AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

PAINT TESTING
 
 
 
 
PAINT TESTING LAB - Synthetic Enamel as per IS 2932 & IS 8662, Redemixed paint, Epoxy Paint, PU Paint.
 
  • 1. Accelarated Storage Stability
  • 2. Resistance to Acid Test
  • 3. Resistance to Alkali Test
  • 4. Free from Cu + mn
  • 5. Viscosity by Ford Cup No.4
  • 6. Drying Time
  • 7. Consistency
  • 8. Finish
  • 9. Fineness of Grind
  • 10. Colour
  • 11. Mass in Kg/10 ltrs
  • 12. Gloss @ 60°
  • 13. Water Content
  • 14. Flexibility Test
  • 15. Adhesion Test
  •  
    PAINT TESTING PARAMETERS
     
  • • Alkali Resistance of Paint
  • • Cass Test
  • • Chemical Resistance
  • • Chip Resistance
  • • Coating Hardness
  • • Coating Surface Roughness /Profile
  • • Coating Thickness
  • • Condensing Humidity
  • • Crosshatch Adherence
  • • Drying Time
  • • Failure Analysis
  • • Falling Weight
  • • Flexibility
  • • Free Falling Sand Abrasion
  • • FTIR
  • • Gloss (60deg.C)
  • • Hardness
  • • Impact resistance
  • • Moisture Content
  • • Peel
  • • Penetration Resistance
  • • Salt Spray
  •  
    PAINT AND COATING TESTING
     
    Abrasion Resistance Test
     
    This test helps in determining the ability of a coating to resist degradation due to mechanical wear and tear by hard and rough objects. Abrasion resistance can be intensified by the inclusion of surface changing additives.
     
    Adhesion Test
     
    Adhesion testing in the paint and coating industries is necessary to ensure the paint or coating will adhere properly to the surface to which they are applied Test Method: IS: 101 (P-5) (SEC-2)1988
     
    Alkali Resistance of Paint
     
    This test helps in determining the degree to which a paint resists reaction with alkaline materials such as lime, cement, plaster, soap, etc. This is an important property for paints applied in bathrooms, kitchens and laundries. Test Method: IS: 427-2005, IS: 428-2006
     
    Cass Test
     
    This test helps in determining the corrosive performance of decorative copper/nickel/chromium or nickel/chromium coatings on steel, zinc alloys, aluminium alloys, and plastics designed for severe service and testing of anodized aluminium.
     
    Chemical Resistance Test
     
    This test helps in determining the ability of a coat to resist chemical deterioration or staining. Test Method: IS: 13630 (P-8) 2006, EN 105-106
     
    Chip Resistance Test
     
    This test helps in determining the resistance of surface coatings (paint, clear coats, metallic plating, etc.) to chipping caused by the impacts of gravel or other flying objects.
     
    Coating Hardness Test
     
    This test helps in determining the hardness of the paint coat. Test Method: IS: 101 (P-5) (SEC-1)1988
     
    Coating Surface Roughness and Profile test
     
    The proper and effective preparation of a surface prior to coating makes sure that the correct roughness or profile is generated. The adhesion to the coating of the surface can be reduced if the profile is too low. If the profile is too high, there is the danger that the profile peaks will remain uncoated.
     
    Coating Thickness Test
     
    This test helps in determining the thickness of paint plating, coatings and galvanization on iron steel.
     
    Test Method: IS: 6745-1972
     
    Condensing Humidity Test
     
    This test helps in determining the resistance of organic coatings by controlled condensation. Condensation is produced by exposing the test surface of the sample to a heated, saturated mixture of air and water vapour, while the reverse side of the sample is cooled under an air of room temperature air. Test Method: IS: 101 (P-6) (SEC-1)1988
     
    Crosshatch Adherence Test
     
    This test helps in determining the adhesion of a large variety of coatings.
     
    Cyclic Corrosion Test
     
    This test helps in determining the corrosion degradation of coating systems for steel bridges.
     
    Drying Time Test
     
    This test is done to know the timeline, when a coating is totally dry. When developing a process, it is crucial to know the definite time it would take for the coating to dry or cure. The coating’s drying time involves multiple stages. The first stage is when the coating levels off under gravity. Once it starts to cure, a thin dry film appears on the surface. The coating then continues to dry until the coating is totally cured. Test Method: IS: 101 (P-3) (SEC-4)1986
     
    Failure Analysis Test
     
    This test helps in determining when, where, and how the paint or coating failure can occur.
     
    Falling Weight Test
     
    The ability of a pipe coating to avoid mechanical damage during handling, shipping, and installation depends on its impact resistance. This test method provides a systematic means for screening coating materials aligned to this property.
     
    Flexibility Test
     
    This test helps in determining the ability of a coating system to withstand the stresses of fabrication. Organic coatings on the precoated sheet are subjected to stresses when fabricated into products by roll forming, brake bending, or other deformation processes. These stresses can exceed the flexibility or adhesive strength of the coating, resulting in fracture of the coating which exposes the surface, or in the loss of adhesion of the coating on the surface.
     
