AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

LATEX TESTING LAB
 
 
 
 
Latex Testing Laboratory - Chemical Test / Physical Test
 
Chemical testing for Latex Testing Lab
 
  • Protein analysis
  •  
  • We test according to ASTM standard D 1076 and ISO procedure.
  • Sample is centrifuged for Extracting original latex by centrifuge machine at 2,300 RPM.
  • Extracted sample is analyzed under UV spectrophotometer. Amount of protein the latex is determined by photometric method.
  • We have UV-1800 model UV spectrophotometer. This instrument is fully computerized and results are generated automatically.
  •  
    Chemical analysis of latex ASTM standard D 1076 and ISO procedure.
     
  • Amount of copper and manganese content.
  • Type of preservatives of latex.
  •  
  • We too do following tests on latex according to ASTM and ISO Procedure:
  •  
  • Density
  • Sludge content
  • Coagulum content
  • pH of latex
  • Conductivity of latex
  • Alkalinity of Latex
  • KOH number of latex
  • ZNO number
  • Nitrogen content
  • Chloroform number
  • Non volatile acid number
  • Carbon dioxide number
  •  
    Physical testing for Latex Testing Lab
     
  • Dry rubber content (DRC) and Total solid content of the latex:
  •  
  • We test DRC and total solid content of the latex according to ASTM standard D 1076 and ISO procedure.
  • We have highly precise weighing balance with accuracy of 0.01 mg for doing these analyses.
  •  
  • Stability of the latex:
  •  
  • We test according to ASTM standard D 1076 and ISO procedure.
  • We analyze mechanical stability, chemical stability, heat stability, Emulsion stability of latex sample.
  • We have klaxon latex mechanical stability test apparatus to analyze stability.
  • Test is done at 14,000 RPM.
  •  
  • Viscosity
  •  
  • We test according to ASTM standard D 1076.
  • We have Brookfield LVT model, which gives an accurate viscosity result .
  • We will able to measure the viscosity ranging from 50-140,000 centipoises.
  •  
  • Volatile fatty acid:
  •  
  • We test according to ASTM standard D 1076 and ISO procedure.
  • Volatile fatty acid is determined by Markham still apparatus with steam generator.
  •  
  • We too do following tests on latex according to ASTM and ISO Procedure:
  •  
  • Density
  • Sludge content
  • Coagulum content
  • pH of latex
  • Conductivity of latex
  • Alkalinity of Latex
  • KOH number of latex
  • ZNO number
  • Nitrogen content
  • Chloroform number
  • Non volatile acid number
  • Carbon dioxide number
  • POLYMER TESTING
     
     
  • Polymer Composition Testing lab, Polymer analysis, polymer products testing lab, polymer product failure analysis, polymer identification lab, polymer testing services, polymer grade identification lab, polymer tensile testing services , polymer product testing services, Polymer Testing Laboratory
  •  
    Physical and Mechanical properties of Polymers Testing Lab
     
  • • Polymer identification
  • • Specification Gravity / Density
  • • Water absorption
  • • Compressive strength
  • • Impact Strength
  • • Flammability
  • • Tensile Strength
  • • Thermal Expansion
  • • Shear Strength
  • • % Glass Content
  • • Hardness
  • • Cross Breaking / Crushing Strength
  • • Flexural Strength
  • • MOS2
  • • HDT (Heat deflection temperature)
  • • Shrinkage
  • • Melt Flow Index
  • • Melting Point/ Burning rate
  • • Resistance to hot oil
  • • Adhesion Test
  • • Ash Content
  • • Filler Content / ED-XRF for Filler
  • • Content in Rubber, Plastic, FRP (From Na-U)
  •  
    Chemical Analysis of Polymers Testing Lab
     
