AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

NACE TRAINING
 
 
 
 
NACE PREPARATORY TRAINING
 
NACE CIP – 1 National Association of Corrosion Engineers
 
The NACE Coating Inspector Programme has set the standard for inspections in the protective coatings industry and is the worlds most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. NACE has recently enhanced the CIP learning experience with more hands-on time with new inspection methods and equipment, better graphic and video presentation as well as additional emphasis on international standards.


NACE CIP – 2 National Association of Corrosion Engineers

The NACE Coating Inspector Programme has set the standard for inspections in the protective coatings industry and is the worlds most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. NACE has recently enhanced the CIP learning experience with more hands-on time with new inspection methods and equipment, better graphic and video presentation as well as additional emphasis on international standards.
 
NACE TRAINING SYLLABUS
 
CIP Level 1 Course Outline
 
  • Introductions, Welcome, Overview
  • Corrosion and Corrosion Control
  • Coatings Introduction
  • Coatings & the Inspector
  • Coating Specification
  • Environmental Test Instruments
  • Inspection Procedures
  • Practice Piece Specification
  • Documentation
  • Pre-job Conference
  • Surface Preparation Overview
  • Instruments Practice Lab
  • Surface Preparation
  • Coating Application by Brush, Roller and Mitt
  • Coating Application by Conventional Spray
  • Coating Application by Airless Spray
  • Nondestructive Test Instruments
  • Surface Preparation
  • Material Safety Data Sheets & Technical Datasheets
  • Panel Inspection
  • Coatings Technology
  •  
    CIP Level 2 Course Outline
     
  • Introduction Team Formation
  • Advanced Corrosion
  • Environmental Controls
  • Advanced Environmental Testing Instrumentation
  • Advanced Environmental Testing Instrumentation -Practice
  • Centrifugal Blast Cleaning
  • Water jetting
  • Interpersonal Relationship Dynamic in the Workplace
  • Safety Awareness
  • Advanced Nondestructive Test Instruments
  • Advanced Nondestructive Test Instruments - Practice
  • Linings and Special Coatings
  • Thick Barrier Linings
  • Advanced Standards and Resources
  • Coating Concrete and Inspection
  • Test Instruments for Coating Concrete
  • Test Instruments for Coating Concrete - Practice
  • Pipeline Mainline and Field Joint Coatings
  • Destructive Instruments and Tests
  • Surface Preparation, Coating and Inspection of Special Substrates
  • Maintenance Coating Operations
  • Non Liquid Coatings
  • Coating Surveys
  • Specialized Tests and Test Equipment
  • Coating Types, Failure Modes, and Inspection Criteria
  •  
    BGAS TRAINING
     
     
    BGAS PREPARATORY TRAINING
     
  • This course will cover corrosion, specified coating conditions, surface preparation methods and standards, surface contaminants and tests for detection. You will also learn about coating technology, film thickness, coal tar enamels, special situations, hot applied tapes, cold applied laminate tapes, grease based tapes, and self-adhesive overwrap tapes.
  •  
  • You will also be taught about polyethylene cladding, fillers, mastics and putties, heat shrinkable plastics, powder coatings, urethane MCLs, holiday detection, concrete coatings, and internal coatings. The course also offers information on cathodic protection, stages of pipeline construction, handling, transport and storage, pipeline surveys, health and safety, coating faults, and working practices and quality.
  •  
  • BGAS-CSWIP Painting Inspector - Grade 2
  • BGAS SITE COATING INSPECTOR
  • Painting Inspector Grade 1
  • Painting Inspector Grade 2
  • Painting Supervisor Level 4
  •  

    BGAS PAINTING INSPECTOR GRADE 3/2

     

    Suitable for:

     
    Candidates with or without experience in the Painting Inspection Industry. Candidates will be assessed during the course and advised on either grade 3 or 2 exam route dependent on their progress during training.
     

    Course Content:

     
    Corrosion theory; surface preparation; surface contaminants and tests; paint constituents and technology; solutions and dispersions; drying and curing properties and performance; specified painting conditions; cathodic protection; holiday/pinhole detection; paint-application methods; paint/paint film testing; paint identification; metal coatings; paint faults; colour; inspection methods; specification requirements; health and safety and working practices.
     

