AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

NACE TRAINING
 
 
 
 
NACE PREPARATORY TRAINING
 
NACE CIP – 1 National Association of Corrosion Engineers
 
The NACE Coating Inspector Programme has set the standard for inspections in the protective coatings industry and is the worlds most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. NACE has recently enhanced the CIP learning experience with more hands-on time with new inspection methods and equipment, better graphic and video presentation as well as additional emphasis on international standards.


NACE CIP – 2 National Association of Corrosion Engineers

The NACE Coating Inspector Programme has set the standard for inspections in the protective coatings industry and is the worlds most recognized coating inspector certification program. CIP is the first international certification program designed to improve the overall quality of inspections performed, and it continues to provide the most complete training curriculum, producing top-notch inspectors for the industry. NACE has recently enhanced the CIP learning experience with more hands-on time with new inspection methods and equipment, better graphic and video presentation as well as additional emphasis on international standards.
 
NACE TRAINING SYLLABUS
 
CIP Level 1 Course Outline
 
  • Introductions, Welcome, Overview
  • Corrosion and Corrosion Control
  • Coatings Introduction
  • Coatings & the Inspector
  • Coating Specification
  • Environmental Test Instruments
  • Inspection Procedures
  • Practice Piece Specification
  • Documentation
  • Pre-job Conference
  • Surface Preparation Overview
  • Instruments Practice Lab
  • Surface Preparation
  • Coating Application by Brush, Roller and Mitt
  • Coating Application by Conventional Spray
  • Coating Application by Airless Spray
  • Nondestructive Test Instruments
  • Surface Preparation
  • Material Safety Data Sheets & Technical Datasheets
  • Panel Inspection
  • Coatings Technology
  •  
    CIP Level 2 Course Outline
     
  • Introduction Team Formation
  • Advanced Corrosion
  • Environmental Controls
  • Advanced Environmental Testing Instrumentation
  • Advanced Environmental Testing Instrumentation -Practice
  • Centrifugal Blast Cleaning
  • Water jetting
  • Interpersonal Relationship Dynamic in the Workplace
  • Safety Awareness
  • Advanced Nondestructive Test Instruments
  • Advanced Nondestructive Test Instruments - Practice
  • Linings and Special Coatings
  • Thick Barrier Linings
  • Advanced Standards and Resources
  • Coating Concrete and Inspection
  • Test Instruments for Coating Concrete
  • Test Instruments for Coating Concrete - Practice
  • Pipeline Mainline and Field Joint Coatings
  • Destructive Instruments and Tests
  • Surface Preparation, Coating and Inspection of Special Substrates
  • Maintenance Coating Operations
  • Non Liquid Coatings
  • Coating Surveys
  • Specialized Tests and Test Equipment
  • Coating Types, Failure Modes, and Inspection Criteria
  •  
    BGAS TRAINING
     
     
    BGAS PREPARATORY TRAINING
     
  • This course will cover corrosion, specified coating conditions, surface preparation methods and standards, surface contaminants and tests for detection. You will also learn about coating technology, film thickness, coal tar enamels, special situations, hot applied tapes, cold applied laminate tapes, grease based tapes, and self-adhesive overwrap tapes.
  •  
  • You will also be taught about polyethylene cladding, fillers, mastics and putties, heat shrinkable plastics, powder coatings, urethane MCLs, holiday detection, concrete coatings, and internal coatings. The course also offers information on cathodic protection, stages of pipeline construction, handling, transport and storage, pipeline surveys, health and safety, coating faults, and working practices and quality.
  •  
  • BGAS-CSWIP Painting Inspector - Grade 2
  • BGAS SITE COATING INSPECTOR
  • Painting Inspector Grade 1
  • Painting Inspector Grade 2
  • Painting Supervisor Level 4
  •  

    BGAS PAINTING INSPECTOR GRADE 3/2

     

    Suitable for:

     
    Candidates with or without experience in the Painting Inspection Industry. Candidates will be assessed during the course and advised on either grade 3 or 2 exam route dependent on their progress during training.
     

    Course Content:

     
    Corrosion theory; surface preparation; surface contaminants and tests; paint constituents and technology; solutions and dispersions; drying and curing properties and performance; specified painting conditions; cathodic protection; holiday/pinhole detection; paint-application methods; paint/paint film testing; paint identification; metal coatings; paint faults; colour; inspection methods; specification requirements; health and safety and working practices.
     

    Course Objectives:

     
     
  • To recognise and identify the benefits/disadvantages of paint systems

  • To understand the importance of surface preparation

  • To understand methods of application and testing

  • To understand paint system inspections

  • To interpret requirements of standards

  • To meet the syllabus requirements for the BGAS-CSWIP Painting Inspector Examination.
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs.

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Site Coatings Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on this day (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examination on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
    No formal entry qualifications required, but a knowledge of dry abrasive blast cleaning or industrial paint application techniques would be advantageous
     

    BGAS SITE COATING INSPECTOR

     

    Suitable for:

     
  • Candidates with or without previous experience in site coatings inspection wishing to attain BGAS-CSWIP Approval as a Site Coatings Inspector.

