AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

Water leakage/seepage Investigation - Building
 
 
 
1. What are the common causes of water leakage?
 
Common causes of water leakage :
 
  • * Leakage in the drainage pipes of the upper, adjacent or your own flat.
  • * Leakage in the water supply pipes of the upper, adjacent or your own flat.
  • * Deteriorated waterproofing of floor slabs or bath-tub seals.
  • * Seepage of waste water or rain water through roof / external wall.
  •  
    water seepage Testing methods
     
  • 1. Dye Tracer Test
  • 2. Electrical capacitance Investigation
  • 3. Electrical Resistance Investigation
  • 4. Microwave Leakage Testing
  • 5. Infrared Thermography Testing
  • 6. Pressure Test
  • 7. Humidity Sensors Test
  • 8. Electrical Earth Leakage Test
  • 9. Flood Testing
  • 10. Water Spray Test
  • 11. Acoustic Leak Testing
  •  
    WATER LEAKAGE ACCURACY OF INVESTIGATION
     
  • 1. Two common sources of water seepage in buildings are from the external, e.g. rainfall, and from above or the alleged source sites, e.g. domestic use of water.
  • 2. The former is obvious and can readily be identified with certainty. The main difficulty is to identify the source/cause of water seepage coming from above (e.g. from the bathroom immediate above an alleged water seepage site).
  • 3. If the parties are cooperative, there is a good chance that the problem of water seepage can be alleviated by investigating/identifying the sources and carrying out proper repair. In majority of the cases, repeated repair will have to be carried out
  •  
    WATER LEAKAGE COMMON METHODS OF INVESTIGATION
     
  • Methodology 1: The alleged source site is first subjected to dyed water to simulate the water source(s). Afterwards, measurement of moisture is carried out in the alleged water seepage site. Typical examples include flooding test, water spray test and dye test. It is generally considered as the most direct means to identify/differentiate different water source(s). However, it is not applicable in majority of the cases due to non-corporation of owners/occupiers of the alleged source site thereby disallowing any flooding test, water spray test or dye test to be carried out from the alleged water seepage site.
  •  
  • Methodology 2: Without simulating the water source(s), measurement of moisture is carried out in the alleged water seepage site. Source(s) and cause(s) of water seepage are interpreted from the measurement and this requires high level of professional knowledge and expertise.
  •  
  • The commonly used techniques for investigating the causes and/or sources of water seepage.
  •  
    Common methods of investigating water seepage
     
  • 1. Dye test - Through thickness penetration
  • 2. Protimeter measurement - Limit to surface
  • 3. Infrared thermography - From surface to nominal depth
  • 4. Microwave moisture meter - Up to 110 mm or more
  •  
    1. Dye Test
     
  • Dye test is the most commonly used technique, inexpensive and requiring minimal technical skills. It is used by the Joint Office as the routine method for systematic investigation and is recommended as a DIY investigation tool (FEHD and BD). Dye test is carried out by ponding the alleged source site (e.g. flooding the bathroom) with dyed water (“the ponding area”). The result is positive if dye is visible from below. Recently, fluorescent dyes are used thereby signs of water seepage are observed from below by an ultraviolet light in dark condition. Quite often dye is not detected from below in the damp area (“negative results”) even though water originates from the ponding area.
  •  
    2. Protimeter Measurement
     
  • Protimeter is a device commonly used to assess the surface moisture content of a material. Surface moisture content is measured through pushing two needles/electrodes into the material. It enables rapid assessment of surface moisture content. Due to the heterogeneous properties of concrete and unknown properties of finishes on the surface of concrete, readings obtained from a protimeter cannot be taken directly as surface moisture content, unless the readings reflect very high moisture content. As precalibration of surface moisture content of concrete is virtually not possible, readings are taken from both affected areas and non-affected areas (or control points) and the values are compared to estimate the surface moisture content of affected areas
  •  
    3. Infrared thermography
     
  • Infrared thermography is based on the principle that wet and dry building components have different rates of heat gain and retention. This technique is normally applied using a hand-held infrared camera with recording device . Wet zone is identified based on physical characteristics of wet material with slower heat gain and heat loss. It may be able to display water paths, hidden water pipes, etc. that are close to the surface. As temperature differential can be very small (between 0.1C to 0.5C) for identifying a wet area, an uneven surface, e.g. spalling/delamination of finishes, may distort the temperature gradient making the thermographic images unreliable. this is usually the case in an affected area
  •  
    4. Microwave moisture meter
     