  • Chemical analysis
  •  
  • Identification of polymers by chemical analysis
  • Reverse engineering of polymer compound
  • Polymers, polymer blends and their additives are effectively extracted according to ASTM methods.
  •  
  • Preliminary examination of the sample
  •  
  • Burning test.
  • Heating test.
  • Beilstein test.
  • Elemental analysis.
  •  
    Rubber samples are tested according to the ASTM D297. Testing Lab
     
  • Burchfield color reaction test.
  • Spot test.
  • Liebermann -Storch-Morawski reaction.
  • Weber reaction test.
  • Azo dye reaction.
  • Morpholine Test.
  • Humal color reaction.
  • Million's test.
  • Gibb's indophenols test.
  • Foucry test.
  • Molisch's test.
  • Diphenyl amine test.
  • Lead acetate test.
  • Confirmatory test for all individual polymers.
  • Organic and inorganic analyses.
  •  
    Physical Testing of Polymers
     
  • Cure Characteristics of Rubber
  • Salt Spray Test
  • Low Temperature Retraction Test
  • Dispersion of fillers & Rubber Blends
  • Tensile Properties
  • Flexural Properties
  • Compression Properties
  • Tear Properties
  • Ozone Characteristics of Polymers
  • Accelerated Ageing of Rubber
  • Compression Set
  • Abrasion Resistance
  • Hardness and Thickness
  • Impact Properties
  • Vicat Softening point
  • Melt Flow Index
  •  
    Analysis of Fillers
     
  • Charecterisation of Carbon Black
  •  
  • Carbon black is a major component of many rubber products and is used for reinforcement and modification of physical properties. We analyze the following major properties of carbon black as per standard test methods .
  •  
  • Iodine Adsorption Number as per ASTM D1510
  • DBP Adsorption Number as per ASTM D2414
  • Sieve Residue as per ASTM D1514
  • Fine and Attrition as per ASTM D1508
  • Pour Density as per ASTM D1513
  • Moisture Content as per ASTM D1509
  • Ash Content as per ASTM D1506
  • Heat loss as per ASTM D1509
  • Toluene discoloration as per ASTM D1618
  • Calorific Value as per ASTM D5865
  •  
     
    POLYMER PRODUCTS TESTING LAB
     
  • • Polyarylate polymer testing lab
  • • Polyurethane (PUR) polymer testing lab
  • • Acrylonitrile Ethylene Styrene (AES) polymer testing lab
  • • Polyaryletherketone (PAEK) polymer testing lab
  • • Polyethylene (PE) polymer testing lab
  • • Thermopolymer Elastomer (TPE) polymer testing lab
  • • Polyurethane Thermoset Elastomer (TSU) polymer testing lab
  • • Acrylonitrile Styrene (AS) polymer testing lab
  • • Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
  • • Polybutadiene Rubber (PBR) polymer testing lab
  • • SiliconeAlphamethylstyrene (AMS) polymer testing lab
  • • Polycaprolactone (PCL) polymer testing lab
  • • Styrene Acrylonitrile (SAN) polymer testing lab
  • • Biodegradable Polymers polymer testing lab
  • • Styrene Acrylonitrile Silicone (SAS) polymer testing lab
  • • Cellulose Acetate (CA) polymer testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
  • • Diallyl Phthalate (DAP) polymer testing lab
  • • Polyether Imide (PEI) polymer testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
  • • Dicyclopentadiene (DCPD) polymer testing lab
  • • Epoxy polymer testing lab
  • • Polyethylene Naphthalate (PEN) polymer testing lab
  • • Thermopolymer Polyurethane (TPU) polymer testing lab
  • • Fluoropolymer polymer testing lab
  • • Polyimide (PI) polymer testing lab
  • • FuranPolylactic Acid (PLA) polymer testing lab
  • • Thermoset (TS) polymer testing lab
  • • Ionomer polymer testing lab
  • • Polymethylpentene (PMP) polymer testing lab
  • • Thermoset Elastomer (TSE) polymer testing lab
  • • Polyphenylene Ether (PPE) polymer testing lab
  • • Vinyl Alcohol (VOH) polymer testing lab
  • • Methyl Cellulose (MC) polymer testing lab
  • • Polyphenylene Sulfide (PPS) polymer testing lab
  • • Methyl Methacrylate (MM) polymer testing lab
  • • Polymer product testing lab
  • • Polymer failure analysis lab
  • • Polymer reverse engineering lab
  • • Polymer analytical testing lab
  • • Mechanical testing of polymer lab
  • • polymers product testing lab
  • • Tensile testing of polymer lab
  • • Compression testing lab
  • • Bend testing O polymer lab
  • • Chemical analysis of polymer lab
  • • Physical testing of polymer lab
  • • FTIR analysis of polymer lab
  • • Polymer testing laboratory services
  • • Thermal analysis of polymer lab
  • • DSC Analysis of polymer lab
  • • Failure analysis of polymer lab
  • • Flexural testing lab
  • • Shear testing lab
  • • Intrinsic viscosity of polymers lab
  • • Inherent viscosity of polymers lab
  • • Relative viscosity of polymers lab
  • • Failure Analysis of lab
  • • Polymer testing lab
  •  
    RUBBER PRODUCTS TESTING LAB
     
