FOAM TESTING
• Refractive index
• Specific gravity
• pH
• Foam quality
• Viscosity
• Film formation
• Sedimentation
FIRE FIGHTING FOAM TESTING
• Appearance, visual
• pH, ASTM D1293, EN 1568
• Density, ASTM D4052
• Viscosity ISO 3104, sediment EN 1568-C
• Drainage time, EN 1568-G
• Expansion ratio, EN 1568-G
• Fire test performance, "burn back test", EN 1568-I
• Refractive index, ISO 5561
• Refractive index, ASTM D1218, ISO 5661
• Resistance to polar solvents
• Solution concentration
• Pour Point ASTM D5950
• Cloud point ASTM D5773
• Freeze-point
• Surface tension, ISO 304, ASTM D-971
• Temperature conditioning, EN 1568-H
TYPES FIRE FIGHTING FOAM
• Protein foam concentrates (P)
• Fluoroprotein foam concentrates (FP)
• Synthetic foam concentrates (S)
• Alcohol resistant foam concentrates (AR)
• Aqueous film-forming foam concentrates (AFFF)
• Film-forming fluoroprotein foam concentrates (FFFP)
THERMOPLASTIC TESTING
Thermoplastic Materials
• ABS Thermoplastic Testing lab
• Acrylic Thermoplastic Polymer Testing lab
• Polybenzimidazole Thermoplastic Polymer Testing lab
• Polyethylene Thermoplastic Polymers Testing lab
• Homopolymer Thermoplastic Testing lab
• Copolymer Thermoplastic Testing lab
• Polyester Thermoplastic Testing lab
• Polyurethane Thermoplastic Polymer Testing lab
• Styrene Acrylonitrile Polymer Testing lab
Thermoplastic Physical property testing
Physical property tests measure the molecular structure of the material which can often effect the physical properties. The most important properties for measurement include:
• Specific Gravity (ASTM D792):
The ratio of the density of a liquid or solid mass to the density of water at a specific temperature.
• Hardness (ASTM D2240):
The resistance of a plastic material to indentation. It is measured on a durometer machine which led to the industry to call hardness “duro.” Normal specification is plus or minus 3 and three scales are used: Shore A for flexible, Shore C for semi rigid and Shore D for rigid. Usually a delayed reading of 10 or 15 seconds is used.
• Tensile Strength (ASTM D638):
The maximum nominal stress sustained by a test specimen being pulled from both ends, at a specific temperature and a specific rate of stretching. Specification is a minimum amount in Pascals, (10-6 N/mm2).
• Elongation (ASTM D638):
The amount of increased length of a material until breakage. Specification is a minimum percentage.
• Flexural properties (three point bending method) (UNE-EN ISO 178):
The three point bending flexural test provides values for the modulus of elasticity in bending, flexural stress, flexural strain and the flexural stress-strain response of the material. The main advantage of a three point flexural test is the ease of the specimen preparation and testing.
• Impact Energy-Charpy ( UNE-EN ISO 179):
The Charpy impact test, also known as the Charpy V-notch test, is a standardized high strain-rate test which determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material’s notch toughness and acts as a tool to study temperature-dependent ductile-brittle transition.