    Course Objectives:

     
     
  • To recognise and identify the benefits/disadvantages of paint systems

  • To understand the importance of surface preparation

  • To understand methods of application and testing

  • To understand paint system inspections

  • To interpret requirements of standards

  • To meet the syllabus requirements for the BGAS-CSWIP Painting Inspector Examination.
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs.

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Site Coatings Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on this day (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examination on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
    No formal entry qualifications required, but a knowledge of dry abrasive blast cleaning or industrial paint application techniques would be advantageous
     

    BGAS SITE COATING INSPECTOR

     

    Suitable for:

     
  • Candidates with or without previous experience in site coatings inspection wishing to attain BGAS-CSWIP Approval as a Site Coatings Inspector.

    Suitable for individuals engaged in the inspection and coating of new and existing pipelines. This approval is very useful to welding inspectors as it can extend their working time capability on pipelines projects.
  •  

    Course Content:

     
    Corrosion, specified coating conditions; surface preparation methods and standards; surface contaminants and tests for detection; coating technology; film thickness; coal tar enamels; special situations; hot applied tapes; cold applied laminate tapes; grease based tapes; self-adhesive overwrap tapes; polyethylene cladding; fillers, mastics and putties; heat shrinkable plastics; powder coatings; urethane MCLs; holiday detection; concrete coatings; internal coatings; cathodic protection; stages of pipeline construction; handling, transport and storage; pipeline surveys, health and safety; coating faults; working practices and quality.
     

    Course Objectives:

     
     

    AWS Course Contents :

     
  • To understand the principles of pipeline coatings
  • To understand the importance of surface preparation
  • To appreciate the difficulties associated with pipeline site coating
  • To understand the practical methods of testing and inspection
  • To interpret the requirements of standards
  • To meet the syllabus requirements for the BGAS-CSWIP Site Coatings Inspector examination
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Paint Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on these days (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examinations on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
  • No formal entry qualifications required, but a knowledge of pipeline fabrication techniques, safe working practices, and a general understanding of coating application would be advantageous.
  •  
    List of welding courses
     
    nace training in philippines , nace painting coating inspector training in philippines , nace coating inspector training in philippines , National Association of Corrosion Engineers training in philippines , nace certification course in philippines , bgas training in philippines , bgas painting inspector training in philippines , bgas course in philippines , cswip training in philippines , cswip welding inspector training in philippines , cswip course in philippines , aws training in philippines , American Welding Society training in philippines , aws cwi training in philippines , aws welding training in philippines , American Welding Society course in philippines , arc welding training in philippines , Flux-Cored Arc Welding (FCAW) training in philippines , tig welding training in philippines , TIG – Gas Tungsten Arc Welding (GTAW) training in philippines , mig welding training in philippines , MIG Gas Metal Arc Welding (GMAW) training in philippines , Stick Shielded Metal Arc Welding (SMAW) training in philippines , Laser Beam Welding training in philippines , Electron-Beam Welding training in philippines Plasma Arc Welding training in philippines , Atomic Hydrogen Welding training in philippines , Electroslag welding training in philippines , fcam welding training in philippines , gtaw welding training in philippines , gmaw welding training in philippines , smaw welding training in philippines , aluminium welding training in philippines , al welding training in philippines , ss welding training in philippines , stainless steel welding training in philippines ...
     