  • • Rubber gaskets testing lab
  • • Rubber pads testing lab
  • • Rubber O- Rings testing lab
  • • Rubber granules testing lab
  • • Rubber sponges testing lab
  • • Rubber corks testing lab
  • • Rubber tires testing lab
  • • Rubber seals testing lab
  • • Rubber mats testing lab
  • • Rubber automotive parts testing lab
  • • Rubber aerospace parts testing lab
  • • Other Rubber products testing lab
  • • Rubber shoes testing lab
  • • Rubber soles testing lab
  • • Rubber gloves testing lab
  • • Rubber bellows testing lab
  • • Allied rubber products testing lab
  • • Testing and analysis of crumb rubber
  • • Rubber degradation studies
  • • Rubber compound analysis
  • • Rubber product reverse engineering
  • • Rubber material identification
  •  
    Types of Rubber Tested
     
  • • Natural rubber (NR)
  • • Synthetic Polyisporene (IR)
  • • Butyl rubber
  • • Chlorobutyl rubber (CR)
  • • Bromo butyl rubber
  • • Polybutadiene
  • • Styrene-butadiene rubber (SBR)
  • • Nitrile butadiene rubber (NBR)
  • • Hydrogenated nitrile-butadiene rubber
  • • Carboxylated nitrile butadiene rubber
  • • Chloroprene rubber
  • • Ethylene propylene rubber (EPM)
  • • Ethylene propylene diene rubber (EPDM)
  • • Epichlorohydrin rubber
  • • Polyacrylic rubber
  • • Silicone rubber
  • • Fluorosilicones
  • • Fluorphosphazene
  • • Fluorinated elastomer - Viton
  • • Fluorinated elastomer - Aflas
  • • Fluorinated elastomer - Kalrez
  • • Polysulfides
  • • Polyether block amides
  • • Chlorosulfonated polyethylene (Hypalon)
  • • Ethylene vinyl acetate (EVA)
  •  
    Thermoplastic Elastomers Tested
     
  • • Polyolefin
  • • Copolyester-ether
  • • Polyester
  • • Styrene-Butadiene block copolymers
  • • Sytrene-Ethylene block copolymers
  • • Polyester polyurethane
  • • Polyether polyurethane
  •  
    RUBBER, PLASTIC, Sponge , Vinyl FOAM , Flexible Material Testing
     
