Thermoplastic Materials
• ABS Thermoplastic Testing lab
• Acrylic Thermoplastic Polymer Testing lab
• Polybenzimidazole Thermoplastic Polymer Testing lab
• Polyethylene Thermoplastic Polymers Testing lab
• Homopolymer Thermoplastic Testing lab
• Copolymer Thermoplastic Testing lab
• Polyester Thermoplastic Testing lab
• Polyurethane Thermoplastic Polymer Testing lab
• Styrene Acrylonitrile Polymer Testing lab
Thermoplastic Physical property testing
Physical property tests measure the molecular structure of the material which can often effect the physical properties. The most important properties for measurement include:
• Specific Gravity (ASTM D792):
The ratio of the density of a liquid or solid mass to the density of water at a specific temperature.
• Hardness (ASTM D2240):
The resistance of a plastic material to indentation. It is measured on a durometer machine which led to the industry to call hardness “duro.” Normal specification is plus or minus 3 and three scales are used: Shore A for flexible, Shore C for semi rigid and Shore D for rigid. Usually a delayed reading of 10 or 15 seconds is used.
• Tensile Strength (ASTM D638):
The maximum nominal stress sustained by a test specimen being pulled from both ends, at a specific temperature and a specific rate of stretching. Specification is a minimum amount in Pascals, (10-6 N/mm2).
• Elongation (ASTM D638):
The amount of increased length of a material until breakage. Specification is a minimum percentage.
• Flexural properties (three point bending method) (UNE-EN ISO 178):
The three point bending flexural test provides values for the modulus of elasticity in bending, flexural stress, flexural strain and the flexural stress-strain response of the material. The main advantage of a three point flexural test is the ease of the specimen preparation and testing.
• Impact Energy-Charpy ( UNE-EN ISO 179):
The Charpy impact test, also known as the Charpy V-notch test, is a standardized high strain-rate test which determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material’s notch toughness and acts as a tool to study temperature-dependent ductile-brittle transition.
RESIN TESTING
Chemical and Physical Analysis of Resin Testing Lab
Chemical Analysis of Resin
• Ion exchange capacities by ASTM and other methods
• Carbonate/bicarbonate content (including organically-bound and ionic C-14)
• Ionic composition
• Resin flow testing facilities (kinetics and operating capacity under once-through and recirculation modes for engineering scale-up projections)
• Natural and process-induced fouling
Physical Analysis of Resin
• Slurriability and separability of mixed bed resins
• Wet particle size analysis
• Crush strength (friability – Chatillon) and attrition
• Thermal and oxidation resistance
• Attrition
• Specialized sampling and analysis capabilities for radioactive process resins and waste resins
• Quality assurance and quality control testing of new resins
PLASTIC TESTING
Types of Plastics Testing Offered:
• ABS Plastic Testing Lab
• Polypropylene Testing
• Polyethylene Testing
• PVC Testing lab
• Nylon 6-6 Testing lab
• PTFE Testing Services
• PET Testing Services
• ABS/PC alloys Plastic Testing Lab
• Acetal Plastic Testing Lab
• Acrylic Testing Lab
• Acrylic-styrene copolymer
• Acrylonitrile
• Cellulose Acetate
• Cellulose Acetate Butanal
• Cellulose Acetate Propionate
• Chlorinated polyethylene
• Epoxy resins
• Ethylene vinyl alcohol
• Fluoroplastic – PTFE
• Fluoroplastic – FEP
• Fluoroplastic – PVDF
• Ionomer
• Polyacrylether ketone
• Polyetheether ketone
• Liquid Crystal Polymer
• Melamine formaldehyde
• Phenolics
• Nylon 6
• Nylon 6/6
• Nylon 6/10
• Nylon 6/12
• Nylon 4/6
• Nylon 11
• Nylon 12
• Aromatic polyamide
• Polyamide-Polyimide
• Polyethylene and copolymers
• Polycarbonate
• Polybutylene Terephthalate