RESIN TESTING
Chemical and Physical Analysis of Resin Testing Lab
Chemical Analysis of Resin
• Ion exchange capacities by ASTM and other methods
• Carbonate/bicarbonate content (including organically-bound and ionic C-14)
• Ionic composition
• Resin flow testing facilities (kinetics and operating capacity under once-through and recirculation modes for engineering scale-up projections)
• Natural and process-induced fouling
Physical Analysis of Resin
• Slurriability and separability of mixed bed resins
• Wet particle size analysis
• Crush strength (friability – Chatillon) and attrition
• Thermal and oxidation resistance
• Attrition
• Specialized sampling and analysis capabilities for radioactive process resins and waste resins
• Quality assurance and quality control testing of new resins
PLASTIC TESTING
Types of Plastics Testing Offered:
• ABS Plastic Testing Lab
• Polypropylene Testing
• Polyethylene Testing
• PVC Testing lab
• Nylon 6-6 Testing lab
• PTFE Testing Services
• PET Testing Services
• ABS/PC alloys Plastic Testing Lab
• Acetal Plastic Testing Lab
• Acrylic Testing Lab
• Acrylic-styrene copolymer
• Acrylonitrile
• Cellulose Acetate
• Cellulose Acetate Butanal
• Cellulose Acetate Propionate
• Chlorinated polyethylene
• Epoxy resins
• Ethylene vinyl alcohol
• Fluoroplastic – PTFE
• Fluoroplastic – FEP
• Fluoroplastic – PVDF
• Ionomer
• Polyacrylether ketone
• Polyetheether ketone
• Liquid Crystal Polymer
• Melamine formaldehyde
• Phenolics
• Nylon 6
• Nylon 6/6
• Nylon 6/10
• Nylon 6/12
• Nylon 4/6
• Nylon 11
• Nylon 12
• Aromatic polyamide
• Polyamide-Polyimide
• Polyethylene and copolymers
• Polycarbonate
• Polybutylene Terephthalate
• Polycyclohexene dimethanol terephthalate
• PET: Polyethylene terephthalate
• PET/ PC blends
• Polyetherimide
• Polyethersulfone
• Polyimide
• Polymethylpentene
• Polyphenylene oxide
• Polyphenylene sulfide
• Polyphthalamide
• Polypropylene and copolymers
• Polystyrene and copolymers
• Polyurethanes
• Polyvinylidene chloride
• Silicones
• Polysulfones
• Polyethersulfones
• Polyureas
• PVC: Polyvinyl chloride
• Polyvinylchloride (chlorinated)
Types of Plastics Testing Lab
• Polyarylate plastic testing lab
• Polyurethane (PUR) plastic testing lab
• Acrylonitrile Ethylene Styrene (AES) plastic testing lab
• Polyaryletherketone (PAEK) plastic testing lab
• Polyethylene (PE) plastic testing lab
• Thermoplastic Elastomer (TPE) plastic testing lab
• Polyurethane Thermoset Elastomer (TSU) plastic testing lab
• Acrylonitrile Styrene (AS) plastic testing alab
• Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
• Polybutadiene Rubber (PBR) plastic testing lab
• SiliconeAlphamethylstyrene (AMS) plastic testing lab
• Polycaprolactone (PCL) plastic testing lab
• Styrene Acrylonitrile (SAN) plastic testing lab
• Biodegradable Polymers plastic testing lab
• Styrene Acrylonitrile Silicone (SAS) plastic testing lab
• Cellulose Acetate (CA) plastic testing lab
• PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
• Diallyl Phthalate (DAP) plastic testing lab
• Polyether Imide (PEI) plastic testing lab
• Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
• Dicyclopentadiene (DCPD) plastic testing lab
• Epoxy plastic testing and analysis lab
• Polyethylene Naphthalate (PEN) plastic testing lab
• Thermoplastic Polyurethane (TPU) plastic testing lab
• Fluoropolymer plastic testing lab
• Polyimide (PI) plastic testing lab
• FuranPolylactic Acid (PLA) plastic testing lab
• Thermoset (TS) plastic testing lab
• Ionomer plastic testing lab
• Polymethylpentene (PMP) plastic testing lab
• Thermoset Elastomer (TSE) plastic testing lab
• Polyphenylene Ether (PPE) plastic testing lab
• Vinyl Alcohol (VOH) plastic testing lab
• Methyl Cellulose (MC) plastic testing lab
• Polyphenylene Sulfide (PPS) plastic testing lab
• Methyl Methacrylate (MM) plastic testing lab
POLYMER PRODUCTS TESTING LAB
• Polyarylate polymer testing lab
• Polyurethane (PUR) polymer testing lab
• Acrylonitrile Ethylene Styrene (AES) polymer testing lab
• Polyaryletherketone (PAEK) polymer testing lab
• Polyethylene (PE) polymer testing lab
• Thermopolymer Elastomer (TPE) polymer testing lab