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM 1149)
  • Cracking Outdoors (ASTM d1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Izod Impact Strength (ASTM D256)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  •  
    Types of Material Testing Laboratory
     
    pvc material testing Laboratory in australia , pvc pipe testing Laboratory in australia , rubber testing Laboratory in australia , polymer testing Laboratory in australia , latex testing Laboratory in australia , plastic testing Laboratory in australia , abs plastic testing Laboratory in australia , packaging material testing Laboratory in australia , food packaging material testing Laboratory in australia , civil material testing Laboratory in australia , construction material testing Laboratory in australia , spring testing Laboratory in australia , wood testing Laboratory in australia , paint testing Laboratory in australia , bricks testing Laboratory in australia , resin testing Laboratory in australia , thermoplastic testing Laboratory in australia , foam testing Laboratory in australia , sponge testing Laboratory in australia , heavy metal testing in australia , coal testing Laboratory in australia , coal coke testing in australia , thermal coal testing in australia , metallurgical coke testing in australia , petrolium coke testing in australia , fertilizer testing in australia , cement testing Laboratory in australia , fly ash testing in australia , aggregates testing Laboratory in australia , rock testing Laboratory in australia , textile testing Laboratory in australia , fabric and garment testing Laboratory in australia , fabric testing Laboratory in australia , asphalt testing Laboratory in australia , uts utm testing in australia , triaxial rock testing in australia ...
     
    Types of Plastics Testing Laboratory
     
    Polyarylate plastic testing Laboratory in australia , Polyurethane (PUR) plastic testing Laboratory in australia , Acrylonitrile Ethylene Styrene (AES) plastic testing Laboratory in australia , Polyaryletherketone (PAEK) plastic testing Laboratory in australia , Polyethylene (PE) plastic testing Laboratory in australia , Thermoplastic Elastomer (TPE) plastic testing Laboratory in australia , Polyurethane Thermoset Elastomer (TSU) plastic testing Laboratory in australia , Acrylonitrile Styrene (AS) plastic testing aLaboratory in australia , Acrylonitrile Styrene Acrylate (ASA) plastic testing Laboratory in australia , Polybutadiene Rubber (PBR) plastic testing Laboratory in australia , SiliconeAlphamethylstyrene (AMS) plastic testing Laboratory in australia , Polycaprolactone (PCL) plastic testing Laboratory in australia , Styrene Acrylonitrile (SAN) plastic testing Laboratory in australia , Biodegradable Polymers plastic testing Laboratory in australia , Styrene Acrylonitrile Silicone (SAS) plastic testing Laboratory in australia , Cellulose Acetate (CA) plastic testing Laboratory in australia , PolyesterStyrene Maleic Anhydride (SMA) plastic testing Laboratory in australia , Diallyl Phthalate (DAP) plastic testing Laboratory in australia , Polyether Imide (PEI) plastic testing Laboratory in australia , Styrenic Vinyl Acrylonitrile (SVA) plastic testing Laboratory in australia , Dicyclopentadiene (DCPD) plastic testing Laboratory in australia , Epoxy plastic testing and analysis Laboratory in australia , Polyethylene Naphthalate (PEN) plastic testing Laboratory in australia , Thermoplastic Polyurethane (TPU) plastic testing Laboratory in australia , Fluoropolymer plastic testing Laboratory in australia , Polyimide (PI) plastic testing Laboratory in australia , FuranPolylactic Acid (PLA) plastic testing Laboratory in australia , Thermoset (TS) plastic testing Laboratory in australia , Ionomer plastic testing Laboratory in australia , Polymethylpentene (PMP) plastic testing Laboratory in australia , Thermoset Elastomer (TSE) plastic testing Laboratory in australia , Polyphenylene Ether (PPE) plastic testing Laboratory in australia , Vinyl Alcohol (VOH) plastic testing Laboratory in australia , Methyl Cellulose (MC) plastic testing Laboratory in australia , Polyphenylene Sulfide (PPS) plastic testing Laboratory in australia , Methyl Methacrylate (MM) plastic testing Laboratory in australia ...
     
