AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

BGAS TRAINING
 
 
 
 
BGAS Painting Inspector Certification
 
  • This course will cover corrosion, specified coating conditions, surface preparation methods and standards, surface contaminants and tests for detection. You will also learn about coating technology, film thickness, coal tar enamels, special situations, hot applied tapes, cold applied laminate tapes, grease based tapes, and self-adhesive overwrap tapes.
  •  
  • You will also be taught about polyethylene cladding, fillers, mastics and putties, heat shrinkable plastics, powder coatings, urethane MCLs, holiday detection, concrete coatings, and internal coatings. The course also offers information on cathodic protection, stages of pipeline construction, handling, transport and storage, pipeline surveys, health and safety, coating faults, and working practices and quality.
  •  
  • BGAS-CSWIP Painting Inspector - Grade 2
  • BGAS SITE COATING INSPECTOR
  • Painting Inspector Grade 1
  • Painting Inspector Grade 2
  • Painting Supervisor Level 4
  •  

    BGAS PAINTING INSPECTOR GRADE 3/2

     

    Suitable for:

     
    Candidates with or without experience in the Painting Inspection Industry. Candidates will be assessed during the course and advised on either grade 3 or 2 exam route dependent on their progress during training.
     

    Course Content:

     
    Corrosion theory; surface preparation; surface contaminants and tests; paint constituents and technology; solutions and dispersions; drying and curing properties and performance; specified painting conditions; cathodic protection; holiday/pinhole detection; paint-application methods; paint/paint film testing; paint identification; metal coatings; paint faults; colour; inspection methods; specification requirements; health and safety and working practices.
     

    Course Objectives:

     
     
  • To recognise and identify the benefits/disadvantages of paint systems

  • To understand the importance of surface preparation

  • To understand methods of application and testing

  • To understand paint system inspections

  • To interpret requirements of standards

  • To meet the syllabus requirements for the BGAS-CSWIP Painting Inspector Examination.
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs.

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Site Coatings Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on this day (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examination on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
    No formal entry qualifications required, but a knowledge of dry abrasive blast cleaning or industrial paint application techniques would be advantageous
     

    BGAS SITE COATING INSPECTOR

     

    Suitable for:

     
  • Candidates with or without previous experience in site coatings inspection wishing to attain BGAS-CSWIP Approval as a Site Coatings Inspector.

    Suitable for individuals engaged in the inspection and coating of new and existing pipelines. This approval is very useful to welding inspectors as it can extend their working time capability on pipelines projects.
  •  

    Course Content:

     
    Corrosion, specified coating conditions; surface preparation methods and standards; surface contaminants and tests for detection; coating technology; film thickness; coal tar enamels; special situations; hot applied tapes; cold applied laminate tapes; grease based tapes; self-adhesive overwrap tapes; polyethylene cladding; fillers, mastics and putties; heat shrinkable plastics; powder coatings; urethane MCLs; holiday detection; concrete coatings; internal coatings; cathodic protection; stages of pipeline construction; handling, transport and storage; pipeline surveys, health and safety; coating faults; working practices and quality.
     

    Course Objectives:

     
     

    AWS Course Contents :

     
  • To understand the principles of pipeline coatings
  • To understand the importance of surface preparation
  • To appreciate the difficulties associated with pipeline site coating
  • To understand the practical methods of testing and inspection
  • To interpret the requirements of standards
  • To meet the syllabus requirements for the BGAS-CSWIP Site Coatings Inspector examination
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Paint Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on these days (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examinations on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
  • No formal entry qualifications required, but a knowledge of pipeline fabrication techniques, safe working practices, and a general understanding of coating application would be advantageous.
  •  
    List of welding courses
     
    bgas training in chennai , bgas painting inspector training in chennai , bgas course in chennai , cswip training in chennai , cswip welding inspector training in chennai , cswip course in chennai , aws training in chennai , American Welding Society training in chennai , aws cwi training in chennai , aws welding training in chennai , American Welding Society course in chennai , arc welding training in chennai , Flux-Cored Arc Welding (FCAW) training in chennai , tig welding training in chennai , TIG – Gas Tungsten Arc Welding (GTAW) training in chennai , mig welding training in chennai , MIG Gas Metal Arc Welding (GMAW) training in chennai , Stick Shielded Metal Arc Welding (SMAW) training in chennai , Laser Beam Welding training in chennai , Electron-Beam Welding training in chennai Plasma Arc Welding training in chennai , Atomic Hydrogen Welding training in chennai , Electroslag welding training in chennai , fcam welding training in chennai , gtaw welding training in chennai , gmaw welding training in chennai , smaw welding training in chennai , aluminium welding training in chennai , al welding training in chennai , ss welding training in chennai , stainless steel welding training in chennai ,