    Free Falling Sand Abrasion Test
     
    The abrasive is allowed to fall from a specified height through a guide tube onto the coated panel until the substrate becomes visible. The amount of abrasive per unit film thickness is reported as the abrasion resistance of the coating on the panel. Both silicon carbide or silica sand can be used. Test Method: ASTM D968
     
    FTIR Test
     
    Fourier-Transform Infrared Spectroscopy (FTIR), can serve as an important first-line analysis tool for the identification of coating types and drying mechanisms via monitoring of the functional groups on the chemical compounds inherent in the formulation.
     
    Gloss (60C) Test
     
    Gloss measurement is an essential instrument where a cosmetic appearance of the coat finish is required. It measures a guide to control and test right from matte to mirror finish accurately. A multi-directional beam of light at a specific angle to the test surface and measuring the amount of reflection is used to determine gloss. For general gloss measurement, the 60Å angle is recommended. Test Method: IS: 13607-1992, IS: 5691-1970
     
    Hardness Test
     
    This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of pencil leads of known hardness. This test covers the determination of the indentation hardness of organic materials such as dried paint, varnish and lacquer coatings, when applied to an acceptable plane rigid surface, for example, metal or glass. Test Method: ASTM D3363 / ASTM D1474
     
    Impact Resistance Test
     
    Impact performance after painting can be tested with a puncture test or a falling dart test. Test Method: IS: 101 (P-5) (SEC-3)1999
     
    Peel-Off Test
     
    This test is used to measure resistance to cracking (flexibility) and adhesion of attached organic coatings on substrates of sheet metal or rubber-type materials.
     
    Penetration Resistance Test
     
    The penetration resistance is of special importance to architectural finishes. The ability to maintain a consistent appearance (colour and gloss) on substrates with varying porosity can be checked by applying the paint over a coated and uncoated area of the test chart. Thus, the penetration resistance is tested under extreme conditions. The penetration resistance is visually evaluated and can also be objectively evaluated by measuring colour and gloss.
     
    Salt Spray Test
     
    The salt spray test is a standardized test method used to check corrosion resistance of coated samples. Test Method: IS: 2074-1992, IS: 13183-1991, IS: 13607-1992
     
    Scratch Resistance Test
     
    The scratch resistance can be established e.g. in the Taber abrasion test, where the amount of haze is established after a number of abrasive cycles. Scratch resistance can also be measured by measuring the weight loss after a number of sanding cycles. The pen test determines the indentation caused by a sharp pencil scratched on the surface with a defined force. Test Method: ISO 1518
     
    Scrubbing Resistance Test
     
    This test helps in determining the resistance of paints to erosion caused by scrubbing. Although scrub resistance tests are intended primarily for interior coatings, they are sometimes used for exterior coatings as an additional measure of film performance.
     
    Scratch Tester
     
    One of the most important properties of a thin film coating is the adhesion between the coating and the substrate. Scratch Tester is the most common method of accurate measurement of thin-film coating adhesion.
     
    XENON Arc Test
     
    This test helps in determining the ability of a paint or coating to resist deterioration of its physical and optical properties caused by exposure to light, heat, water and can be very important for many applications. This practice may induce property changes associated with end-use conditions, including the effects of sunlight, moisture, and heat. The exposure used in this practice is not intended to simulate the deterioration caused by localized weather phenomena such as atmospheric pollution, biological attack, and saltwater exposure. Test Method: ASTM D6695 – 08
     
    Volatile Content Test
     
    This test helps in determining the weight per cent volatile content of solvent-reducible and water-reducible coatings. Test Method: ASTM D2369, IS: 101 (P-2) (SEC-2)1986
     
    Water Resistance Test
     
    Water can cause the degradation of coatings, so knowledge of how a coating resists water is helpful for assessing how it will perform in actual service. Test Method: IS: 101 (P7SC-1)1989, IS: 13183-1991, IS: 5691-1970
     
     
    PLASTIC TESTING
     
  • Plastic Composition Testing lab, plastic analysis, plastic products testing lab, Plastic product failure analysis, Plastic identification lab, Plastic testing services, Plastic grade identification lab, Plastic tensile testing services , Plastic product testing services, Plastic Testing Laboratory
  •  
    Physical and Mechanical properties of Plastic Testing Lab
     
  • • Plastic identification testing
  • • Flammability testing
  • • Length of flame testing
  • • Heat cycle resistance testing
  • • Heat aging testing
  • • Chemical resistance testing
  • • Impact resistance testing
  • • Water resistance Odour testing
  • • Fading resistance testing
  • • Weather ability testing
  • • Suction testing
  • • Falling ball testing
  • • Wear resistance testing
  •  
    Types of Plastics Testing Offered:
     
