AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

Water leakage/seepage Investigation - Building
 
 
 
1. What are the common causes of water leakage?
 
Common causes of water leakage :
 
  • * Leakage in the drainage pipes of the upper, adjacent or your own flat.
  • * Leakage in the water supply pipes of the upper, adjacent or your own flat.
  • * Deteriorated waterproofing of floor slabs or bath-tub seals.
  • * Seepage of waste water or rain water through roof / external wall.
  •  
    water seepage Testing methods
     
  • 1. Dye Tracer Test
  • 2. Electrical capacitance Investigation
  • 3. Electrical Resistance Investigation
  • 4. Microwave Leakage Testing
  • 5. Infrared Thermography Testing
  • 6. Pressure Test
  • 7. Humidity Sensors Test
  • 8. Electrical Earth Leakage Test
  • 9. Flood Testing
  • 10. Water Spray Test
  • 11. Acoustic Leak Testing
  •  
    WATER LEAKAGE ACCURACY OF INVESTIGATION
     
  • 1. Two common sources of water seepage in buildings are from the external, e.g. rainfall, and from above or the alleged source sites, e.g. domestic use of water.
  • 2. The former is obvious and can readily be identified with certainty. The main difficulty is to identify the source/cause of water seepage coming from above (e.g. from the bathroom immediate above an alleged water seepage site).
  • 3. If the parties are cooperative, there is a good chance that the problem of water seepage can be alleviated by investigating/identifying the sources and carrying out proper repair. In majority of the cases, repeated repair will have to be carried out
  •  
    WATER LEAKAGE COMMON METHODS OF INVESTIGATION
     
  • Methodology 1: The alleged source site is first subjected to dyed water to simulate the water source(s). Afterwards, measurement of moisture is carried out in the alleged water seepage site. Typical examples include flooding test, water spray test and dye test. It is generally considered as the most direct means to identify/differentiate different water source(s). However, it is not applicable in majority of the cases due to non-corporation of owners/occupiers of the alleged source site thereby disallowing any flooding test, water spray test or dye test to be carried out from the alleged water seepage site.
  •  
  • Methodology 2: Without simulating the water source(s), measurement of moisture is carried out in the alleged water seepage site. Source(s) and cause(s) of water seepage are interpreted from the measurement and this requires high level of professional knowledge and expertise.
  •  
  • The commonly used techniques for investigating the causes and/or sources of water seepage.
  •  
    Common methods of investigating water seepage
     
  • 1. Dye test - Through thickness penetration
  • 2. Protimeter measurement - Limit to surface
  • 3. Infrared thermography - From surface to nominal depth
  • 4. Microwave moisture meter - Up to 110 mm or more
  •  
    1. Dye Test
     
  • Dye test is the most commonly used technique, inexpensive and requiring minimal technical skills. It is used by the Joint Office as the routine method for systematic investigation and is recommended as a DIY investigation tool (FEHD and BD). Dye test is carried out by ponding the alleged source site (e.g. flooding the bathroom) with dyed water (“the ponding area”). The result is positive if dye is visible from below. Recently, fluorescent dyes are used thereby signs of water seepage are observed from below by an ultraviolet light in dark condition. Quite often dye is not detected from below in the damp area (“negative results”) even though water originates from the ponding area.
  •  
    2. Protimeter Measurement
     
  • Protimeter is a device commonly used to assess the surface moisture content of a material. Surface moisture content is measured through pushing two needles/electrodes into the material. It enables rapid assessment of surface moisture content. Due to the heterogeneous properties of concrete and unknown properties of finishes on the surface of concrete, readings obtained from a protimeter cannot be taken directly as surface moisture content, unless the readings reflect very high moisture content. As precalibration of surface moisture content of concrete is virtually not possible, readings are taken from both affected areas and non-affected areas (or control points) and the values are compared to estimate the surface moisture content of affected areas
  •  
    3. Infrared thermography
     
  • Infrared thermography is based on the principle that wet and dry building components have different rates of heat gain and retention. This technique is normally applied using a hand-held infrared camera with recording device . Wet zone is identified based on physical characteristics of wet material with slower heat gain and heat loss. It may be able to display water paths, hidden water pipes, etc. that are close to the surface. As temperature differential can be very small (between 0.1C to 0.5C) for identifying a wet area, an uneven surface, e.g. spalling/delamination of finishes, may distort the temperature gradient making the thermographic images unreliable. this is usually the case in an affected area
  •  
    4. Microwave moisture meter
     