• Polyurethane Thermoset Elastomer (TSU) polymer testing lab
• Acrylonitrile Styrene (AS) polymer testing lab
• Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
• Polybutadiene Rubber (PBR) polymer testing lab
• SiliconeAlphamethylstyrene (AMS) polymer testing lab
• Polycaprolactone (PCL) polymer testing lab
• Styrene Acrylonitrile (SAN) polymer testing lab
• Biodegradable Polymers polymer testing lab
• Styrene Acrylonitrile Silicone (SAS) polymer testing lab
• Cellulose Acetate (CA) polymer testing lab
• PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
• Diallyl Phthalate (DAP) polymer testing lab
• Polyether Imide (PEI) polymer testing lab
• Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
• Dicyclopentadiene (DCPD) polymer testing lab
• Epoxy polymer testing lab
• Polyethylene Naphthalate (PEN) polymer testing lab
• Thermopolymer Polyurethane (TPU) polymer testing lab
• Fluoropolymer polymer testing lab
• Polyimide (PI) polymer testing lab
• FuranPolylactic Acid (PLA) polymer testing lab
• Thermoset (TS) polymer testing lab
• Ionomer polymer testing lab
• Polymethylpentene (PMP) polymer testing lab
• Thermoset Elastomer (TSE) polymer testing lab
• Polyphenylene Ether (PPE) polymer testing lab
• Vinyl Alcohol (VOH) polymer testing lab
• Methyl Cellulose (MC) polymer testing lab
• Polyphenylene Sulfide (PPS) polymer testing lab
• Methyl Methacrylate (MM) polymer testing lab
• Polymer product testing lab
• Polymer failure analysis lab
• Polymer reverse engineering lab
• Polymer analytical testing lab
• Mechanical testing of polymer lab
• polymers product testing lab
• Tensile testing of polymer lab
• Compression testing lab
• Bend testing O polymer lab
• Chemical analysis of polymer lab
• Physical testing of polymer lab
• FTIR analysis of polymer lab
• Polymer testing laboratory services
• Thermal analysis of polymer lab
• DSC Analysis of polymer lab
• Failure analysis of polymer lab
• Flexural testing lab
• Shear testing lab
• Intrinsic viscosity of polymers lab
• Inherent viscosity of polymers lab
• Relative viscosity of polymers lab
• Failure Analysis of lab
• Polymer testing lab
RUBBER PRODUCTS TESTING LAB
• Rubber gaskets testing lab
• Rubber pads testing lab
• Rubber O- Rings testing lab
• Rubber granules testing lab
• Rubber sponges testing lab
• Rubber corks testing lab
• Rubber tires testing lab
• Rubber seals testing lab
• Rubber mats testing lab
• Rubber automotive parts testing lab
• Rubber aerospace parts testing lab
• Other Rubber products testing lab
• Rubber shoes testing lab
• Rubber soles testing lab
• Rubber gloves testing lab
• Rubber bellows testing lab
• Allied rubber products testing lab
• Testing and analysis of crumb rubber
• Rubber degradation studies
• Rubber compound analysis
• Rubber product reverse engineering
• Rubber material identification
Types of Rubber Tested
• Natural rubber (NR)
• Synthetic Polyisporene (IR)
• Butyl rubber
• Chlorobutyl rubber (CR)
• Bromo butyl rubber
• Polybutadiene
• Styrene-butadiene rubber (SBR)
• Nitrile butadiene rubber (NBR)
• Hydrogenated nitrile-butadiene rubber
• Carboxylated nitrile butadiene rubber
• Chloroprene rubber
• Ethylene propylene rubber (EPM)
• Ethylene propylene diene rubber (EPDM)
• Epichlorohydrin rubber
• Polyacrylic rubber
• Silicone rubber
• Fluorosilicones
• Fluorphosphazene
• Fluorinated elastomer - Viton
• Fluorinated elastomer - Aflas
• Fluorinated elastomer - Kalrez
• Polysulfides
• Polyether block amides
• Chlorosulfonated polyethylene (Hypalon)
• Ethylene vinyl acetate (EVA)
Thermoplastic Elastomers Tested
• Polyolefin
• Copolyester-ether
• Polyester
• Styrene-Butadiene block copolymers
• Sytrene-Ethylene block copolymers
• Polyester polyurethane
• Polyether polyurethane
RUBBER, PLASTIC, Sponge , Vinyl FOAM , Flexible Material Testing
Hardness (Durometer) (ASTM D 2240)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Tear Resistance (ASTM D 624)
Compression Set Method B (ASTM D 395)
Compression Set at Low Temperature (ASTM D 1229)
Compression Deflection (ASTM D 575)
Accelerated ageing tests –Heat ageing (ASTM D 573)
Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
Adhesion to a Flexible Substrate (ASTM D 413)