  • • ABS Plastic Testing Lab
  • • Polypropylene Testing
  • • Polyethylene Testing
  • • PVC Testing lab
  • • Nylon 6-6 Testing lab
  • • PTFE Testing Services
  • • PET Testing Services
  • • ABS/PC alloys Plastic Testing Lab
  • • Acetal Plastic Testing Lab
  • • Acrylic Testing Lab
  • • Acrylic-styrene copolymer
  • • Acrylonitrile
  • • Cellulose Acetate
  • • Cellulose Acetate Butanal
  • • Cellulose Acetate Propionate
  • • Chlorinated polyethylene
  • • Epoxy resins
  • • Ethylene vinyl alcohol
  • • Fluoroplastic – PTFE
  • • Fluoroplastic – FEP
  • • Fluoroplastic – PVDF
  • • Ionomer
  • • Polyacrylether ketone
  • • Polyetheether ketone
  • • Liquid Crystal Polymer
  • • Melamine formaldehyde
  • • Phenolics
  • • Nylon 6
  • • Nylon 6/6
  • • Nylon 6/10
  • • Nylon 6/12
  • • Nylon 4/6
  • • Nylon 11
  • • Nylon 12
  • • Aromatic polyamide
  • • Polyamide-Polyimide
  • • Polyethylene and copolymers
  • • Polycarbonate
  • • Polybutylene Terephthalate
  • • Polycyclohexene dimethanol terephthalate
  • • PET: Polyethylene terephthalate
  • • PET/ PC blends
  • • Polyetherimide
  • • Polyethersulfone
  • • Polyimide
  • • Polymethylpentene
  • • Polyphenylene oxide
  • • Polyphenylene sulfide
  • • Polyphthalamide
  • • Polypropylene and copolymers
  • • Polystyrene and copolymers
  • • Polyurethanes
  • • Polyvinylidene chloride
  • • Silicones
  • • Polysulfones
  • • Polyethersulfones
  • • Polyureas
  • • PVC: Polyvinyl chloride
  • • Polyvinylchloride (chlorinated)
  •  
    Types of Plastics Testing Lab
     
  • • Polyarylate plastic testing lab
  • • Polyurethane (PUR) plastic testing lab
  • • Acrylonitrile Ethylene Styrene (AES) plastic testing lab
  • • Polyaryletherketone (PAEK) plastic testing lab
  • • Polyethylene (PE) plastic testing lab
  • • Thermoplastic Elastomer (TPE) plastic testing lab
  • • Polyurethane Thermoset Elastomer (TSU) plastic testing lab
  • • Acrylonitrile Styrene (AS) plastic testing alab
  • • Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
  • • Polybutadiene Rubber (PBR) plastic testing lab
  • • SiliconeAlphamethylstyrene (AMS) plastic testing lab
  • • Polycaprolactone (PCL) plastic testing lab
  • • Styrene Acrylonitrile (SAN) plastic testing lab
  • • Biodegradable Polymers plastic testing lab
  • • Styrene Acrylonitrile Silicone (SAS) plastic testing lab
  • • Cellulose Acetate (CA) plastic testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
  • • Diallyl Phthalate (DAP) plastic testing lab
  • • Polyether Imide (PEI) plastic testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
  • • Dicyclopentadiene (DCPD) plastic testing lab
  • • Epoxy plastic testing and analysis lab
  • • Polyethylene Naphthalate (PEN) plastic testing lab
  • • Thermoplastic Polyurethane (TPU) plastic testing lab
  • • Fluoropolymer plastic testing lab
  • • Polyimide (PI) plastic testing lab
  • • FuranPolylactic Acid (PLA) plastic testing lab
  • • Thermoset (TS) plastic testing lab
  • • Ionomer plastic testing lab
  • • Polymethylpentene (PMP) plastic testing lab
  • • Thermoset Elastomer (TSE) plastic testing lab
  • • Polyphenylene Ether (PPE) plastic testing lab
  • • Vinyl Alcohol (VOH) plastic testing lab
  • • Methyl Cellulose (MC) plastic testing lab
  • • Polyphenylene Sulfide (PPS) plastic testing lab
  • • Methyl Methacrylate (MM) plastic testing lab
  •  
    POLYMER PRODUCTS TESTING LAB
     
