AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

METAL TESTING (CHEMICAL ANALYSIS FOR WET)
 
 

 

Ferro Alloys
 
  • 1. Ferro Chromium complete Chromium only - IS: 13452 (Pt.1-7)
  • 2. Ferro Manganese complete Manganese only - IS: 13938:1,3,4 IS: 1559:1961
  • 3. Ferro Molybdenum complete Molybdenum only - IS: 12614
  • 4. Ferro boron Boron only - IS: 3013 IS:3296
  • 5. Ferro Silicon complete Silicon only - IS: 1559 (Pt.1-7)
  • 6. Ferro silico chromium complete Chromium and Silicon only - IS 2024 / IS 2020
  • 7. Ferro silico magnesium Silicon and magnesium only - IS: 13164 / IS: 14529
  • 8. Ferro silico zirconium Silicon and zirconium and iron only - IS: 3011 / IS: 15396
  • 9. Ferro Titanium complete Titanium only - IS: 1468: 2000 / IS: 13840(Pt. 1-5):1999 Primary elements Incdg. supplementary Titanium only
  • 10. Ferro Tungsten complete Tungsten only - IS: 1467:1993 / IS: 1559:1961
  • 11. Ferro Vanadium complete Vanadium only - IS: 1466-1985 / IS: 1559:1961
  • 12. Ferro phosphorus Complete (requires C and P only) Phosphorus only - IS: 1471 / IS: 1559:1961
  • 13. Silico manganese Complete Silicon and manganese only - IS: 1470 / IS: 1559:1961
  •  
  • 01 Physical Tests As per - IS Standard
  • 02 Chemical Test - IS: 504; IS: 228;IS: 440/IS: 3685/IS 4027;IS: 12308(PT 4) IS: 228
  •  
  • 1. C.I. Pipe - IS: 1536 (Except hydraulic pressure test)
  • 2. MS Pipe - IS: 1161 IS: 3589 & IS: 3601
  • 3. Galvanized plain/corrugated Sheet w/o base metal tests with base metal tests - IS: 277 IS: 513 /1079
  • 4. MS Sheet CR/HR - IS 513/1079
  • 5. Pig Lead - IS 782
  • 6. Pipe Black plain End Galvanized Plain End Galvanized screwed Socketed - IS: 1239
  • 7. Structural Steel - IS: 2062
  • 8. Structural Steel strictly as per BIS w/o impact test with impact test - IS: 2062
  • 9. TOR / TMT Steel - IS: 1786
  • 10. TOR/TMT Steel Chemical test only(C,S,P) - IS: 1786
  • 11. TOR /TMT steel Including Pull out & Nitrogen Test - IS: 1786 /2770 (pt.1)
  • 12. TOR /TMT Steel Physical test only w/o pullout - IS: 1786
  •  
    Plating Testing Lab
     
  • 1. Anodic Coating Thickness - IS 5523/IS 6012
  • 2. Chromae conversion coating - IS 11232/IS 9838
  • 3. Electro Plating Thickness (Cu ,Ni, Cr, Cd, Ag, Sn, Zn) each - IS 3203
  • 4. Galvanizing Adhesion - IS:2633:1998
  • 5. Galvanizing Thickness - IS: 4826:1998
  • 6. Galvanizing Uniformity - IS:2633:1998
  • 7. Mercurous Nitrate Test - IS:2305:1998
  • 8. Paint Coating - IS 101 P3S1
  • 9. Phosphate conversion Coating - IS:14503/IS 9838
  • 10. Powder Coating - IS 13871
  • 11. Salt Spray Test for 24 hours Additional 24 hours or part - IS:9844:1999
  •  

    Ferrous & Non - Ferrous Materials

     

    Structural Materials

     

    Alloys

     

    Ferro Alloys

     

    Pipes

     

    Brass

     

    Bronze

     

    Precious Metals

     

    Corrosion Studies

     

    Metallic Coatings