  • Microwave moisture meter has gained popularity in measuring the moisture content of a material. It is based on the propagation of electromagnetic waves in the material. Moisture content is estimated from the energy loss due to absorption of water. The device includes a generator and a receiver . It has the disadvantage of requiring a good contact surface for both generator and receiver which may not be possible to achieve in majority of the cases. It is also sensitive to heterogeneous nature of concrete that may cause error in the readings obtained from the measurement. As each measurement is presented as averaged moisture up to a certain depth, accuracy is also adversely affected by the presence of cavities, pipes or reinforcement embedded inside concrete.
  •  
  • Apart from dye test with the advantage of identifying water path(s) or source(s) of water seepage directly, the above are all interpretive testing methods. In some cases, microwave moisture measurement may also provide good indication of the water path(s) or source(s) of water seepage but this largely depends on the quality of the test data
  •  
  • Protimeter and infrared thermography can only identify the presence of moisture near the surface. As moisture measurements are indirectly assessed via electrical resistance and heat, respectively, foreign materials inside concrete may cause similar changes on the measurement to that of water. For instance, presence of salt may affect the reading and thus the accuracy of the measurement. Therefore, the data is used to compare the moisture condition between two different areas of the same material, namely control points not affected by water seepage and the affected areas.
  •  
  • Data obtained from the field works has suggested that there exists no universal method that can provide reliable results to identify the cause(s) of water seepage. Method of investigation has to be determined case by case based on the condition of concrete at the surface and in the interior
  •  
  • As indicated in the above, accuracy depends on the condition of the affected areas and how the tests are performed. Correct interpretation of the test results further relies on an understanding of the underlining principle; limitations; and the pros and cons of applying different methods of investigations. We are of the view that there is in lack of an expertise or a unify approach to select the proper tests; to perform the tests and/or to interpret the results. Obviously, it is very difficult if not impossible task for the parties, who are laymen to the tests, to select the tests; to perform the tests and/or to interpret the results, save and except dye test. A performance-based approach is proposed to handle water seepage in buildings.
  •  
    CONCLUSIONS
     
  • Pursuant to reported cases and relevant provisions in the ordinances, the standard of investigation is to be one with high degree of certainty and the investigation so conducted is able to distinguish all possible causes of water seepage. Common difficulties in resolving water seepage disputes are due to (a) inability to identify the source(s)/cause(s) of water seepage and (b) non-corporation of owners/occupiers of premises alleged of causing water seepage. In respect of (a), it depends on the condition of the affected areas; how the tests are performed; and correct interpretation of the test results. It is necessary to improve and/or develop methods of investigating water seepage. As an alternative approach, it is suggested to identify the source(s) of water seepage from moisture readings obtained from alleged water seepage sites and vibration readings obtained from exposed waste pipes without entering the alleged source sites. Further, it is desirable to shift the method of investigation from an informative approach to a consultative approach with interaction by the party/parties. We need to dedicate tools to match the accuracy/reliability of methods of investigation with the goals of the parties and the goals of the investigation and to provide the parties with opportunities to decide how they would like to proceed. By following a performance-based approach, it is possible to reduce the overall cost and time by not carrying out unnecessary and/or unreliable tests. This may ultimately assist the public to resolve the problem of water seepage in buildings.
  •  
    Water Seepage Investigation List
     
    Water Seepage Problem investigation , Leak & Water Seepage testing in botswana , Dampness, Seepage and Water Leakage Inspection in botswana , Dampness, Seepage and Water Leakage detection in botswana , Detecting Leakage , water leakage testing in botswana , Seepage testing Source in botswana , Residential Building seepage tesing in botswana , Seepage testing using Fluoride , Seepage on Walls testing in botswana , Dampness on Walls tesing in botswana , Preventing Dampness in botswana , Preventing Dampness Types of Waterproofing Material , Effects of Dampness detection in botswana , Causes of Dampness detection in botswana , Seepage or Dampness on Walls , Seepage Inspections , Leak detection and location in botswana , Leak detection testing in botswana , Leak detection in botswana , Leak detection problem inspection , Water Testing and Leakage inspection , Dampness, Seepage and Water Leakage Inspection In botswana , dampness testing in botswana , seepage testing in botswana , water leakage testing in botswana , leak testing in botswana , Hydrostatic & Diagnostic Pressure Testing and Pipe Leak , Basements Dampness Seepage and Water Leakage testing in botswana , Escalators Dampness Seepage and Water Leakage testing in botswana , Electrical rooms Dampness Seepage and Water Leakage testing in botswana , Electrical Transformers Dampness Seepage and Water Leakage testing in botswana , DG sets Dampness Seepage and Water Leakage testing in botswana , Water treatment plant Dampness Seepage and Water Leakage testing in botswana , Sewage treatment plant Dampness Seepage and Water Leakage testing in botswana , Sumps & Pumping plant Dampness Seepage and Water Leakage testing in botswana , Rain water harvesting system Dampness Seepage and Water Leakage testing in botswana , Firefighting systems Dampness Seepage and Water Leakage testing in botswana , Lobbies Dampness Seepage and Water Leakage testing in botswana , Water treatment plant Dampness Seepage and Water Leakage testing in botswana , Sewage treatment plant Dampness Seepage and Water Leakage testing in botswana , Sumps & Pumping plant Dampness Seepage and Water Leakage testing in botswana , Rain water harvesting system Plant Dampness Seepage and Water Leakage testing in botswana , Corridors Dampness Seepage and Water Leakage testing in botswana , Parking Dampness Seepage and Water Leakage testing in botswana , Podium Dampness Seepage and Water Leakage testing in botswana , Overhead water tanks Dampness Seepage and Water Leakage testing in botswana , Helipad Dampness Seepage and Water Leakage testing in botswana , Roads and pathways Dampness Seepage and Water Leakage testing in botswana , Staircases Dampness Seepage and Water Leakage testing in botswana , Basement ventilation and exhaust systems Dampness Seepage and Water Leakage testing in botswana , Dampness & damages in all common areas Dampness Seepage and Water Leakage testing in botswana , Painting work Dampness Seepage and Water Leakage testing in botswana , Shafts and ducts which are open for inspection Dampness Seepage and Water Leakage testing in botswana ...
     