    list of our services following cities
     
    Afghanistan | Africa | Albania | Algeria | Americas | Andorra | Angola | Anguilla | Antigua and Barbuda | Argentina | Armenia | Aruba | Asia | Australia | Australia and New Zealand | Austria | Azerbaijan | Bahamas | Bahrain | Bangladesh | Barbados | Belarus | Belgium | Belize | Benin | Bermuda | Bhutan | Bolivia (Plurinational State of) | Bosnia and Herzegovina | Botswana | Brazil | British Virgin Islands | Brunei Darussalam | Bulgaria | Burkina Faso | Burundi | Cabo Verde | Cambodia | Cameroon | Canada | Caribbean | Cayman Islands | Central African Republic | Central America | Central Asia | Chad | Chile | China, Hong Kong SAR | China, Macao Special Administrative Region | China, People's Republic of | Colombia | Comoros | Congo | Cook Islands | Costa Rica | Côte d'Ivoire | Croatia | Cuba | Curaçao | Cyprus | Czechia | Democratic People's Republic of Korea | Democratic Republic of the Congo | Denmark | Djibouti | Dominica | Dominican Republic | Eastern Africa | Eastern Asia | Eastern Europe | Ecuador | Egypt | El Salvador | Equatorial Guinea | Eritrea | Estonia | Ethiopia | Europe | Fiji | Finland | Former Czechoslovakia | Former Ethiopia | Former Netherlands Antilles | Former Sudan | Former USSR | Former Yugoslavia | France | French Polynesia | Gabon | Gambia | Georgia | Germany | Ghana | Greece | Greenland | Grenada | Guatemala | Guinea | Guinea-Bissau | Guyana | Haiti | Honduras | Hungary | Iceland | India | Indonesia | Iran, Islamic Republic of | Iraq | Ireland | Israel | Italy | Jamaica | Japan | Jordan | Kazakhstan | Kenya | Kingdom of Eswatini | Kiribati | Kosovo | Kuwait | Kyrgyzstan | Lao People's Democratic Republic | Latin America and the Caribbean | Latvia | Lebanon | Lesotho | Liberia | Libya | Liechtenstein | Lithuania | Luxembourg | Madagascar | Malawi | Malaysia | Maldives | Mali | Malta | Marshall Islands | Mauritania | Mauritius | Melanesia | Mexico | Micronesia | Micronesia (Federated States of) | Middle Africa | Monaco | Mongolia | Montenegro | Montserrat | Morocco | Mozambique | Myanmar | Namibia | Nauru | Nepal | Netherlands | New Caledonia | New Zealand | Nicaragua | Niger | Nigeria | Northern Africa | Northern America | Northern Europe | Norway | Oceania | Oman | Pakistan | Palau | Panama | Papua New Guinea | Paraguay | Peru | Philippines | Poland | Polynesia | Portugal | Puerto Rico | Qatar | Republic of Korea | Republic of Moldova | Republic of North Macedonia | Romania | Russian Federation | Rwanda | Saint Kitts and Nevis | Saint Lucia | Saint Vincent and the Grenadines | Samoa | San Marino | Sao Tome and Principe | Saudi Arabia | Senegal | Serbia | Seychelles | Sierra Leone | Singapore | Sint Maarten (Dutch part) | Slovakia | Slovenia | Solomon Islands | Somalia | South Africa | South America | South Sudan | South-Eastern Asia | Southern Africa | Southern Asia | Southern Europe | Spain | Sri Lanka | State of Palestine | Sub-Saharan Africa | Sudan | Suriname | Sweden | Switzerland | Syrian Arab Republic | Tajikistan | Thailand | Timor-Leste | Togo | Tonga | Trinidad and Tobago | Tunisia | Turkey | Turkmenistan | Turks and Caicos Islands | Tuvalu | Uganda | Ukraine | United Arab Emirates | United Kingdom of Great Britain and Northern Ireland | United Republic of Tanzania: Mainland | United Republic of Tanzania: Zanzibar | United States | Uruguay | Uzbekistan | Vanuatu | Venezuela (Bolivarian Republic of) | Viet Nam | Western Africa | Western Asia | Western Europe | World | Yemen | Yemen: Former Democratic Yemen | Yemen: Former Yemen Arab Republic | Zambia | Zimbabwe ...
     