  • • Polyarylate polymer testing lab
  • • Polyurethane (PUR) polymer testing lab
  • • Acrylonitrile Ethylene Styrene (AES) polymer testing lab
  • • Polyaryletherketone (PAEK) polymer testing lab
  • • Polyethylene (PE) polymer testing lab
  • • Thermopolymer Elastomer (TPE) polymer testing lab
  • • Polyurethane Thermoset Elastomer (TSU) polymer testing lab
  • • Acrylonitrile Styrene (AS) polymer testing lab
  • • Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
  • • Polybutadiene Rubber (PBR) polymer testing lab
  • • SiliconeAlphamethylstyrene (AMS) polymer testing lab
  • • Polycaprolactone (PCL) polymer testing lab
  • • Styrene Acrylonitrile (SAN) polymer testing lab
  • • Biodegradable Polymers polymer testing lab
  • • Styrene Acrylonitrile Silicone (SAS) polymer testing lab
  • • Cellulose Acetate (CA) polymer testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
  • • Diallyl Phthalate (DAP) polymer testing lab
  • • Polyether Imide (PEI) polymer testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
  • • Dicyclopentadiene (DCPD) polymer testing lab
  • • Epoxy polymer testing lab
  • • Polyethylene Naphthalate (PEN) polymer testing lab
  • • Thermopolymer Polyurethane (TPU) polymer testing lab
  • • Fluoropolymer polymer testing lab
  • • Polyimide (PI) polymer testing lab
  • • FuranPolylactic Acid (PLA) polymer testing lab
  • • Thermoset (TS) polymer testing lab
  • • Ionomer polymer testing lab
  • • Polymethylpentene (PMP) polymer testing lab
  • • Thermoset Elastomer (TSE) polymer testing lab
  • • Polyphenylene Ether (PPE) polymer testing lab
  • • Vinyl Alcohol (VOH) polymer testing lab
  • • Methyl Cellulose (MC) polymer testing lab
  • • Polyphenylene Sulfide (PPS) polymer testing lab
  • • Methyl Methacrylate (MM) polymer testing lab
  • • Polymer product testing lab
  • • Polymer failure analysis lab
  • • Polymer reverse engineering lab
  • • Polymer analytical testing lab
  • • Mechanical testing of polymer lab
  • • polymers product testing lab
  • • Tensile testing of polymer lab
  • • Compression testing lab
  • • Bend testing O polymer lab
  • • Chemical analysis of polymer lab
  • • Physical testing of polymer lab
  • • FTIR analysis of polymer lab
  • • Polymer testing laboratory services
  • • Thermal analysis of polymer lab
  • • DSC Analysis of polymer lab
  • • Failure analysis of polymer lab
  • • Flexural testing lab
  • • Shear testing lab
  • • Intrinsic viscosity of polymers lab
  • • Inherent viscosity of polymers lab
  • • Relative viscosity of polymers lab
  • • Failure Analysis of lab
  • • Polymer testing lab
  •  
    RUBBER PRODUCTS TESTING LAB
     
  • • Rubber gaskets testing lab
  • • Rubber pads testing lab
  • • Rubber O- Rings testing lab
  • • Rubber granules testing lab
  • • Rubber sponges testing lab
  • • Rubber corks testing lab
  • • Rubber tires testing lab
  • • Rubber seals testing lab
  • • Rubber mats testing lab
  • • Rubber automotive parts testing lab
  • • Rubber aerospace parts testing lab
  • • Other Rubber products testing lab
  • • Rubber shoes testing lab
  • • Rubber soles testing lab
  • • Rubber gloves testing lab
  • • Rubber bellows testing lab
  • • Allied rubber products testing lab
  • • Testing and analysis of crumb rubber
  • • Rubber degradation studies
  • • Rubber compound analysis
  • • Rubber product reverse engineering
  • • Rubber material identification
  •  
    Types of Rubber Tested
     
  • • Natural rubber (NR)
  • • Synthetic Polyisporene (IR)
  • • Butyl rubber
  • • Chlorobutyl rubber (CR)
  • • Bromo butyl rubber
  • • Polybutadiene
  • • Styrene-butadiene rubber (SBR)
  • • Nitrile butadiene rubber (NBR)
  • • Hydrogenated nitrile-butadiene rubber
  • • Carboxylated nitrile butadiene rubber
  • • Chloroprene rubber
  • • Ethylene propylene rubber (EPM)
  • • Ethylene propylene diene rubber (EPDM)
  • • Epichlorohydrin rubber
  • • Polyacrylic rubber
  • • Silicone rubber
  • • Fluorosilicones
  • • Fluorphosphazene
  • • Fluorinated elastomer - Viton
  • • Fluorinated elastomer - Aflas
  • • Fluorinated elastomer - Kalrez
  • • Polysulfides
  • • Polyether block amides
  • • Chlorosulfonated polyethylene (Hypalon)
  • • Ethylene vinyl acetate (EVA)
  •  
    Thermoplastic Elastomers Tested
     
  • • Polyolefin
  • • Copolyester-ether
  • • Polyester
  • • Styrene-Butadiene block copolymers
  • • Sytrene-Ethylene block copolymers
  • • Polyester polyurethane
  • • Polyether polyurethane
  •  
    Soil Testing Services
     
    CBR In Situ Soil Testing Services in chad , CBR Laboratory, Soaked Single Point Soil Testing Services in chad , Chloride Content Soil Testing Services in chad , Electrical Resistivity Soil Testing Services in chad , Linear Shrinkage Soil Testing Services in chad , Modified Procter Compaction Test Soil Testing Services in chad , Organic Matter Content Soil Testing Services in chad , Particle Size Distribution by Hygrometer, Sieve Analysis and Hygrometer Soil Testing Services in chad ,
     