  • Microwave moisture meter has gained popularity in measuring the moisture content of a material. It is based on the propagation of electromagnetic waves in the material. Moisture content is estimated from the energy loss due to absorption of water. The device includes a generator and a receiver . It has the disadvantage of requiring a good contact surface for both generator and receiver which may not be possible to achieve in majority of the cases. It is also sensitive to heterogeneous nature of concrete that may cause error in the readings obtained from the measurement. As each measurement is presented as averaged moisture up to a certain depth, accuracy is also adversely affected by the presence of cavities, pipes or reinforcement embedded inside concrete.
  •  
  • Apart from dye test with the advantage of identifying water path(s) or source(s) of water seepage directly, the above are all interpretive testing methods. In some cases, microwave moisture measurement may also provide good indication of the water path(s) or source(s) of water seepage but this largely depends on the quality of the test data
  •  
  • Protimeter and infrared thermography can only identify the presence of moisture near the surface. As moisture measurements are indirectly assessed via electrical resistance and heat, respectively, foreign materials inside concrete may cause similar changes on the measurement to that of water. For instance, presence of salt may affect the reading and thus the accuracy of the measurement. Therefore, the data is used to compare the moisture condition between two different areas of the same material, namely control points not affected by water seepage and the affected areas.
  •  
  • Data obtained from the field works has suggested that there exists no universal method that can provide reliable results to identify the cause(s) of water seepage. Method of investigation has to be determined case by case based on the condition of concrete at the surface and in the interior
  •  
  • As indicated in the above, accuracy depends on the condition of the affected areas and how the tests are performed. Correct interpretation of the test results further relies on an understanding of the underlining principle; limitations; and the pros and cons of applying different methods of investigations. We are of the view that there is in lack of an expertise or a unify approach to select the proper tests; to perform the tests and/or to interpret the results. Obviously, it is very difficult if not impossible task for the parties, who are laymen to the tests, to select the tests; to perform the tests and/or to interpret the results, save and except dye test. A performance-based approach is proposed to handle water seepage in buildings.
  •  
    CONCLUSIONS
     
  • Pursuant to reported cases and relevant provisions in the ordinances, the standard of investigation is to be one with high degree of certainty and the investigation so conducted is able to distinguish all possible causes of water seepage. Common difficulties in resolving water seepage disputes are due to (a) inability to identify the source(s)/cause(s) of water seepage and (b) non-corporation of owners/occupiers of premises alleged of causing water seepage. In respect of (a), it depends on the condition of the affected areas; how the tests are performed; and correct interpretation of the test results. It is necessary to improve and/or develop methods of investigating water seepage. As an alternative approach, it is suggested to identify the source(s) of water seepage from moisture readings obtained from alleged water seepage sites and vibration readings obtained from exposed waste pipes without entering the alleged source sites. Further, it is desirable to shift the method of investigation from an informative approach to a consultative approach with interaction by the party/parties. We need to dedicate tools to match the accuracy/reliability of methods of investigation with the goals of the parties and the goals of the investigation and to provide the parties with opportunities to decide how they would like to proceed. By following a performance-based approach, it is possible to reduce the overall cost and time by not carrying out unnecessary and/or unreliable tests. This may ultimately assist the public to resolve the problem of water seepage in buildings.
  •  
    Water Seepage Investigation List
     