Adhesion to a Rigid Substrate (ASTM D 429)
Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
Crack growth – De mattia (ASTM D813 - ASTM D430)
Rebound Resilience – Vertical ( ASTM D2632)
Ozone Cracking – Static (ASTM 1149)
Cracking Outdoors (ASTM d1171)
Cracking – Dynamic (ASTM D3395)
Low Temperature testing
Surface and volume Resistivity of insulating materials (ASTM D257)
Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
Identification by Infrared - Rubber (ASTM D 3677)
Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
Melting Point / Range of Rubber chemicals
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
Chemical Analysis of Rubber compound ( ASTM D297)
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Tg by DSC technique (ASTM D7426-08(2013)
Determination of IRHD of rubber (ASTM D3418-15)
UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
Tests on plastics materials and products
Hardness (Durometer) (ASTM D 2240)
Rockwell Hardness (ASTM D 785)
Tensile Properties (ASTM 638)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Izod Impact Strength (ASTM D256)
Charpy Impact Strength( ASTM D6110)
Density and Specific Gravity (ASTM D 792)
Melt Flow Rate or Melt Flow Index (ASTM D 1238)
Vicat Softening temperature of plastics (ASTM D1525)
Deflection Temperature of Plastic ( ASTM D0648)
Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
Resistance of Plastics to Chemical Reagents ( ASTM D0543)
Water Absorption of Plastics (ASTM D0570)
Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
Carbon Black content In Olefin Plastics (ASTM D1603)
Identification of Polymer by Infrared Spectrophotometry
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
UV weatherability test for Plastics
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Tests on Foam and Sponges
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Rubber and flexible Thermoplastic materials
Hardness (Durometer) (ASTM D 2240)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Tear Resistance (ASTM D 624)
Compression Set Method B (ASTM D 395)
Compression Set at Low Temperature (ASTM D 1229)
Compression Deflection (ASTM D 575)
Accelerated ageing tests –Heat ageing (ASTM D 573)
Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
Adhesion to a Flexible Substrate (ASTM D 413)
Adhesion to a Rigid Substrate (ASTM D 429)
Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
Crack growth – De mattia (ASTM D813 - ASTM D430)
Rebound Resilience – Vertical ( ASTM D2632)
Ozone Cracking – Static (ASTM1149)
Cracking Outdoors (ASTMd1171)
Cracking – Dynamic (ASTM D3395)
Low Temperature testing
Surface and volume Resistivity of insulating materials (ASTM D257)
Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
Identification by Infrared - Rubber (ASTM D 3677)
Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
Melting Point / Range of Rubber chemicals
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
Chemical Analysis of Rubber compound ( ASTM D297)
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Tg by DSC technique (ASTM D7426-08(2013)
Determination of IRHD of rubber (ASTM D3418-15)
UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
Tests on plastics materials and products
Hardness (Durometer) (ASTM D 2240)
Rockwell Hardness (ASTM D 785)
Tensile Properties (ASTM 638)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Charpy Impact Strength( ASTM D6110)
Density and Specific Gravity (ASTM D 792)
Melt Flow Rate or Melt Flow Index (ASTM D 1238)
Vicat Softening temperature of plastics (ASTM D1525)
Deflection Temperature of Plastic ( ASTM D0648)
Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
Resistance of Plastics to Chemical Reagents ( ASTM D0543)
Water Absorption of Plastics (ASTM D0570)
Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
Carbon Black content In Olefin Plastics (ASTM D1603)
Identification of Polymer by Infrared Spectrophotometry
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
UV weatherability test for Plastics
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Tests on Foam and Sponges
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Rubber and flexible Thermoplastic materials