    Concrete Testing Services
     
    Chloride Content, Permeability and Ponding Concrete Testing in chad , Core Compressive Strength Concrete Testing in chad , Coring: 10cm and 15cm diameter Concrete Testing in chad , Cube Compressive Strength Concrete Testing in chad , Depth of Carbonation Concrete Testing in chad , Drying Shrinkage/ wetting Expansion Concrete Testing in chad , Flexural Strength Concrete Testing in chad , Hammer Sounding Concrete Testing in chad , Porosity Concrete Testing in chad , Rebound Hammer Survey Concrete Testing in chad , Sulphate Content Concrete Testing in chad , Ultrasonic Survey Concrete Testing in chad , Water Absorption and penetration Concrete Testing in chad ,
     
    Bitumen Testing Services
     
    Bitumen Content Bitumen Testing in chad , Bitumen Penetration Bitumen Testing in chad , Flash Point Bitumen Testing in chad , Specific Gravity Bitumen Testing in chad , Softening Point Bitumen Testing in chad , Paraffin Wax Bitumen Testing in chad , Loss on Heating Bitumen Testing in chad , Water Content Bitumen Testing in chad , Ductility Test Bitumen Testing in chad , Bitumen Emulsion Bitumen Testing in chad ,
     
    Concrete Mix Design services
     
    Abrasion Resistance Concrete Mix Design services in chad , Abrasion Value Concrete Mix Design services in chad , Accelerated Cube Strength Concrete Mix Design services in chad , Air Content & Alkali Content Concrete Mix Design services in chad , Bleeding Test Concrete Mix Design services in chad , Block Density Concrete Mix Design services in chad , Bridge Load Test Concrete Mix Design services in chad , Compressive Strength Concrete Mix Design services in chad , Core Cutting Concrete Mix Design services in chad , Permeability Test Concrete Mix Design services in chad , Rapid Chloride Penetration Test (RCPT) Concrete Mix Design services in chad , Brick Testing Services Concrete Mix Design services in chad , Apparent Porosity and Density Concrete Mix Design services in chad , Cold Crushing Strength Concrete Mix Design services in chad , Permanent Linear Change (PLC) Concrete Mix Design services in chad , Abrasion Resistance Concrete Mix Design services in chad , Creep Test Concrete Mix Design services in chad , Refractoriness under load (RUL) Concrete Mix Design services in chad , Modulus of Rapture Concrete Mix Design services in chad , Compressive Test Concrete Mix Design services in chad , Water Absorption Test Concrete Mix Design services in chad ,
     
    Tiles Testing Services
     
    Dimension Tiles Testing Services in chad , Flexural Strength Tiles Testing Services in chad , Surface Quality Tiles Testing Services in chad , Breaking Strength Tiles Testing Services in chad , Abrasion Resistance Tiles Testing Services in chad , Compressive Strength Tiles Testing Services in chad , Impact Resistance Tiles Testing Services in chad , Thermal Expansion Tiles Testing Services in chad , Chemical Resistance Tiles Testing Services in chad , Bulk Density Tiles Testing Services in chad , Staining Resistance Materials Tiles Testing Services in chad ,
     
    Mortar Testing Services
     
    In Situ Metallography Mortar Testing Services in chad , Reduced Wastage Mortar Testing Services in chad , Accurate Content of Cement Mortar Testing Services in chad , Consistent Strength and Quality Mortar Testing Services in chad , Enhanced Health and Safety on Site Mortar Testing Services in chad , Reduced Mixing and Labour Costs Mortar Testing Services in chad , Cement Testing Services Mortar Testing Services in chad , Chemical Analysis Mortar Testing Services in chad , Compressive Strength Mortar Testing Services in chad , Fineness Mortar Testing Services in chad , Heat Of Hydration Mortar Testing Services in chad , Loss On Ignition Mortar Testing Services in chad , Physical Analysis Mortar Testing Services in chad , Setting Time Mortar Testing Services in chad , Soundness Mortar Testing Services in chad ,
     
    ToR Steel Testing Services
     
    Bend Test ToR Steel Testing Services in chad , Chemical Analysis ToR Steel Testing Services in chad , Elongation ToR Steel Testing Services in chad , Ultimate Tensile Strength ToR Steel Testing Services in chad , 0.2% Proof Stress / Yield stress ToR Steel Testing Services in chad , Mass per meter Run ToR Steel Testing Services in chad , Rebend Test ToR Steel Testing Services in chad ,
     
    Ceramic Testing Services
     
    Refractories & Allied materials Ceramic Testing Services in chad , White Ware which includes Tableware, Tiles, Cookwares and Sanitary Ware Ceramic Testing Services in chad , Structural including Bricks, Pipes, and Tiles Ceramic Testing Services in chad , Engineering Ceramics Ceramic Testing Services in chad ,
     