    Suitable for individuals engaged in the inspection and coating of new and existing pipelines. This approval is very useful to welding inspectors as it can extend their working time capability on pipelines projects.
  •  

    Course Content:

     
    Corrosion, specified coating conditions; surface preparation methods and standards; surface contaminants and tests for detection; coating technology; film thickness; coal tar enamels; special situations; hot applied tapes; cold applied laminate tapes; grease based tapes; self-adhesive overwrap tapes; polyethylene cladding; fillers, mastics and putties; heat shrinkable plastics; powder coatings; urethane MCLs; holiday detection; concrete coatings; internal coatings; cathodic protection; stages of pipeline construction; handling, transport and storage; pipeline surveys, health and safety; coating faults; working practices and quality.
     

    Course Objectives:

     
     

    AWS Course Contents :

     
  • To understand the principles of pipeline coatings
  • To understand the importance of surface preparation
  • To appreciate the difficulties associated with pipeline site coating
  • To understand the practical methods of testing and inspection
  • To interpret the requirements of standards
  • To meet the syllabus requirements for the BGAS-CSWIP Site Coatings Inspector examination
  •  

    Additional Information:

     

    Candidates MUST bring:

     
  • 2 passport sized photographs

  • a valid eyesight certificate from a doctor or an optician showing satisfactory eyesight for near vision, permitting reading a minimum of Times Roman N4, or equivalent type and size letters, at not less than 300mm on a standard test chart for near vision, in at least one eye, corrected or uncorrected. Candidates for the painting inspector will be required to have had a colour perception assessment by the Ishihara 24 plate test or an equivalent.

  • a completed application form and full examination fee
  •  

    NOTE:

     
  • Renewal can only be made within three months of the expiry date. Any application received after three months of the expiry cannot be considered and can only be renewed by re-examination.

    If the applicant is a holder of BGAS-CSWIP Paint Inspector Approval, it should be noted that day 1 of the syllabus will cover items which the applicant may be already conversant in and therefore attendance on these days (although strongly recommended) is entirely at their discretion. Course duration may then be only 4 days. However, should the applicant decide against attendance on this day, there will be no reduction in course fee.

    Four day training course with examinations on day 5, or for less experienced candidates there is the opportunity to take the examination the following week.
  •  

    ENTRY REQUIREMENTS:

     
  • No formal entry qualifications required, but a knowledge of pipeline fabrication techniques, safe working practices, and a general understanding of coating application would be advantageous.
  •  
    List of welding courses
     
    nace training in belize , nace painting coating inspector training in belize , nace coating inspector training in belize , National Association of Corrosion Engineers training in belize , nace certification course in belize , bgas training in belize , bgas painting inspector training in belize , bgas course in belize , cswip training in belize , cswip welding inspector training in belize , cswip course in belize , aws training in belize , American Welding Society training in belize , aws cwi training in belize , aws welding training in belize , American Welding Society course in belize , arc welding training in belize , Flux-Cored Arc Welding (FCAW) training in belize , tig welding training in belize , TIG – Gas Tungsten Arc Welding (GTAW) training in belize , mig welding training in belize , MIG Gas Metal Arc Welding (GMAW) training in belize , Stick Shielded Metal Arc Welding (SMAW) training in belize , Laser Beam Welding training in belize , Electron-Beam Welding training in belize Plasma Arc Welding training in belize , Atomic Hydrogen Welding training in belize , Electroslag welding training in belize , fcam welding training in belize , gtaw welding training in belize , gmaw welding training in belize , smaw welding training in belize , aluminium welding training in belize , al welding training in belize , ss welding training in belize , stainless steel welding training in belize ...
     
    list of our services following cities
     
    belize city | san ignacio | orange walk | belmopan | dangriga | corozal | san pedro | benque viejo el carmen | punta gorda | placencia | shipyard | valley of peace | belize city | orange walk | belmopan | san ignacio | san pedro | dangriga | corozal | ladyville | punta gorda | trial farm | bullet tree falls | santa familia | consejo | maya beach | camelote | benque viejo el carmen | san estevan | san pablo | guinea grass | blue creek village | salt creek | nago bank | more force | white hill | isabella | flowers bank | hattieville | lime walk | sand hill | egypt | bermudian landing | scotland | corozalito | maskall | biscayne | butcher burns | bakers | cedar bank | davis bank | santana | bomba | burrell boom | lucky strike | little bermudian landing | washing tree | ferguson bank | grace bank | watters bank | rockstone pond | caye corker | may pen | rockville | gales point | bocotora | tropical park | cowhead creek | joe wagner boom | freetown sibun | chicago | gracy rock bank | bob eiley | santiago jalacte | rancho | bacalar chico | san antonio | estrella | pueblo nuevo | chunch | carolina | benque viejo | campa pita | shipstern | yo chen | cowpen | cocos | cristo rey | remate | chan chen | tacistal | san francisco | puebla nueva | santa rita | san pedro | rancho corozal | villa alfonso | aventura | chunox | san joaquin | patchchacan | concepcion | libertad | chacan chac mol | calcutta | shipstern landing | hill bank | louisville | san andres | sarteneja | laguna | san fernando ....