Hardness (Durometer) (ASTM D 2240)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Tear Resistance (ASTM D 624)
Compression Set Method B (ASTM D 395)
Compression Set at Low Temperature (ASTM D 1229)
Compression Deflection (ASTM D 575)
Accelerated ageing tests –Heat ageing (ASTM D 573)
Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
Adhesion to a Flexible Substrate (ASTM D 413)
Adhesion to a Rigid Substrate (ASTM D 429)
Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
Crack growth – De mattia (ASTM D813 - ASTM D430)
Rebound Resilience – Vertical ( ASTM D2632)
Ozone Cracking – Static (ASTM1149)
Cracking Outdoors (ASTMd1171)
Cracking – Dynamic (ASTM D3395)
Low Temperature testing
Surface and volume Resistivity of insulating materials (ASTM D257)
Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
Identification by Infrared - Rubber (ASTM D 3677)
Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
Melting Point / Range of Rubber chemicals
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
Chemical Analysis of Rubber compound ( ASTM D297)
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Tg by DSC technique (ASTM D7426-08(2013)
Determination of IRHD of rubber (ASTM D3418-15)
UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
Tests on plastics materials and products
Hardness (Durometer) (ASTM D 2240)
Rockwell Hardness (ASTM D 785)
Tensile Properties (ASTM 638)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Charpy Impact Strength( ASTM D6110)
Density and Specific Gravity (ASTM D 792)
Melt Flow Rate or Melt Flow Index (ASTM D 1238)
Vicat Softening temperature of plastics (ASTM D1525)
Deflection Temperature of Plastic ( ASTM D0648)
Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
Resistance of Plastics to Chemical Reagents ( ASTM D0543)
Water Absorption of Plastics (ASTM D0570)
Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
Carbon Black content In Olefin Plastics (ASTM D1603)
Identification of Polymer by Infrared Spectrophotometry
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
UV weatherability test for Plastics
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Tests on Foam and Sponges
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Rubber and flexible Thermoplastic materials
Hardness (Durometer) (ASTM D 2240)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Tear Resistance (ASTM D 624)
Compression Set Method B (ASTM D 395)
Compression Set at Low Temperature (ASTM D 1229)
Compression Deflection (ASTM D 575)
Accelerated ageing tests –Heat ageing (ASTM D 573)
Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
Adhesion to a Flexible Substrate (ASTM D 413)
Adhesion to a Rigid Substrate (ASTM D 429)
Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
Crack growth – De mattia (ASTM D813 - ASTM D430)
Rebound Resilience – Vertical ( ASTM D2632)
Ozone Cracking – Static (ASTM1149)
Cracking Outdoors (ASTMd1171)
Cracking – Dynamic (ASTM D3395)
Low Temperature testing
Surface and volume Resistivity of insulating materials (ASTM D257)
Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
Identification by Infrared - Rubber (ASTM D 3677)
Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
Melting Point / Range of Rubber chemicals
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
Chemical Analysis of Rubber compound ( ASTM D297)
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Tg by DSC technique (ASTM D7426-08(2013)
Determination of IRHD of rubber (ASTM D3418-15)
UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
Tests on plastics materials and products
Hardness (Durometer) (ASTM D 2240)
Rockwell Hardness (ASTM D 785)
Tensile Properties (ASTM 638)
Tensile, Elongation and Modulus Properties (ASTM D 412)
Charpy Impact Strength( ASTM D6110)
Density and Specific Gravity (ASTM D 792)
Melt Flow Rate or Melt Flow Index (ASTM D 1238)
Vicat Softening temperature of plastics (ASTM D1525)
Deflection Temperature of Plastic ( ASTM D0648)
Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
Resistance of Plastics to Chemical Reagents ( ASTM D0543)
Water Absorption of Plastics (ASTM D0570)
Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