• Polycyclohexene dimethanol terephthalate
• PET: Polyethylene terephthalate
• PET/ PC blends
• Polyetherimide
• Polyethersulfone
• Polyimide
• Polymethylpentene
• Polyphenylene oxide
• Polyphenylene sulfide
• Polyphthalamide
• Polypropylene and copolymers
• Polystyrene and copolymers
• Polyurethanes
• Polyvinylidene chloride
• Silicones
• Polysulfones
• Polyethersulfones
• Polyureas
• PVC: Polyvinyl chloride
• Polyvinylchloride (chlorinated)
Types of Plastics Testing Lab
• Polyarylate plastic testing lab
• Polyurethane (PUR) plastic testing lab
• Acrylonitrile Ethylene Styrene (AES) plastic testing lab
• Polyaryletherketone (PAEK) plastic testing lab
• Polyethylene (PE) plastic testing lab
• Thermoplastic Elastomer (TPE) plastic testing lab
• Polyurethane Thermoset Elastomer (TSU) plastic testing lab
• Acrylonitrile Styrene (AS) plastic testing alab
• Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
• Polybutadiene Rubber (PBR) plastic testing lab
• SiliconeAlphamethylstyrene (AMS) plastic testing lab
• Polycaprolactone (PCL) plastic testing lab
• Styrene Acrylonitrile (SAN) plastic testing lab
• Biodegradable Polymers plastic testing lab
• Styrene Acrylonitrile Silicone (SAS) plastic testing lab
• Cellulose Acetate (CA) plastic testing lab
• PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
• Diallyl Phthalate (DAP) plastic testing lab
• Polyether Imide (PEI) plastic testing lab
• Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
• Dicyclopentadiene (DCPD) plastic testing lab
• Epoxy plastic testing and analysis lab
• Polyethylene Naphthalate (PEN) plastic testing lab
• Thermoplastic Polyurethane (TPU) plastic testing lab
• Fluoropolymer plastic testing lab
• Polyimide (PI) plastic testing lab
• FuranPolylactic Acid (PLA) plastic testing lab
• Thermoset (TS) plastic testing lab
• Ionomer plastic testing lab
• Polymethylpentene (PMP) plastic testing lab
• Thermoset Elastomer (TSE) plastic testing lab
• Polyphenylene Ether (PPE) plastic testing lab
• Vinyl Alcohol (VOH) plastic testing lab
• Methyl Cellulose (MC) plastic testing lab
• Polyphenylene Sulfide (PPS) plastic testing lab
• Methyl Methacrylate (MM) plastic testing lab
POLYMER PRODUCTS TESTING LAB
• Polyarylate polymer testing lab
• Polyurethane (PUR) polymer testing lab
• Acrylonitrile Ethylene Styrene (AES) polymer testing lab
• Polyaryletherketone (PAEK) polymer testing lab
• Polyethylene (PE) polymer testing lab
• Thermopolymer Elastomer (TPE) polymer testing lab
• Polyurethane Thermoset Elastomer (TSU) polymer testing lab
• Acrylonitrile Styrene (AS) polymer testing lab
• Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
• Polybutadiene Rubber (PBR) polymer testing lab
• SiliconeAlphamethylstyrene (AMS) polymer testing lab
• Polycaprolactone (PCL) polymer testing lab
• Styrene Acrylonitrile (SAN) polymer testing lab
• Biodegradable Polymers polymer testing lab
• Styrene Acrylonitrile Silicone (SAS) polymer testing lab
• Cellulose Acetate (CA) polymer testing lab
• PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
• Diallyl Phthalate (DAP) polymer testing lab
• Polyether Imide (PEI) polymer testing lab
• Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
• Dicyclopentadiene (DCPD) polymer testing lab
• Epoxy polymer testing lab
• Polyethylene Naphthalate (PEN) polymer testing lab
• Thermopolymer Polyurethane (TPU) polymer testing lab
• Fluoropolymer polymer testing lab
• Polyimide (PI) polymer testing lab
• FuranPolylactic Acid (PLA) polymer testing lab
• Thermoset (TS) polymer testing lab
• Ionomer polymer testing lab
• Polymethylpentene (PMP) polymer testing lab
• Thermoset Elastomer (TSE) polymer testing lab
• Polyphenylene Ether (PPE) polymer testing lab
• Vinyl Alcohol (VOH) polymer testing lab
• Methyl Cellulose (MC) polymer testing lab
• Polyphenylene Sulfide (PPS) polymer testing lab