    CIVIL - NDT TESTING SERVICES
     
    CIVIL NDT - CONCRETE TESTING SERVICES
     
    CONCRETE FOR BRIDGES, DAMS, BUILDINGS, SUBWAYS, TUNNELS ETC..
      Ultrasonic Pulse Velocity Testing in chad , Rebound Hammer Testing in chad , Rebar Locator in chad , Depth of concrete in chad , Half Cell Potential Testing in chad , Carbonation Testing in chad , Pile Integrity Testing in chad , Visual Inspection and Field Services in chad , In-Situ Compressive Strength (design strength, and existing structures) in chad ,
       
      CONSTRUCTION MATERIALS TESTING EQUIPMENTS:
       
      Pile Testing Systems in chad , Structural Monitoring Systems in chad , Asphalt Testing Systems in chad , Pavement Testing in chad , Rock and Soil Laboratory Test Systems in chad , Non-Destructive Tests for Concrete in chad , Geotechnical & Vibration Monitoring Systems in chad , Pavement Condition Monitoring in chad , Concrete and Cement Lab Systems in chad ,
       
      LAB TESTING - CONCRETE AND CONCRETING MATERIALS
       
      Laboratory Tests on Construction Materials as per Standards. in chad ,
       
      Cement in chad , Aggregate in chad , Bricks in chad , Blocks in chad , Tension test on rebars in chad , Chemical test on Rebars in chad , Water Analysis in chad , Cube test in chad , Accelerated cube test (ACT) in chad , Rapid Chloride test (RCPT) in chad , Concrete Mix Design in chad , Fly ash in chad , Slag and Silica fume in chad , Self compacting concrete in chad , Temperature controlled concrete in chad ,
       
      CIVIL NDT AND CONCRETE - TESTING SERVICES
       
      Civil NDT Investigation in chad , Concrete Investigation in chad , coating Thickness Measurement on Concrete Structures in chad , Compressive Strength Testing in chad , Concrete Mix Design in chad , Bitumen Mix Design in chad , Core extraction Testing in chad , Core Sampling Testing in chad , Concrete Core Testing in chad , Concrete Cube Testing in chad , Chemical Analysis in chad , Electrical Resistivity Testing in chad , Ground Penetrating Radar Survey in chad , Sieve Analysis in chad , Ultrasonic Low Frequency Testing in chad , UPV Testing in chad , Vibration Analysis of Building in chad , Leak Testing in chad , CT Scan on Conctete in chad , Element Analysis on Concrete in chad , Impact Echo Testing in chad , Linear Polarization Testing in chad , Load Testing in chad , Permeability Testing in chad , petrography of concrete in chad , Pullout Testing in chad , Cut and Pullout Testing (CPO Test) in chad , Impulse Response Test in chad , Impact Echo Test in chad , Ground Penetrating Radar (GPR) in chad , Crack Depth Measurement in chad ,
      Reinforcement Location and Corrosion Assessments
      Reinforcement Location by Ground Penetrating Radar (GPR) in chad , Cover Assessment in chad , Half Cell Potential Tests in chad , Resistivity Tests in chad , Corrosion Rate Assessment in chad , Carbonation Test in chad ,
      Repair Quality Assessment
      Bond Test in chad , Anchor / Rebar Pull-out Strength in chad , Chemical Tests in chad ,
       
      Types of Material Testing Laboratory
       
      pvc material testing Laboratory in chad , pvc pipe testing Laboratory in chad , rubber testing Laboratory in chad , polymer testing Laboratory in chad , latex testing Laboratory in chad , plastic testing Laboratory in chad , abs plastic testing Laboratory in chad , packaging material testing Laboratory in chad , food packaging material testing Laboratory in chad , civil material testing Laboratory in chad , construction material testing Laboratory in chad , spring testing Laboratory in chad , wood testing Laboratory in chad , paint testing Laboratory in chad , bricks testing Laboratory in chad , resin testing Laboratory in chad , thermoplastic testing Laboratory in chad , foam testing Laboratory in chad , sponge testing Laboratory in chad , heavy metal testing in chad , coal testing Laboratory in chad , coal coke testing in chad , thermal coal testing in chad , metallurgical coke testing in chad , petrolium coke testing in chad , fertilizer testing in chad , cement testing Laboratory in chad , fly ash testing in chad , aggregates testing Laboratory in chad , rock testing Laboratory in chad , textile testing Laboratory in chad , fabric and garment testing Laboratory in chad , fabric testing Laboratory in chad , asphalt testing Laboratory in chad , uts utm testing in chad , triaxial rock testing in chad ...
       