    list of our services following city and District
     
    Alaminos | Angeles | Antipolo | Bacolod | Bacoor | Bago | Baguio | Bais | Balanga | Batac | Batangas City | Bayawan | Baybay | Bayugan | Biñan | Bislig | Bogo | Borongan | Butuan | Cabadbaran | Cabanatuan | Cabuyao | Cadiz | Cagayan de Oro | Calamba | Calapan | Calbayog | Caloocan | Candon | Canlaon | Carcar | Catbalogan | Cauayan | Cavite City | Cebu City | Cotabato City | Dagupan | Danao | Dapitan | Dasmariñas | Davao City | Digos | Dipolog | Dumaguete | El Salvador | Escalante | Gapan | General Santos | General Trias | Gingoog | Guihulngan | Himamaylan | Ilagan | Iligan | Iloilo City | Imus | Iriga | Isabela | Kabankalan | Kidapawan | Koronadal | La Carlota | Lamitan | Laoag | Lapu Lapu | Las Piñas | Legazpi | Ligao | Lipa | Lucena | Maasin | Mabalacat | Makati | Malabon | Malaybalay | Malolos | Mandaluyong | Mandaue | Manila | Marawi | Marikina | Masbate City | Mati | Meycauayan | Muñoz | Muntinlupa | Naga | Naga | Navotas | Olongapo | Ormoc | Oroquieta | Ozamiz | Pagadian | Palayan | Panabo | Parañaque | Pasay | Pasig | Passi | Puerto Princesa | Quezon City | Roxas | Sagay | Samal | San Carlos | San Carlos | San Fernando | San Fernando | San Jose | San Jose del Monte | San Juan | San Pablo | San Pedro | Santa Rosa | Santo Tomas | Santiago | Silay | Sipalay | Sorsogon City | Surigao City | Tabaco | Tabuk | Tacloban | Tacurong | Tagaytay | Tagbilaran | Taguig | Tagum | Talisay | Talisay | Tanauan | Tandag | Tangub | Tanjay | Tarlac City | Tayabas | Toledo | Trece Martires | Tuguegarao | Urdaneta | Valencia | Valenzuela | Victorias | Vigan | Zamboanga City ...
     
    list of our services following urban Areas
     
    Pangasinan | Pampanga | Rizal | Negros Occidental | Cavite | Negros Occidental | Benguet | Negros Oriental | Bataan | Ilocos Norte | Batangas | Negros Oriental | Leyte | Agusan del Sur | Laguna | Surigao del Sur | Cebu | Eastern Samar | Agusan del Norte | Agusan del Norte | Nueva Ecija | Laguna | Negros Occidental | Misamis Oriental | Laguna | Oriental Mindoro | Samar | Ilocos Sur | Negros Oriental | Cebu | Samar | Isabela | Cavite | Cebu | Maguindanao | Pangasinan | Cebu | Zamboanga del Norte | Cavite | Davao del Sur | Davao del Sur | Zamboanga del Norte | Negros Oriental | Misamis Oriental | Negros Occidental | Nueva Ecija | South Cotabato | Cavite | Misamis Oriental | Negros Oriental | Negros Occidental | Isabela | Lanao del Norte | Iloilo | Cavite | Camarines Sur | Basilan | Negros Occidental | Cotabato | South Cotabato | Negros Occidental | Basilan | Ilocos Norte | Cebu | Albay | Albay | Batangas | Quezon | Southern Leyte | Pampanga | Bukidnon | Bulacan | Cebu | Lanao del Sur | Masbate | Davao Oriental | Bulacan | Nueva Ecija | Camarines Sur | Cebu | Zambales | Leyte | Misamis Occidental | Misamis Occidental | Zamboanga del Sur | Nueva Ecija | Davao del Norte | Iloilo | Palawan | Capiz | Negros Occidental | Davao del Norte | Negros Occidental | Pangasinan | La Union | Pampanga | Nueva Ecija | Bulacan | Laguna | Laguna | Laguna | Batangas | Isabela | Negros Occidental | Negros Occidental | Sorsogon | Surigao del Norte | Albay | Kalinga | Leyte | Sultan Kudarat | Cavite | Bohol | Davao del Norte | Cebu | Negros Occidental | Batangas | Surigao del Sur | Misamis Occidental | Negros Oriental | Tarlac | Quezon | Cebu | Cavite | Cagayan | Pangasinan | Bukidnon | Negros Occidental | Ilocos Sur | Zamboanga del Sur ...