Carbon Black content In Olefin Plastics (ASTM D1603)
Identification of Polymer by Infrared Spectrophotometry
Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
UV weatherability test for Plastics
Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
Tests on Foam and Sponges
Testing of Flexible Cellular Materials - Latex Foam D1055-04
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
Types of Material Testing Laboratory
pvc material testing Laboratory in belize ,
pvc pipe testing Laboratory in belize ,
rubber testing Laboratory in belize ,
polymer testing Laboratory in belize ,
latex testing Laboratory in belize ,
plastic testing Laboratory in belize ,
abs plastic testing Laboratory in belize ,
packaging material testing Laboratory in belize ,
food packaging material testing Laboratory in belize ,
civil material testing Laboratory in belize ,
construction material testing Laboratory in belize ,
spring testing Laboratory in belize ,
wood testing Laboratory in belize ,
paint testing Laboratory in belize ,
bricks testing Laboratory in belize ,
resin testing Laboratory in belize ,
thermoplastic testing Laboratory in belize ,
foam testing Laboratory in belize ,
sponge testing Laboratory in belize ,
heavy metal testing in belize ,
coal testing Laboratory in belize ,
coal coke testing in belize ,
thermal coal testing in belize ,
metallurgical coke testing in belize ,
petrolium coke testing in belize ,
fertilizer testing in belize ,
cement testing Laboratory in belize ,
fly ash testing in belize ,
aggregates testing Laboratory in belize ,
rock testing Laboratory in belize ,
textile testing Laboratory in belize ,
fabric and garment testing Laboratory in belize ,
fabric testing Laboratory in belize ,
asphalt testing Laboratory in belize ,
uts utm testing in belize ,
triaxial rock testing in belize ...
Types of Plastics Testing Laboratory
Polyarylate plastic testing Laboratory in belize ,
Polyurethane (PUR) plastic testing Laboratory in belize ,
Acrylonitrile Ethylene Styrene (AES) plastic testing Laboratory in belize ,
Polyaryletherketone (PAEK) plastic testing Laboratory in belize ,
Polyethylene (PE) plastic testing Laboratory in belize ,
Thermoplastic Elastomer (TPE) plastic testing Laboratory in belize ,
Polyurethane Thermoset Elastomer (TSU) plastic testing Laboratory in belize ,
Acrylonitrile Styrene (AS) plastic testing aLaboratory in belize ,
Acrylonitrile Styrene Acrylate (ASA) plastic testing Laboratory in belize ,
Polybutadiene Rubber (PBR) plastic testing Laboratory in belize ,
SiliconeAlphamethylstyrene (AMS) plastic testing Laboratory in belize ,
Polycaprolactone (PCL) plastic testing Laboratory in belize ,
Styrene Acrylonitrile (SAN) plastic testing Laboratory in belize ,
Biodegradable Polymers plastic testing Laboratory in belize ,
Styrene Acrylonitrile Silicone (SAS) plastic testing Laboratory in belize ,
Cellulose Acetate (CA) plastic testing Laboratory in belize ,
PolyesterStyrene Maleic Anhydride (SMA) plastic testing Laboratory in belize ,
Diallyl Phthalate (DAP) plastic testing Laboratory in belize ,
Polyether Imide (PEI) plastic testing Laboratory in belize ,
Styrenic Vinyl Acrylonitrile (SVA) plastic testing Laboratory in belize ,
Dicyclopentadiene (DCPD) plastic testing Laboratory in belize ,
Epoxy plastic testing and analysis Laboratory in belize ,
Polyethylene Naphthalate (PEN) plastic testing Laboratory in belize ,
Thermoplastic Polyurethane (TPU) plastic testing Laboratory in belize ,
Fluoropolymer plastic testing Laboratory in belize ,
Polyimide (PI) plastic testing Laboratory in belize ,
FuranPolylactic Acid (PLA) plastic testing Laboratory in belize ,
Thermoset (TS) plastic testing Laboratory in belize ,
Ionomer plastic testing Laboratory in belize ,
Polymethylpentene (PMP) plastic testing Laboratory in belize ,
Thermoset Elastomer (TSE) plastic testing Laboratory in belize ,
Polyphenylene Ether (PPE) plastic testing Laboratory in belize ,
Vinyl Alcohol (VOH) plastic testing Laboratory in belize ,
Methyl Cellulose (MC) plastic testing Laboratory in belize ,
Polyphenylene Sulfide (PPS) plastic testing Laboratory in belize ,
Methyl Methacrylate (MM) plastic testing Laboratory in belize ...