• Methyl Methacrylate (MM) polymer testing lab
• Polymer product testing lab
• Polymer failure analysis lab
• Polymer reverse engineering lab
• Polymer analytical testing lab
• Mechanical testing of polymer lab
• polymers product testing lab
• Tensile testing of polymer lab
• Compression testing lab
• Bend testing O polymer lab
• Chemical analysis of polymer lab
• Physical testing of polymer lab
• FTIR analysis of polymer lab
• Polymer testing laboratory services
• Thermal analysis of polymer lab
• DSC Analysis of polymer lab
• Failure analysis of polymer lab
• Flexural testing lab
• Shear testing lab
• Intrinsic viscosity of polymers lab
• Inherent viscosity of polymers lab
• Relative viscosity of polymers lab
• Failure Analysis of lab
• Polymer testing lab
RUBBER PRODUCTS TESTING LAB
• Rubber gaskets testing lab
• Rubber pads testing lab
• Rubber O- Rings testing lab
• Rubber granules testing lab
• Rubber sponges testing lab
• Rubber corks testing lab
• Rubber tires testing lab
• Rubber seals testing lab
• Rubber mats testing lab
• Rubber automotive parts testing lab
• Rubber aerospace parts testing lab
• Other Rubber products testing lab
• Rubber shoes testing lab
• Rubber soles testing lab
• Rubber gloves testing lab
• Rubber bellows testing lab
• Allied rubber products testing lab
• Testing and analysis of crumb rubber
• Rubber degradation studies
• Rubber compound analysis
• Rubber product reverse engineering
• Rubber material identification
Types of Rubber Tested
• Natural rubber (NR)
• Synthetic Polyisporene (IR)
• Butyl rubber
• Chlorobutyl rubber (CR)
• Bromo butyl rubber
• Polybutadiene
• Styrene-butadiene rubber (SBR)
• Nitrile butadiene rubber (NBR)
• Hydrogenated nitrile-butadiene rubber
• Carboxylated nitrile butadiene rubber
• Chloroprene rubber
• Ethylene propylene rubber (EPM)
• Ethylene propylene diene rubber (EPDM)
• Epichlorohydrin rubber
• Polyacrylic rubber
• Silicone rubber
• Fluorosilicones
• Fluorphosphazene
• Fluorinated elastomer - Viton
• Fluorinated elastomer - Aflas
• Fluorinated elastomer - Kalrez
• Polysulfides
• Polyether block amides
• Chlorosulfonated polyethylene (Hypalon)
• Ethylene vinyl acetate (EVA)
Thermoplastic Elastomers Tested
• Polyolefin
• Copolyester-ether
• Polyester
• Styrene-Butadiene block copolymers
• Sytrene-Ethylene block copolymers
• Polyester polyurethane
• Polyether polyurethane
Types of Material Testing Laboratory
pvc material testing Laboratory in albania ,
pvc pipe testing Laboratory in albania ,
rubber testing Laboratory in albania ,
polymer testing Laboratory in albania ,
latex testing Laboratory in albania ,
plastic testing Laboratory in albania ,
abs plastic testing Laboratory in albania ,
packaging material testing Laboratory in albania ,
food packaging material testing Laboratory in albania ,
civil material testing Laboratory in albania ,
construction material testing Laboratory in albania ,
spring testing Laboratory in albania ,
wood testing Laboratory in albania ,
paint testing Laboratory in albania ,
bricks testing Laboratory in albania ,
resin testing Laboratory in albania ,
thermoplastic testing Laboratory in albania ,
foam testing Laboratory in albania ,
sponge testing Laboratory in albania ,
heavy metal testing in albania ,
coal testing Laboratory in albania ,
coal coke testing in albania ,
thermal coal testing in albania ,
metallurgical coke testing in albania ,
petrolium coke testing in albania ,
fertilizer testing in albania ,
cement testing Laboratory in albania ,
fly ash testing in albania ,
aggregates testing Laboratory in albania ,
rock testing Laboratory in albania ,
textile testing Laboratory in albania ,
fabric and garment testing Laboratory in albania ,
fabric testing Laboratory in albania ,
asphalt testing Laboratory in albania ,
uts utm testing in albania ,
triaxial rock testing in albania ...