    POLYMER PRODUCTS TESTING LABORATORY
     
    Polyarylate polymer testing Laboratory in australia , Polyurethane (PUR) polymer testing Laboratory in australia , Acrylonitrile Ethylene Styrene (AES) polymer testing Laboratory in australia , Polyaryletherketone (PAEK) polymer testing Laboratory in australia , Polyethylene (PE) polymer testing Laboratory in australia , Thermopolymer Elastomer (TPE) polymer testing Laboratory in australia , Polyurethane Thermoset Elastomer (TSU) polymer testing Laboratory in australia , Acrylonitrile Styrene (AS) polymer testing Laboratory in australia , Acrylonitrile Styrene Acrylate (ASA) polymer testing Laboratory in australia , Polybutadiene Rubber (PBR) polymer testing Laboratory in australia , SiliconeAlphamethylstyrene (AMS) polymer testing Laboratory in australia , Polycaprolactone (PCL) polymer testing Laboratory in australia , Styrene Acrylonitrile (SAN) polymer testing Laboratory in australia , Biodegradable Polymers polymer testing Laboratory in australia , Styrene Acrylonitrile Silicone (SAS) polymer testing Laboratory in australia , Cellulose Acetate (CA) polymer testing Laboratory in australia , PolyesterStyrene Maleic Anhydride (SMA) polymer testing Laboratory in australia , Diallyl Phthalate (DAP) polymer testing Laboratory in australia , Polyether Imide (PEI) polymer testing Laboratory in australia , Styrenic Vinyl Acrylonitrile (SVA) polymer testing Laboratory in australia , Dicyclopentadiene (DCPD) polymer testing Laboratory in australia , Epoxy polymer testing Laboratory in australia , Polyethylene Naphthalate (PEN) polymer testing Laboratory in australia , Thermopolymer Polyurethane (TPU) polymer testing Laboratory in australia , Fluoropolymer polymer testing Laboratory in australia , Polyimide (PI) polymer testing Laboratory in australia , FuranPolylactic Acid (PLA) polymer testing Laboratory in australia , Thermoset (TS) polymer testing Laboratory in australia , Ionomer polymer testing Laboratory in australia , Polymethylpentene (PMP) polymer testing Laboratory in australia , Thermoset Elastomer (TSE) polymer testing Laboratory in australia , Polyphenylene Ether (PPE) polymer testing Laboratory in australia , Vinyl Alcohol (VOH) polymer testing Laboratory in australia , Methyl Cellulose (MC) polymer testing Laboratory in australia , Polyphenylene Sulfide (PPS) polymer testing Laboratory in australia , Methyl Methacrylate (MM) polymer testing Laboratory in australia , Polymer product testing Laboratory in australia , Polymer failure analysis Laboratory in australia , Polymer reverse engineering Laboratory in australia , Polymer analytical testing Laboratory in australia , Mechanical testing of polymer Laboratory in australia , polymers product testing Laboratory in australia , Tensile testing of polymer Laboratory in australia , Compression testing Laboratory in australia , Bend testing O polymer Laboratory in australia , Chemical analysis of polymer Laboratory in australia , Physical testing of polymer Laboratory in australia , FTIR analysis of polymer Laboratory in australia , Polymer testing Laboratoryoratory services Thermal analysis of polymer Laboratory in australia , DSC Analysis of polymer Laboratory in australia , Failure analysis of polymer Laboratory in australia , Flexural testing Laboratory in australia , Shear testing Laboratory in australia , Intrinsic viscosity of polymers Laboratory in australia , Inherent viscosity of polymers Laboratory in australia , Relative viscosity of polymers Laboratory in australia , Failure Analysis of Laboratory in australia , Polymer testing Laboratory in australia ...
     