POLYMER PRODUCTS TESTING LABORATORY
Polyarylate polymer testing Laboratory in belize ,
Polyurethane (PUR) polymer testing Laboratory in belize ,
Acrylonitrile Ethylene Styrene (AES) polymer testing Laboratory in belize ,
Polyaryletherketone (PAEK) polymer testing Laboratory in belize ,
Polyethylene (PE) polymer testing Laboratory in belize ,
Thermopolymer Elastomer (TPE) polymer testing Laboratory in belize ,
Polyurethane Thermoset Elastomer (TSU) polymer testing Laboratory in belize ,
Acrylonitrile Styrene (AS) polymer testing Laboratory in belize ,
Acrylonitrile Styrene Acrylate (ASA) polymer testing Laboratory in belize ,
Polybutadiene Rubber (PBR) polymer testing Laboratory in belize ,
SiliconeAlphamethylstyrene (AMS) polymer testing Laboratory in belize ,
Polycaprolactone (PCL) polymer testing Laboratory in belize ,
Styrene Acrylonitrile (SAN) polymer testing Laboratory in belize ,
Biodegradable Polymers polymer testing Laboratory in belize ,
Styrene Acrylonitrile Silicone (SAS) polymer testing Laboratory in belize ,
Cellulose Acetate (CA) polymer testing Laboratory in belize ,
PolyesterStyrene Maleic Anhydride (SMA) polymer testing Laboratory in belize ,
Diallyl Phthalate (DAP) polymer testing Laboratory in belize ,
Polyether Imide (PEI) polymer testing Laboratory in belize ,
Styrenic Vinyl Acrylonitrile (SVA) polymer testing Laboratory in belize ,
Dicyclopentadiene (DCPD) polymer testing Laboratory in belize ,
Epoxy polymer testing Laboratory in belize ,
Polyethylene Naphthalate (PEN) polymer testing Laboratory in belize ,
Thermopolymer Polyurethane (TPU) polymer testing Laboratory in belize ,
Fluoropolymer polymer testing Laboratory in belize ,
Polyimide (PI) polymer testing Laboratory in belize ,
FuranPolylactic Acid (PLA) polymer testing Laboratory in belize ,
Thermoset (TS) polymer testing Laboratory in belize ,
Ionomer polymer testing Laboratory in belize ,
Polymethylpentene (PMP) polymer testing Laboratory in belize ,
Thermoset Elastomer (TSE) polymer testing Laboratory in belize ,
Polyphenylene Ether (PPE) polymer testing Laboratory in belize ,
Vinyl Alcohol (VOH) polymer testing Laboratory in belize ,
Methyl Cellulose (MC) polymer testing Laboratory in belize ,
Polyphenylene Sulfide (PPS) polymer testing Laboratory in belize ,
Methyl Methacrylate (MM) polymer testing Laboratory in belize ,
Polymer product testing Laboratory in belize ,
Polymer failure analysis Laboratory in belize ,
Polymer reverse engineering Laboratory in belize ,
Polymer analytical testing Laboratory in belize ,
Mechanical testing of polymer Laboratory in belize ,
polymers product testing Laboratory in belize ,
Tensile testing of polymer Laboratory in belize ,
Compression testing Laboratory in belize ,
Bend testing O polymer Laboratory in belize ,
Chemical analysis of polymer Laboratory in belize ,
Physical testing of polymer Laboratory in belize ,
FTIR analysis of polymer Laboratory in belize ,
Polymer testing Laboratoryoratory services
Thermal analysis of polymer Laboratory in belize ,
DSC Analysis of polymer Laboratory in belize ,
Failure analysis of polymer Laboratory in belize ,
Flexural testing Laboratory in belize ,
Shear testing Laboratory in belize ,
Intrinsic viscosity of polymers Laboratory in belize ,
Inherent viscosity of polymers Laboratory in belize ,
Relative viscosity of polymers Laboratory in belize ,
Failure Analysis of Laboratory in belize ,
Polymer testing Laboratory in belize ...
