragua | guayos | jamaica | san nicolas de bari | batabano | marti | manati | quivican | quemado de guines | candelaria | los arabos | mantua | esperanza | calabazar de sagua | topes de collantes | zaza del medio | soroa | bolondron | san luis | cabanas | alacranes ....