    RUBBER PRODUCTS TESTING LABORATORY
     
    Rubber gaskets testing Laboratory in australia , Rubber pads testing Laboratory in australia , Rubber O- Rings testing Laboratory in australia , Rubber granules testing Laboratory in australia , Rubber sponges testing Laboratory in australia , Rubber corks testing Laboratory in australia , Rubber tires testing Laboratory in australia , Rubber seals testing Laboratory in australia , Rubber mats testing Laboratory in australia , Rubber automotive parts testing Laboratory in australia , Rubber aerospace parts testing Laboratory in australia , Other Rubber products testing Laboratory in australia , Rubber shoes testing Laboratory in australia , Rubber soles testing Laboratory in australia , Rubber gloves testing Laboratory in australia , Rubber bellows testing Laboratory in australia , Allied rubber products testing Laboratory in australia , Testing and analysis of crumb rubber in australia , Rubber degradation studies in australia , Rubber compound analysis in australia , Rubber product reverse engineering in australia , Rubber material identification in australia ...
     
    Types of Rubber Testing Laboratory
     
    Natural rubber (NR) in australia , Synthetic Polyisporene (IR) in australia , Butyl rubber in australia , Chlorobutyl rubber (CR) in australia , Bromo butyl rubber in australia , Polybutadiene in australia , Styrene-butadiene rubber (SBR) in australia , Nitrile butadiene rubber (NBR) in australia , Hydrogenated nitrile-butadiene rubber in australia , Carboxylated nitrile butadiene rubber in australia , Chloroprene rubber in australia , Ethylene propylene rubber (EPM) in australia , Ethylene propylene diene rubber (EPDM) in australia , Epichlorohydrin rubber in australia , Polyacrylic rubber in australia , Silicone rubber in australia , Fluorosilicones in australia , Fluorphosphazene in australia , Fluorinated elastomer - Viton in australia , Fluorinated elastomer - Aflas in australia , Fluorinated elastomer - Kalrez in australia , Polysulfides in australia , Polyether block amides in australia , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in australia ...
     