    Water Seepage Problem investigation , Leak & Water Seepage testing in cameroon , Dampness, Seepage and Water Leakage Inspection in cameroon , Dampness, Seepage and Water Leakage detection in cameroon , Detecting Leakage , water leakage testing in cameroon , Seepage testing Source in cameroon , Residential Building seepage tesing in cameroon , Seepage testing using Fluoride , Seepage on Walls testing in cameroon , Dampness on Walls tesing in cameroon , Preventing Dampness in cameroon , Preventing Dampness Types of Waterproofing Material , Effects of Dampness detection in cameroon , Causes of Dampness detection in cameroon , Seepage or Dampness on Walls , Seepage Inspections , Leak detection and location in cameroon , Leak detection testing in cameroon , Leak detection in cameroon , Leak detection problem inspection , Water Testing and Leakage inspection , Dampness, Seepage and Water Leakage Inspection In cameroon , dampness testing in cameroon , seepage testing in cameroon , water leakage testing in cameroon , leak testing in cameroon , Hydrostatic & Diagnostic Pressure Testing and Pipe Leak , Basements Dampness Seepage and Water Leakage testing in cameroon , Escalators Dampness Seepage and Water Leakage testing in cameroon , Electrical rooms Dampness Seepage and Water Leakage testing in cameroon , Electrical Transformers Dampness Seepage and Water Leakage testing in cameroon , DG sets Dampness Seepage and Water Leakage testing in cameroon , Water treatment plant Dampness Seepage and Water Leakage testing in cameroon , Sewage treatment plant Dampness Seepage and Water Leakage testing in cameroon , Sumps & Pumping plant Dampness Seepage and Water Leakage testing in cameroon , Rain water harvesting system Dampness Seepage and Water Leakage testing in cameroon , Firefighting systems Dampness Seepage and Water Leakage testing in cameroon , Lobbies Dampness Seepage and Water Leakage testing in cameroon , Water treatment plant Dampness Seepage and Water Leakage testing in cameroon , Sewage treatment plant Dampness Seepage and Water Leakage testing in cameroon , Sumps & Pumping plant Dampness Seepage and Water Leakage testing in cameroon , Rain water harvesting system Plant Dampness Seepage and Water Leakage testing in cameroon , Corridors Dampness Seepage and Water Leakage testing in cameroon , Parking Dampness Seepage and Water Leakage testing in cameroon , Podium Dampness Seepage and Water Leakage testing in cameroon , Overhead water tanks Dampness Seepage and Water Leakage testing in cameroon , Helipad Dampness Seepage and Water Leakage testing in cameroon , Roads and pathways Dampness Seepage and Water Leakage testing in cameroon , Staircases Dampness Seepage and Water Leakage testing in cameroon , Basement ventilation and exhaust systems Dampness Seepage and Water Leakage testing in cameroon , Dampness & damages in all common areas Dampness Seepage and Water Leakage testing in cameroon , Painting work Dampness Seepage and Water Leakage testing in cameroon , Shafts and ducts which are open for inspection Dampness Seepage and Water Leakage testing in cameroon ...
     
    civil ndt and mechanical ndt - non destructive testing in cameroon list
     
    civil ndt testing - non-destructive testing in cameroon , concrete for bridges testing in cameroon , dams civil testing in cameroon ,, building civil ndt in cameroon , subway civil testing in cameroon , tunnel civil ndt in cameroon , ultrasonic pulse velocity testing in cameroon , rebound hammer testing in cameroon , rebar locator in cameroon , depth of concrete in cameroon , half cell potential testing in cameroon , carbonation testing in cameroon , pile integrity testing in cameroon , visual inspection and field in cameroon , civil ndt - concrete testing in cameroon , ultrasonic pulse velocity testing in cameroon , rebound hammer testing in cameroon , rebar locator in cameroon , depth of concrete in cameroon , half cell potential testing in cameroon , carbonation testing in cameroon , pile integrity testing in cameroon , visual inspection and field in cameroon , in-situ compressive strength testing in cameroon , civil design strength in cameroon , civil existing structures in cameroon , construction materials testing in cameroon , pile testing systems in cameroon , structural monitoring systems in cameroon , asphalt testing systems in cameroon , pavement testing in cameroon , rock and soil laboratory test systems in cameroon , non-destructive tests for concrete in cameroon , geotechnical & vibration monitoring systems in cameroon , pavement condition monitoring in cameroon , concrete and cement lab systems in cameroon , civil lab testing concrete and concreting material analysis , civil laboratory testing in cameroon , construction material testing in cameroon , cement testing in cameroon , aggregate testing in cameroon , bricks testing in cameroon , blocks testing in cameroon , tension test on rebars testing in cameroon , chemical test on rebars testing in cameroon , water analysis in cameroon , cube test in cameroon , accelerated cube test (act) in cameroon , rapid chloride test (rcpt) in cameroon , concrete mix design in cameroon , fly ash in cameroon , slag and silica fume in cameroon , self compacting concrete in cameroon , temperature controlled concrete in cameroon , civil ndt and concrete testing in cameroon , civil ndt investigation in cameroon , concrete investigation in cameroon , coating thickness measurement on concrete structures in cameroon , compressive strength testing in cameroon , concrete mix design in cameroon , bitumen mix design in cameroon , core extraction testing in cameroon , core sampling testing in cameroon , concrete core testing in cameroon , concrete cube testing in cameroon , chemical analysis in cameroon , electrical resistivity testing in cameroon , ground penetrating radar survey in cameroon , sieve analysis in cameroon , ultrasonic low frequency testing in cameroon , upv testing in cameroon , vibration analysis of building in cameroon , leak testing in cameroon , ct scan on conctete in cameroon , element analysis on concrete in cameroon , impact echo testing in cameroon , linear polarization testing in cameroon , load testing in cameroon , permeability testing in cameroon , petrography of concrete in cameroon , pullout testing in cameroon , cut and pullout testing (cpo test) in cameroon , impulse response test in cameroon , impact echo test in cameroon , ground penetrating radar (gpr) in cameroon , crack depth measurement in cameroon , reinforcement location and corrosion assessments in cameroon , reinforcement location by ground penetrating radar (gpr) in cameroon , cover assessment in cameroon , half cell potential tests in cameroon , resistivity tests in cameroon , corrosion rate assessment in cameroon , carbonation test in cameroon , repair quality assessment in cameroon , bond test in cameroon , anchor rebar pull out strength in cameroon , chemical testing in cameroon , ultrasonic testing in cameroon , radiographic testing in cameroon , magnetic particle testing in cameroon , penetrant testing in cameroon , eddy current testing in cameroon , visual testing in cameroon , ultrasonic thickness measurement testing in cameroon , vibration analysis in cameroon , time of flight diffraction (tofd) in cameroon , phased array ultrasonic testing (paut) in cameroon , ndt testing in cameroon , non destructive testing in cameroon , ndt in cameroon , ultrasonic testing in cameroon , magnetic particle testing in cameroon , dye penetrant testing in cameroon , radiographic testing in cameroon , eddy current testing in cameroon , vibration analysis in cameroon , paut – toft in cameroon , ultrasonic thickness gauging testing in cameroon , helium leak detection in cameroon , rfet / nfet / pect testing in cameroon , internal rotary inspection system (iris) in cameroon , acoustic pulse reflectometry (apr) in cameroon , positive material identification testing in cameroon , magnetic flux leakage (mfl) testing in cameroon , acoustic emission testing in cameroon , flouresent leak detection in cameroon , long range ultrasonic testing - lrut in cameroon , thermography inspection in cameroon , leak testing in cameroon , tky joints ultrasonic testing in cameroon , aws d1.1 structural steel ultrasonic testing in cameroon , ndt capabilities for mechanical and civil in cameroon , ultrasonic inspection in cameroon , time of flight diffraction (tofd) and phased array ut in cameroon , magnetic particle testing in cameroon , dye penetrant testing in cameroon , radiographic testing in cameroon , eddy current testing in cameroon , weld ability study in cameroon , visual inspection and field in cameroon ...
     