      Types of Plastics Testing Laboratory
       
      Polyarylate plastic testing Laboratory in chad , Polyurethane (PUR) plastic testing Laboratory in chad , Acrylonitrile Ethylene Styrene (AES) plastic testing Laboratory in chad , Polyaryletherketone (PAEK) plastic testing Laboratory in chad , Polyethylene (PE) plastic testing Laboratory in chad , Thermoplastic Elastomer (TPE) plastic testing Laboratory in chad , Polyurethane Thermoset Elastomer (TSU) plastic testing Laboratory in chad , Acrylonitrile Styrene (AS) plastic testing aLaboratory in chad , Acrylonitrile Styrene Acrylate (ASA) plastic testing Laboratory in chad , Polybutadiene Rubber (PBR) plastic testing Laboratory in chad , SiliconeAlphamethylstyrene (AMS) plastic testing Laboratory in chad , Polycaprolactone (PCL) plastic testing Laboratory in chad , Styrene Acrylonitrile (SAN) plastic testing Laboratory in chad , Biodegradable Polymers plastic testing Laboratory in chad , Styrene Acrylonitrile Silicone (SAS) plastic testing Laboratory in chad , Cellulose Acetate (CA) plastic testing Laboratory in chad , PolyesterStyrene Maleic Anhydride (SMA) plastic testing Laboratory in chad , Diallyl Phthalate (DAP) plastic testing Laboratory in chad , Polyether Imide (PEI) plastic testing Laboratory in chad , Styrenic Vinyl Acrylonitrile (SVA) plastic testing Laboratory in chad , Dicyclopentadiene (DCPD) plastic testing Laboratory in chad , Epoxy plastic testing and analysis Laboratory in chad , Polyethylene Naphthalate (PEN) plastic testing Laboratory in chad , Thermoplastic Polyurethane (TPU) plastic testing Laboratory in chad , Fluoropolymer plastic testing Laboratory in chad , Polyimide (PI) plastic testing Laboratory in chad , FuranPolylactic Acid (PLA) plastic testing Laboratory in chad , Thermoset (TS) plastic testing Laboratory in chad , Ionomer plastic testing Laboratory in chad , Polymethylpentene (PMP) plastic testing Laboratory in chad , Thermoset Elastomer (TSE) plastic testing Laboratory in chad , Polyphenylene Ether (PPE) plastic testing Laboratory in chad , Vinyl Alcohol (VOH) plastic testing Laboratory in chad , Methyl Cellulose (MC) plastic testing Laboratory in chad , Polyphenylene Sulfide (PPS) plastic testing Laboratory in chad , Methyl Methacrylate (MM) plastic testing Laboratory in chad ...
       
      POLYMER PRODUCTS TESTING LABORATORY
       
      Polyarylate polymer testing Laboratory in chad , Polyurethane (PUR) polymer testing Laboratory in chad , Acrylonitrile Ethylene Styrene (AES) polymer testing Laboratory in chad , Polyaryletherketone (PAEK) polymer testing Laboratory in chad , Polyethylene (PE) polymer testing Laboratory in chad , Thermopolymer Elastomer (TPE) polymer testing Laboratory in chad , Polyurethane Thermoset Elastomer (TSU) polymer testing Laboratory in chad , Acrylonitrile Styrene (AS) polymer testing Laboratory in chad , Acrylonitrile Styrene Acrylate (ASA) polymer testing Laboratory in chad , Polybutadiene Rubber (PBR) polymer testing Laboratory in chad , SiliconeAlphamethylstyrene (AMS) polymer testing Laboratory in chad , Polycaprolactone (PCL) polymer testing Laboratory in chad , Styrene Acrylonitrile (SAN) polymer testing Laboratory in chad , Biodegradable Polymers polymer testing Laboratory in chad , Styrene Acrylonitrile Silicone (SAS) polymer testing Laboratory in chad , Cellulose Acetate (CA) polymer testing Laboratory in chad , PolyesterStyrene Maleic Anhydride (SMA) polymer testing Laboratory in chad , Diallyl Phthalate (DAP) polymer testing Laboratory in chad , Polyether Imide (PEI) polymer testing Laboratory in chad , Styrenic Vinyl Acrylonitrile (SVA) polymer testing Laboratory in chad , Dicyclopentadiene (DCPD) polymer testing Laboratory in chad , Epoxy polymer testing Laboratory in chad , Polyethylene Naphthalate (PEN) polymer testing Laboratory in chad , Thermopolymer Polyurethane (TPU) polymer testing Laboratory in chad , Fluoropolymer polymer testing Laboratory in chad , Polyimide (PI) polymer testing Laboratory in chad , FuranPolylactic Acid (PLA) polymer testing Laboratory in chad , Thermoset (TS) polymer testing Laboratory in chad , Ionomer polymer testing Laboratory in chad , Polymethylpentene (PMP) polymer testing Laboratory in chad , Thermoset Elastomer (TSE) polymer testing Laboratory in chad , Polyphenylene Ether (PPE) polymer testing Laboratory in chad , Vinyl Alcohol (VOH) polymer testing Laboratory in chad , Methyl Cellulose (MC) polymer testing Laboratory in chad , Polyphenylene Sulfide (PPS) polymer testing Laboratory in chad , Methyl Methacrylate (MM) polymer testing Laboratory in chad , Polymer product testing Laboratory in chad , Polymer failure analysis Laboratory in chad , Polymer reverse engineering Laboratory in chad , Polymer analytical testing Laboratory in chad , Mechanical testing of polymer Laboratory in chad , polymers product testing Laboratory in chad , Tensile testing of polymer Laboratory in chad , Compression testing Laboratory in chad , Bend testing O polymer Laboratory in chad , Chemical analysis of polymer Laboratory in chad , Physical testing of polymer Laboratory in chad , FTIR analysis of polymer Laboratory in chad , Polymer testing Laboratoryoratory services Thermal analysis of polymer Laboratory in chad , DSC Analysis of polymer Laboratory in chad , Failure analysis of polymer Laboratory in chad , Flexural testing Laboratory in chad , Shear testing Laboratory in chad , Intrinsic viscosity of polymers Laboratory in chad , Inherent viscosity of polymers Laboratory in chad , Relative viscosity of polymers Laboratory in chad , Failure Analysis of Laboratory in chad , Polymer testing Laboratory in chad ...
       