    list of our services following cities
     
    Afghanistan | Africa | Albania | Algeria | Americas | Andorra | Angola | Anguilla | Antigua and Barbuda | Argentina | Armenia | Aruba | Asia | Australia | Australia and New Zealand | Austria | Azerbaijan | Bahamas | Bahrain | Bangladesh | Barbados | Belarus | Belgium | Belize | Benin | Bermuda | Bhutan | Bolivia (Plurinational State of) | Bosnia and Herzegovina | Botswana | Brazil | British Virgin Islands | Brunei Darussalam | Bulgaria | Burkina Faso | Burundi | Cabo Verde | Cambodia | Cameroon | Canada | Caribbean | Cayman Islands | Central African Republic | Central America | Central Asia | Chad | Chile | China, Hong Kong SAR | China, Macao Special Administrative Region | China, People's Republic of | Colombia | Comoros | Congo | Cook Islands | Costa Rica | Côte d'Ivoire | Croatia | Cuba | Curaçao | Cyprus | Czechia | Democratic People's Republic of Korea | Democratic Republic of the Congo | Denmark | Djibouti | Dominica | Dominican Republic | Eastern Africa | Eastern Asia | Eastern Europe | Ecuador | Egypt | El Salvador | Equatorial Guinea | Eritrea | Estonia | Ethiopia | Europe | Fiji | Finland | Former Czechoslovakia | Former Ethiopia | Former Netherlands Antilles | Former Sudan | Former USSR | Former Yugoslavia | France | French Polynesia | Gabon | Gambia | Georgia | Germany | Ghana | Greece | Greenland | Grenada | Guatemala | Guinea | Guinea-Bissau | Guyana | Haiti | Honduras | Hungary | Iceland | India | Indonesia | Iran, Islamic Republic of | Iraq | Ireland | Israel | Italy | Jamaica | Japan | Jordan | Kazakhstan | Kenya | Kingdom of Eswatini | Kiribati | Kosovo | Kuwait | Kyrgyzstan | Lao People's Democratic Republic | Latin America and the Caribbean | Latvia | Lebanon | Lesotho | Liberia | Libya | Liechtenstein | Lithuania | Luxembourg | Madagascar | Malawi | Malaysia | Maldives | Mali | Malta | Marshall Islands | Mauritania | Mauritius | Melanesia | Mexico | Micronesia | Micronesia (Federated States of) | Middle Africa | Monaco | Mongolia | Montenegro | Montserrat | Morocco | Mozambique | Myanmar | Namibia | Nauru | Nepal | Netherlands | New Caledonia | New Zealand | Nicaragua | Niger | Nigeria | Northern Africa | Northern America | Northern Europe | Norway | Oceania | Oman | Pakistan | Palau | Panama | Papua New Guinea | Paraguay | Peru | Philippines | Poland | Polynesia | Portugal | Puerto Rico | Qatar | Republic of Korea | Republic of Moldova | Republic of North Macedonia | Romania | Russian Federation | Rwanda | Saint Kitts and Nevis | Saint Lucia | Saint Vincent and the Grenadines | Samoa | San Marino | Sao Tome and Principe | Saudi Arabia | Senegal | Serbia | Seychelles | Sierra Leone | Singapore | Sint Maarten (Dutch part) | Slovakia | Slovenia | Solomon Islands | Somalia | South Africa | South America | South Sudan | South-Eastern Asia | Southern Africa | Southern Asia | Southern Europe | Spain | Sri Lanka | State of Palestine | Sub-Saharan Africa | Sudan | Suriname | Sweden | Switzerland | Syrian Arab Republic | Tajikistan | Thailand | Timor-Leste | Togo | Tonga | Trinidad and Tobago | Tunisia | Turkey | Turkmenistan | Turks and Caicos Islands | Tuvalu | Uganda | Ukraine | United Arab Emirates | United Kingdom of Great Britain and Northern Ireland | United Republic of Tanzania: Mainland | United Republic of Tanzania: Zanzibar | United States | Uruguay | Uzbekistan | Vanuatu | Venezuela (Bolivarian Republic of) | Viet Nam | Western Africa | Western Asia | Western Europe | World | Yemen | Yemen: Former Democratic Yemen | Yemen: Former Yemen Arab Republic | Zambia | Zimbabwe ...
     
    list of our services following state or territory
     
    Victoria | New South Wales | Queensland | Western Australia | South Australia | Queensland/New South Wales | New South Wales | Australian Capital Territory/New South Wales | Queensland | New South Wales | New South Wales | Victoria | Tasmania | Queensland | Queensland | Queensland | Northern Territory | Victoria | Victoria | New South Wales/Victoria | Tasmania | Queensland | Queensland | Victoria | Western Australia | New South Wales | Queensland | New South Wales | Queensland | Victoria | Victoria/New South Wales | New South Wales | Queensland | New South Wales | Victoria | New South Wales | New South Wales | Victoria | Western Australia | New South Wales | New South Wales | New South Wales | Western Australia | Victoria | Western Australia | Tasmania | South Australia | Western Australia | New South Wales | New South Wales | Tasmania | Queensland | South Australia | New South Wales | Northern Territory | New South Wales | New South Wales | New South Wales | New South Wales | Victoria | Victoria | Queensland | Victoria/New South Wales | South Australia | New South Wales | New South Wales | New South Wales | Queensland | Victoria | South Australia | New South Wales | New South Wales | Queensland | Western Australia | New South Wales | New South Wales | Victoria | New South Wales | Victoria | South Australia | New South Wales | Victoria | New South Wales | Victoria | Western Australia | Queensland | Western Australia | Tasmania | Queensland | Western Australia | South Australia | South Australia | New South Wales | New South Wales | Victoria | New South Wales | Western Australia | New South Wales | Victoria | Victoria | Queensland ...
     