    civil ndt and mechanical ndt - non destructive testing in botswana list
     
    civil ndt testing - non-destructive testing in botswana , concrete for bridges testing in botswana , dams civil testing in botswana ,, building civil ndt in botswana , subway civil testing in botswana , tunnel civil ndt in botswana , ultrasonic pulse velocity testing in botswana , rebound hammer testing in botswana , rebar locator in botswana , depth of concrete in botswana , half cell potential testing in botswana , carbonation testing in botswana , pile integrity testing in botswana , visual inspection and field in botswana , civil ndt - concrete testing in botswana , ultrasonic pulse velocity testing in botswana , rebound hammer testing in botswana , rebar locator in botswana , depth of concrete in botswana , half cell potential testing in botswana , carbonation testing in botswana , pile integrity testing in botswana , visual inspection and field in botswana , in-situ compressive strength testing in botswana , civil design strength in botswana , civil existing structures in botswana , construction materials testing in botswana , pile testing systems in botswana , structural monitoring systems in botswana , asphalt testing systems in botswana , pavement testing in botswana , rock and soil laboratory test systems in botswana , non-destructive tests for concrete in botswana , geotechnical & vibration monitoring systems in botswana , pavement condition monitoring in botswana , concrete and cement lab systems in botswana , civil lab testing concrete and concreting material analysis , civil laboratory testing in botswana , construction material testing in botswana , cement testing in botswana , aggregate testing in botswana , bricks testing in botswana , blocks testing in botswana , tension test on rebars testing in botswana , chemical test on rebars testing in botswana , water analysis in botswana , cube test in botswana , accelerated cube test (act) in botswana , rapid chloride test (rcpt) in botswana , concrete mix design in botswana , fly ash in botswana , slag and silica fume in botswana , self compacting concrete in botswana , temperature controlled concrete in botswana , civil ndt and concrete testing in botswana , civil ndt investigation in botswana , concrete investigation in botswana , coating thickness measurement on concrete structures in botswana , compressive strength testing in botswana , concrete mix design in botswana , bitumen mix design in botswana , core extraction testing in botswana , core sampling testing in botswana , concrete core testing in botswana , concrete cube testing in botswana , chemical analysis in botswana , electrical resistivity testing in botswana , ground penetrating radar survey in botswana , sieve analysis in botswana , ultrasonic low frequency testing in botswana , upv testing in botswana , vibration analysis of building in botswana , leak testing in botswana , ct scan on conctete in botswana , element analysis on concrete in botswana , impact echo testing in botswana , linear polarization testing in botswana , load testing in botswana , permeability testing in botswana , petrography of concrete in botswana , pullout testing in botswana , cut and pullout testing (cpo test) in botswana , impulse response test in botswana , impact echo test in botswana , ground penetrating radar (gpr) in botswana , crack depth measurement in botswana , reinforcement location and corrosion assessments in botswana , reinforcement location by ground penetrating radar (gpr) in botswana , cover assessment in botswana , half cell potential tests in botswana , resistivity tests in botswana , corrosion rate assessment in botswana , carbonation test in botswana , repair quality assessment in botswana , bond test in botswana , anchor rebar pull out strength in botswana , chemical testing in botswana , ultrasonic testing in botswana , radiographic testing in botswana , magnetic particle testing in botswana , penetrant testing in botswana , eddy current testing in botswana , visual testing in botswana , ultrasonic thickness measurement testing in botswana , vibration analysis in botswana , time of flight diffraction (tofd) in botswana , phased array ultrasonic testing (paut) in botswana , ndt testing in botswana , non destructive testing in botswana , ndt in botswana , ultrasonic testing in botswana , magnetic particle testing in botswana , dye penetrant testing in botswana , radiographic testing in botswana , eddy current testing in botswana , vibration analysis in botswana , paut – toft in botswana , ultrasonic thickness gauging testing in botswana , helium leak detection in botswana , rfet / nfet / pect testing in botswana , internal rotary inspection system (iris) in botswana , acoustic pulse reflectometry (apr) in botswana , positive material identification testing in botswana , magnetic flux leakage (mfl) testing in botswana , acoustic emission testing in botswana , flouresent leak detection in botswana , long range ultrasonic testing - lrut in botswana , thermography inspection in botswana , leak testing in botswana , tky joints ultrasonic testing in botswana , aws d1.1 structural steel ultrasonic testing in botswana , ndt capabilities for mechanical and civil in botswana , ultrasonic inspection in botswana , time of flight diffraction (tofd) and phased array ut in botswana , magnetic particle testing in botswana , dye penetrant testing in botswana , radiographic testing in botswana , eddy current testing in botswana , weld ability study in botswana , visual inspection and field in botswana ...
     