Types of Plastics Testing Laboratory
Polyarylate plastic testing Laboratory in albania ,
Polyurethane (PUR) plastic testing Laboratory in albania ,
Acrylonitrile Ethylene Styrene (AES) plastic testing Laboratory in albania ,
Polyaryletherketone (PAEK) plastic testing Laboratory in albania ,
Polyethylene (PE) plastic testing Laboratory in albania ,
Thermoplastic Elastomer (TPE) plastic testing Laboratory in albania ,
Polyurethane Thermoset Elastomer (TSU) plastic testing Laboratory in albania ,
Acrylonitrile Styrene (AS) plastic testing aLaboratory in albania ,
Acrylonitrile Styrene Acrylate (ASA) plastic testing Laboratory in albania ,
Polybutadiene Rubber (PBR) plastic testing Laboratory in albania ,
SiliconeAlphamethylstyrene (AMS) plastic testing Laboratory in albania ,
Polycaprolactone (PCL) plastic testing Laboratory in albania ,
Styrene Acrylonitrile (SAN) plastic testing Laboratory in albania ,
Biodegradable Polymers plastic testing Laboratory in albania ,
Styrene Acrylonitrile Silicone (SAS) plastic testing Laboratory in albania ,
Cellulose Acetate (CA) plastic testing Laboratory in albania ,
PolyesterStyrene Maleic Anhydride (SMA) plastic testing Laboratory in albania ,
Diallyl Phthalate (DAP) plastic testing Laboratory in albania ,
Polyether Imide (PEI) plastic testing Laboratory in albania ,
Styrenic Vinyl Acrylonitrile (SVA) plastic testing Laboratory in albania ,
Dicyclopentadiene (DCPD) plastic testing Laboratory in albania ,
Epoxy plastic testing and analysis Laboratory in albania ,
Polyethylene Naphthalate (PEN) plastic testing Laboratory in albania ,
Thermoplastic Polyurethane (TPU) plastic testing Laboratory in albania ,
Fluoropolymer plastic testing Laboratory in albania ,
Polyimide (PI) plastic testing Laboratory in albania ,
FuranPolylactic Acid (PLA) plastic testing Laboratory in albania ,
Thermoset (TS) plastic testing Laboratory in albania ,
Ionomer plastic testing Laboratory in albania ,
Polymethylpentene (PMP) plastic testing Laboratory in albania ,
Thermoset Elastomer (TSE) plastic testing Laboratory in albania ,
Polyphenylene Ether (PPE) plastic testing Laboratory in albania ,
Vinyl Alcohol (VOH) plastic testing Laboratory in albania ,
Methyl Cellulose (MC) plastic testing Laboratory in albania ,
Polyphenylene Sulfide (PPS) plastic testing Laboratory in albania ,
Methyl Methacrylate (MM) plastic testing Laboratory in albania ...
POLYMER PRODUCTS TESTING LABORATORY
Polyarylate polymer testing Laboratory in albania ,
Polyurethane (PUR) polymer testing Laboratory in albania ,
Acrylonitrile Ethylene Styrene (AES) polymer testing Laboratory in albania ,
Polyaryletherketone (PAEK) polymer testing Laboratory in albania ,
Polyethylene (PE) polymer testing Laboratory in albania ,
Thermopolymer Elastomer (TPE) polymer testing Laboratory in albania ,
Polyurethane Thermoset Elastomer (TSU) polymer testing Laboratory in albania ,
Acrylonitrile Styrene (AS) polymer testing Laboratory in albania ,
Acrylonitrile Styrene Acrylate (ASA) polymer testing Laboratory in albania ,
Polybutadiene Rubber (PBR) polymer testing Laboratory in albania ,
SiliconeAlphamethylstyrene (AMS) polymer testing Laboratory in albania ,
Polycaprolactone (PCL) polymer testing Laboratory in albania ,
Styrene Acrylonitrile (SAN) polymer testing Laboratory in albania ,
Biodegradable Polymers polymer testing Laboratory in albania ,
Styrene Acrylonitrile Silicone (SAS) polymer testing Laboratory in albania ,
Cellulose Acetate (CA) polymer testing Laboratory in albania ,
PolyesterStyrene Maleic Anhydride (SMA) polymer testing Laboratory in albania ,
Diallyl Phthalate (DAP) polymer testing Laboratory in albania ,
Polyether Imide (PEI) polymer testing Laboratory in albania ,
Styrenic Vinyl Acrylonitrile (SVA) polymer testing Laboratory in albania ,
Dicyclopentadiene (DCPD) polymer testing Laboratory in albania ,
Epoxy polymer testing Laboratory in albania ,
Polyethylene Naphthalate (PEN) polymer testing Laboratory in albania ,
Thermopolymer Polyurethane (TPU) polymer testing Laboratory in albania ,
Fluoropolymer polymer testing Laboratory in albania ,
Polyimide (PI) polymer testing Laboratory in albania ,
FuranPolylactic Acid (PLA) polymer testing Laboratory in albania ,
Thermoset (TS) polymer testing Laboratory in albania ,
Ionomer polymer testing Laboratory in albania ,
Polymethylpentene (PMP) polymer testing Laboratory in albania ,
Thermoset Elastomer (TSE) polymer testing Laboratory in albania ,
Polyphenylene Ether (PPE) polymer testing Laboratory in albania ,
Vinyl Alcohol (VOH) polymer testing Laboratory in albania ,
Methyl Cellulose (MC) polymer testing Laboratory in albania ,
Polyphenylene Sulfide (PPS) polymer testing Laboratory in albania ,
Methyl Methacrylate (MM) polymer testing Laboratory in albania ,
Polymer product testing Laboratory in albania ,
Polymer failure analysis Laboratory in albania ,
Polymer reverse engineering Laboratory in albania ,
Polymer analytical testing Laboratory in albania ,
Mechanical testing of polymer Laboratory in albania ,
polymers product testing Laboratory in albania ,
Tensile testing of polymer Laboratory in albania ,
Compression testing Laboratory in albania ,
Bend testing O polymer Laboratory in albania ,
Chemical analysis of polymer Laboratory in albania ,
Physical testing of polymer Laboratory in albania ,
FTIR analysis of polymer Laboratory in albania ,
Polymer testing Laboratoryoratory services
Thermal analysis of polymer Laboratory in albania ,
DSC Analysis of polymer Laboratory in albania ,
Failure analysis of polymer Laboratory in albania ,
Flexural testing Laboratory in albania ,
Shear testing Laboratory in albania ,
Intrinsic viscosity of polymers Laboratory in albania ,
Inherent viscosity of polymers Laboratory in albania ,
Relative viscosity of polymers Laboratory in albania ,
Failure Analysis of Laboratory in albania ,
Polymer testing Laboratory in albania ...