    list of our services following urban Areas
     
    Melbourne | Sydney | Brisbane | Perth | Adelaide | Gold Coast–Tweed Heads | Newcastle–Maitland | Canberra–Queanbeyan | Sunshine Coast | Central Coast | Wollongong | Geelong | Hobart | Townsville | Cairns | Toowoomba | Darwin | Ballarat | Bendigo | Albury–Wodonga | Launceston | Mackay | Rockhampton | Melton | Bunbury | Coffs Harbour | Bundaberg | Wagga Wagga | Hervey Bay | Shepparton–Mooroopna | Mildura–Wentworth | Port Macquarie | Gladstone–Tannum Sands | Tamworth | Traralgon–Morwell | Bowral–Mittagong | Orange | Warragul–Drouin | Busselton | Dubbo | Nowra–Bomaderry | Bathurst | Geraldton | Warrnambool | Albany | Devonport | Mount Gambier | Kalgoorlie–Boulder | Lismore | Nelson Bay | Burnie–Wynyard | Maryborough | Victor Harbor–Goolwa | Ballina | Alice Springs | Taree | Morisset–Cooranbong | Armidale | Goulburn | Bacchus Marsh | Gisborne–Macedon | Gympie | Echuca–Moama | Whyalla | Forster–Tuncurry | Griffith | St Georges Basin–Sanctuary Point | Yeppoon | Wangaratta | Murray Bridge | Grafton | Camden Haven | Mount Isa | Karratha | Broken Hill | Ulladulla | Moe–Newborough | Batemans Bay | Horsham | Port Lincoln | Singleton | Bairnsdale | Kempsey | Sale | Yanchep | Warwick | Port Hedland | Ulverstone | Emerald | Broome | Port Pirie | Port Augusta | Lithgow | Mudgee | Colac | Muswellbrook | Esperance | Parkes | Swan Hill | Portland | Kingaroy ...
     
    list of our services following urban Centre
     
    Sydney | Melbourne | Brisbane | Perth | Adelaide | Gold Coast–Tweed Heads (Gold Coast part) | Canberra–Queanbeyan (Canberra part) | Newcastle | Central Coast | Wollongong | Sunshine Coast | Hobart | Townsville | Geelong | Cairns | Darwin | Toowoomba | Ballarat | Bendigo | Maitland | Mackay | Launceston | Bunbury | Rockhampton | Gold Coast–Tweed Heads (Tweed Heads part) | Melton | Hervey Bay | Bundaberg | Wagga Wagga | Coffs Harbour | Albury–Wodonga (Albury part) | Shepparton–Mooroopna | Port Macquarie | Orange | Canberra–Queanbeyan (Queanbeyan part) | Albury–Wodonga (Wodonga part) | Sunbury | Dubbo | Tamworth | Bathurst | Mildura–Buronga (Mildura part) | Gladstone | Geraldton | Nowra–Bomaderry | Warrnambool | Kalgoorlie–Boulder | Albany | Blue Mountains | Lismore | Gawler | City of Brisbane | City of Gold Coast | Moreton Bay Region | City of Blacktown | City of Canterbury-Bankstown | City of Casey | Central Coast Council | City of Logan | Sunshine Coast Region | City of Wyndham | Northern Beaches Council | City of Greater Geelong | City of Parramatta | City of Sydney | Cumberland Council | City of Hume | City of Whittlesea | Sutherland Shire | City of Liverpool | City of Ipswich | City of Stirling | City of Wollongong | City of Penrith | City of Wanneroo | City of Fairfield | City of Brimbank | City of Lake Macquarie | City of Monash | Inner West Council | City of Townsville | City of Moreland | The Hills Shire | City of Melbourne | City of Boroondara | Bayside Council | City of Whitehorse | City of Onkaparinga | City of Campbelltown (New South Wales) | City of Melton | Toowoomba Region | Shire of Mornington Peninsula | Cairns Region | City of Greater Dandenong | City of Newcastle | City of Kingston | City of Darebin | City of Knox | City of Joondalup | Redland City | Georges River Council ...