    list of our services following cities
     
    gaborone | francistown | molepolole | serowe | selibe phikwe | maun | kanye | mahalapye | mogoditshane | mochudi | lobatse | palapye | ramotswa | moshupa | tlokweng | bobonong | thamaga | letlhakane | tonota | mmadinare | jwaneng | tutume | gabane | shoshong | ghanzi | letlhakeng | orapa | kopong | mmopane | kasane | shakawe | lentsweletau | molapowabojang | gumare | tshabong | lerala | mmathethe | gweta | mathangwane | mmankgodi | maitengwe | rakops | dukwi | mopipi | etsha | otse | sefophe | sehithwa | nata | tumasera/seleka | moiyabana | lotlhakane | metsimotlhaba | bokaa | tati siding | tsetsebjwe | hukuntsi | kang | maunatlala | tobane | nkange | ramokgonami | sebina | oodi | kumakwane | manyana | toteng | shorobe | mandunyane | thabala | lecheng | shashe-mooke | khudumelapye | ranaka | marobela | masunga | malolwane | borolong | nokaneng | chadibe | seronga | mookane | south-east district | north-east district | kweneng district | central district | central district | north-west district | southern district | central district | kweneng district | kgatleng district | south-east district | central district | south-east district | southern district | south-east district | central district | kweneng district | central district | central district | central district | southern district | central district | kweneng district | central district | ghanzi district | kweneng district | central district | kweneng district | kweneng district | north-west district | north-west district | kweneng district | southern district | north-west district | kgalagadi district | central district | southern district | central district | central district | kweneng district | central district | central district | central district | central district | north-west district | south-east district | central district | north-west district | central district | central district | central district | southern district | kweneng district | kgatleng district | north-east district | central district | kgalagadi district | kgalagadi district | central district | central district | central district | central district | central district | kgatleng district | kweneng district | southern district | north-west district | north-west district | central district | central district | central district | central district | kweneng district | southern district | central district | north-east district | kgatleng district | central district | north-west district | central district | north-west district | central district | gaborone | francistown | kweneng east | central serowe/palapye | selibe phikwe | ngamiland east | ngwaketse | central mahalapye | kweneng east | kgatleng | lobatse | central serowe/palapye | south east | ngwaketse | south east | central bobonong | kweneng east | central boteti | central tutume | central bobonong | jwaneng | central tutume | kweneng east | central mahalapye | ghanzi | kweneng west | orapa | kweneng east | kweneng east | ngamiland west | ngamiland east | kweneng east | ngawaketse | ngamiland west | kgalagadi south | central serowe/palapye | borolong | central tutume | central tutume | kweneng east | central tutume | central boteti | central tutume | central boteti | ngamiland west | south east | central bobonong | ngamiland east | central tutume | central mahalapye | central serowe/palapye | ngwaketse | kweneng east | kgatleng | north east | central bobonong | kgalagadi north | kgalagadi north | central serowe/palapye | central bobonong | central tutume | central mahalapye | central tutume | kgatleng | kweneng east | ngwaketse | ngamiland east | ngamiland east | central tutume | central serowe/palapye | central serowe/palapye | central tutume | kweneng west | ngwaketse | central tutume | north east | kgatleng | central tutume | ngamiland west | central mahalapye | ngamiland west | central mahalapye ....