      RUBBER PRODUCTS TESTING LABORATORY
       
      Rubber gaskets testing Laboratory in chad , Rubber pads testing Laboratory in chad , Rubber O- Rings testing Laboratory in chad , Rubber granules testing Laboratory in chad , Rubber sponges testing Laboratory in chad , Rubber corks testing Laboratory in chad , Rubber tires testing Laboratory in chad , Rubber seals testing Laboratory in chad , Rubber mats testing Laboratory in chad , Rubber automotive parts testing Laboratory in chad , Rubber aerospace parts testing Laboratory in chad , Other Rubber products testing Laboratory in chad , Rubber shoes testing Laboratory in chad , Rubber soles testing Laboratory in chad , Rubber gloves testing Laboratory in chad , Rubber bellows testing Laboratory in chad , Allied rubber products testing Laboratory in chad , Testing and analysis of crumb rubber in chad , Rubber degradation studies in chad , Rubber compound analysis in chad , Rubber product reverse engineering in chad , Rubber material identification in chad ...
       
      Types of Rubber Testing Laboratory
       
      Natural rubber (NR) in chad , Synthetic Polyisporene (IR) in chad , Butyl rubber in chad , Chlorobutyl rubber (CR) in chad , Bromo butyl rubber in chad , Polybutadiene in chad , Styrene-butadiene rubber (SBR) in chad , Nitrile butadiene rubber (NBR) in chad , Hydrogenated nitrile-butadiene rubber in chad , Carboxylated nitrile butadiene rubber in chad , Chloroprene rubber in chad , Ethylene propylene rubber (EPM) in chad , Ethylene propylene diene rubber (EPDM) in chad , Epichlorohydrin rubber in chad , Polyacrylic rubber in chad , Silicone rubber in chad , Fluorosilicones in chad , Fluorphosphazene in chad , Fluorinated elastomer - Viton in chad , Fluorinated elastomer - Aflas in chad , Fluorinated elastomer - Kalrez in chad , Polysulfides in chad , Polyether block amides in chad , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in chad ...
       
      list of our services following cities
       
      Moundou | Sarh | Abéché | Kelo | Khumri | Pala | Am Timan | Bongor | Mongo | Doba | Athy | Lai | Oum Hadjer | Bitkin | Mao | Massaget | Durban | Leray | kins | N'Djamena | Moundou | Sarh | Abéché | Kelo | Koumra | Pala | Am Timan | Bongor | Mongo | Doba | Ati | Fada | Laï | Oum Hadjer | Bitkine | Mao | Massaguet | Dourbali | Mboursou Léré | Kyabé | Benoy | Massakory | Moussoro | Bokoro | Béré | Bousso | Faya-Largeau | Bébédja | Ngama | Adré | Bol | Guelendeng | Moïssala | Biltine | Goundi | Gounou Gaya | Beïnamar | Melfi | Béboto | Massenya | Aozou | Goz Béïda | Iriba | Goz Beïda | Abéché | Abou-Deïa | Adé | Adré | Am Dam | Amdjarass | Am Timan | Aouzou | Arada | Ati | Baïbokoum | Bardaï | Bébédjia | Béboto | Beinamar | Bénoye | Béré | Biltine | Bitkine | Bokoro | Bol | Bongor | Bousso | Djédaa | Doba | Dourbali | Fada | Faya-Largeau | Fianga | Gaoui | Goré | Goundi | Gounou Gaya | Goz Beïda | Guélengdeng | Guéréda | Haraze | Iriba | Kélo | Koro Toro | Koumra | Kyabé | Laï | Léré | Linia | Mangalmé | Mao | Massaguet | Massakory | Massenya | Melfi | Moïssala | Moundou | Mongo | Moussoro | N'Djamena | Ngama | Ouara | Oum Hadjer | Pala | Sarh | Zouar ....