    list of our services following cities
     
    Afghanistan | Africa | Albania | Algeria | Americas | Andorra | Angola | Anguilla | Antigua and Barbuda | Argentina | Armenia | Aruba | Asia | Australia | Australia and New Zealand | Austria | Azerbaijan | Bahamas | Bahrain | Bangladesh | Barbados | Belarus | Belgium | Belize | Benin | Bermuda | Bhutan | Bolivia (Plurinational State of) | Bosnia and Herzegovina | Botswana | Brazil | British Virgin Islands | Brunei Darussalam | Bulgaria | Burkina Faso | Burundi | Cabo Verde | Cambodia | Cameroon | Canada | Caribbean | Cayman Islands | Central African Republic | Central America | Central Asia | Chad | Chile | China, Hong Kong SAR | China, Macao Special Administrative Region | China, People's Republic of | Colombia | Comoros | Congo | Cook Islands | Costa Rica | Côte d'Ivoire | Croatia | Cuba | Curaçao | Cyprus | Czechia | Democratic People's Republic of Korea | Democratic Republic of the Congo | Denmark | Djibouti | Dominica | Dominican Republic | Eastern Africa | Eastern Asia | Eastern Europe | Ecuador | Egypt | El Salvador | Equatorial Guinea | Eritrea | Estonia | Ethiopia | Europe | Fiji | Finland | Former Czechoslovakia | Former Ethiopia | Former Netherlands Antilles | Former Sudan | Former USSR | Former Yugoslavia | France | French Polynesia | Gabon | Gambia | Georgia | Germany | Ghana | Greece | Greenland | Grenada | Guatemala | Guinea | Guinea-Bissau | Guyana | Haiti | Honduras | Hungary | Iceland | India | Indonesia | Iran, Islamic Republic of | Iraq | Ireland | Israel | Italy | Jamaica | Japan | Jordan | Kazakhstan | Kenya | Kingdom of Eswatini | Kiribati | Kosovo | Kuwait | Kyrgyzstan | Lao People's Democratic Republic | Latin America and the Caribbean | Latvia | Lebanon | Lesotho | Liberia | Libya | Liechtenstein | Lithuania | Luxembourg | Madagascar | Malawi | Malaysia | Maldives | Mali | Malta | Marshall Islands | Mauritania | Mauritius | Melanesia | Mexico | Micronesia | Micronesia (Federated States of) | Middle Africa | Monaco | Mongolia | Montenegro | Montserrat | Morocco | Mozambique | Myanmar | Namibia | Nauru | Nepal | Netherlands | New Caledonia | New Zealand | Nicaragua | Niger | Nigeria | Northern Africa | Northern America | Northern Europe | Norway | Oceania | Oman | Pakistan | Palau | Panama | Papua New Guinea | Paraguay | Peru | Philippines | Poland | Polynesia | Portugal | Puerto Rico | Qatar | Republic of Korea | Republic of Moldova | Republic of North Macedonia | Romania | Russian Federation | Rwanda | Saint Kitts and Nevis | Saint Lucia | Saint Vincent and the Grenadines | Samoa | San Marino | Sao Tome and Principe | Saudi Arabia | Senegal | Serbia | Seychelles | Sierra Leone | Singapore | Sint Maarten (Dutch part) | Slovakia | Slovenia | Solomon Islands | Somalia | South Africa | South America | South Sudan | South-Eastern Asia | Southern Africa | Southern Asia | Southern Europe | Spain | Sri Lanka | State of Palestine | Sub-Saharan Africa | Sudan | Suriname | Sweden | Switzerland | Syrian Arab Republic | Tajikistan | Thailand | Timor-Leste | Togo | Tonga | Trinidad and Tobago | Tunisia | Turkey | Turkmenistan | Turks and Caicos Islands | Tuvalu | Uganda | Ukraine | United Arab Emirates | United Kingdom of Great Britain and Northern Ireland | United Republic of Tanzania: Mainland | United Republic of Tanzania: Zanzibar | United States | Uruguay | Uzbekistan | Vanuatu | Venezuela (Bolivarian Republic of) | Viet Nam | Western Africa | Western Asia | Western Europe | World | Yemen | Yemen: Former Democratic Yemen | Yemen: Former Yemen Arab Republic | Zambia | Zimbabwe ...
     