RUBBER PRODUCTS TESTING LABORATORY
Rubber gaskets testing Laboratory in albania ,
Rubber pads testing Laboratory in albania ,
Rubber O- Rings testing Laboratory in albania ,
Rubber granules testing Laboratory in albania ,
Rubber sponges testing Laboratory in albania ,
Rubber corks testing Laboratory in albania ,
Rubber tires testing Laboratory in albania ,
Rubber seals testing Laboratory in albania ,
Rubber mats testing Laboratory in albania ,
Rubber automotive parts testing Laboratory in albania ,
Rubber aerospace parts testing Laboratory in albania ,
Other Rubber products testing Laboratory in albania ,
Rubber shoes testing Laboratory in albania ,
Rubber soles testing Laboratory in albania ,
Rubber gloves testing Laboratory in albania ,
Rubber bellows testing Laboratory in albania ,
Allied rubber products testing Laboratory in albania ,
Testing and analysis of crumb rubber in albania ,
Rubber degradation studies in albania ,
Rubber compound analysis in albania ,
Rubber product reverse engineering in albania ,
Rubber material identification in albania ...
Types of Rubber Testing Laboratory
Natural rubber (NR) in albania ,
Synthetic Polyisporene (IR) in albania ,
Butyl rubber in albania ,
Chlorobutyl rubber (CR) in albania ,
Bromo butyl rubber in albania ,
Polybutadiene in albania ,
Styrene-butadiene rubber (SBR) in albania ,
Nitrile butadiene rubber (NBR) in albania ,
Hydrogenated nitrile-butadiene rubber in albania ,
Carboxylated nitrile butadiene rubber in albania ,
Chloroprene rubber in albania ,
Ethylene propylene rubber (EPM) in albania ,
Ethylene propylene diene rubber (EPDM) in albania ,
Epichlorohydrin rubber in albania ,
Polyacrylic rubber in albania ,
Silicone rubber in albania ,
Fluorosilicones in albania ,
Fluorphosphazene in albania ,
Fluorinated elastomer - Viton in albania ,
Fluorinated elastomer - Aflas in albania ,
Fluorinated elastomer - Kalrez in albania ,
Polysulfides in albania ,
Polyether block amides in albania ,
Chlorosulfonated polyethylene (Hypalon)
Ethylene vinyl acetate (EVA) in albania ...
list of our services following cities
bajram curri |
bajzë |
ballsh |
berat |
bilisht |
bulqizë |
burrel |
cërrik |
çorovodë |
delvinë |
divjakë |
durrës |
elbasan |
ersekë |
fier |
fierzë |
finiq |
fushë-arrëz |
fushë-krujë |
gjirokastër |
gramsh |
himarë |
kamëz |
kavajë |
këlcyrë |
klos |
konispol |
koplik |
korçë |
krastë |
krrabë |
krujë |
krumë |
kuçovë |
kukës |
kurbnesh |
laç |
leskovik |
lezhë |
libohovë |
librazhd |
lushnjë |
maliq |
mamurras |
manëz |
memaliaj |
milot |
orikum |
patos |
peqin |
përmet |
peshkopi |
pogradec |
poliçan |
prrenjas |
pukë |
reps |
roskovec |
rrëshen |
rrogozhinë |
rubik |
sarandë |
selenicë |
shëngjin |
shijak |
shkodër |
sukth |
tepelenë |
tirana |
ulëz |
ura vajgurore |
vau i dejës |
vlorë |
vorë ....