    list of our services following city
     
    Douala | Yaoundé | Garoua | Kousséri | Bamenda | Maroua | Bafoussam | Mokolo | Ngaoundéré | Bertoua | Edéa | Loum | Kumba | Nkongsamba | Mbouda | Dschang | Foumban | Ébolowa | Guider | Foumbot | Bafang | Yagoua | Mbalmayo | Meïganga | Bali | Limbe | Bafia | Wum | Bangangté | Tiko | Kribi | Mora | Sangmélima | Kumbo | Nkoteng | Mutengene | Buea | Garoua Boulaï | Batouri | Fundong | Fontem | Mbanga | Banyo | Manjo | Melong | Tibati | Muyuka | Obala | Nanga Eboko | Penja | Mbandjok | Kaélé | Bamusso | Lagdo | Tcholliré | Bélabo | Lolodorf | Eséka | Mamfe | Dizangué | Akonolinga | Bogo | Tonga | Abong Mbang | Yokadouma | Bazou | Mundemba | Bétaré Oya | Rey Bouba | Pitoa | Mindif | Babanki | Mbengwi | Akom II | Batibo | Belo | Dimako | Ambam | Njinikom | Ndikiniméki | Bonabéri | Kontcha | Yabassi | Bansoa | Ngou | Makary | Bekondo | Bandjoun | Bélel | Bamendjou | Ngambé | Ntui | Mme-Bafumen | Saa | Poli | Bankim | Bana | Doumé | Nguti | Ndom | Okola | Yoko | Jakiri | Ndelele | Minta | Djohong | Dibombari | Tignère | Ngomedzap | Akono | Essé | Koza | Okoa | Mbankomo | Ngoro | Diang | Somié | Mvangué | Ombésa | Mouanko | Évodoula | Mbang ...
     
    list of our services following urban Areas
     
    Djang | Foumban | Buea | Ebolowa | Dschang | Guider | Foumbot | Bafang | Yagoua | Mbalmayo | Meiganga | Limbe | Bandjoun | Bafia | Wum | Bangangte | Tiko | Mora | Kribi | Sangmelima | Kumbo | Nkoteng | Mutengene | Garoua Boulai | Batouri | Fundong | Fontem | Banyo | Manjo | Melong | Tibati | Muyuka | Obala | Nanga Eboko | Kaele | Lagdo | Tchollire | Belabo | Lolodorf | Eseka | Mbandjock | Mamfe | Bafut | Idenau | Akonolinga | Bogo | Abong Mbang | Yokadouma | Betare Oya | Rey Bouba | Monatele | Mindif | Mfou | Dimako | Mbengwi | Akom | Ambam | Njinikom | Bonaberi | Yabassi | Mme | Bana | Poli | Saa | Doume | Dibombari | Tignere | Mvangue | Ombessa ...