RUBBER PRODUCTS TESTING LABORATORY
Rubber gaskets testing Laboratory in belize ,
Rubber pads testing Laboratory in belize ,
Rubber O- Rings testing Laboratory in belize ,
Rubber granules testing Laboratory in belize ,
Rubber sponges testing Laboratory in belize ,
Rubber corks testing Laboratory in belize ,
Rubber tires testing Laboratory in belize ,
Rubber seals testing Laboratory in belize ,
Rubber mats testing Laboratory in belize ,
Rubber automotive parts testing Laboratory in belize ,
Rubber aerospace parts testing Laboratory in belize ,
Other Rubber products testing Laboratory in belize ,
Rubber shoes testing Laboratory in belize ,
Rubber soles testing Laboratory in belize ,
Rubber gloves testing Laboratory in belize ,
Rubber bellows testing Laboratory in belize ,
Allied rubber products testing Laboratory in belize ,
Testing and analysis of crumb rubber in belize ,
Rubber degradation studies in belize ,
Rubber compound analysis in belize ,
Rubber product reverse engineering in belize ,
Rubber material identification in belize ...
Types of Rubber Testing Laboratory
Natural rubber (NR) in belize ,
Synthetic Polyisporene (IR) in belize ,
Butyl rubber in belize ,
Chlorobutyl rubber (CR) in belize ,
Bromo butyl rubber in belize ,
Polybutadiene in belize ,
Styrene-butadiene rubber (SBR) in belize ,
Nitrile butadiene rubber (NBR) in belize ,
Hydrogenated nitrile-butadiene rubber in belize ,
Carboxylated nitrile butadiene rubber in belize ,
Chloroprene rubber in belize ,
Ethylene propylene rubber (EPM) in belize ,
Ethylene propylene diene rubber (EPDM) in belize ,
Epichlorohydrin rubber in belize ,
Polyacrylic rubber in belize ,
Silicone rubber in belize ,
Fluorosilicones in belize ,
Fluorphosphazene in belize ,
Fluorinated elastomer - Viton in belize ,
Fluorinated elastomer - Aflas in belize ,
Fluorinated elastomer - Kalrez in belize ,
Polysulfides in belize ,
Polyether block amides in belize ,
Chlorosulfonated polyethylene (Hypalon)
Ethylene vinyl acetate (EVA) in belize ...
list of our services following cities
belize city |
san ignacio |
orange walk |
belmopan |
dangriga |
corozal |
san pedro |
benque viejo el carmen |
punta gorda |
placencia |
shipyard |
valley of peace |
belize city |
orange walk |
belmopan |
san ignacio |
san pedro |
dangriga |
corozal |
ladyville |
punta gorda |
trial farm |
bullet tree falls |
santa familia |
consejo |
maya beach |
camelote |
benque viejo el carmen |
san estevan |
san pablo |
guinea grass |
blue creek village |
salt creek |
nago bank |
more force |
white hill |
isabella |
flowers bank |
hattieville |
lime walk |
sand hill |
egypt |
bermudian landing |
scotland |
corozalito |
maskall |
biscayne |
butcher burns |
bakers |
cedar bank |
davis bank |
santana |
bomba |
burrell boom |
lucky strike |
little bermudian landing |
washing tree |
ferguson bank |
grace bank |
watters bank |
rockstone pond |
caye corker |
may pen |
rockville |
gales point |
bocotora |
tropical park |
cowhead creek |
joe wagner boom |
freetown sibun |
chicago |
gracy rock bank |
bob eiley |
santiago jalacte |
rancho |
bacalar chico |
san antonio |
estrella |
pueblo nuevo |
chunch |
carolina |
benque viejo |
campa pita |
shipstern |
yo chen |
cowpen |
cocos |
cristo rey |
remate |
chan chen |
tacistal |
san francisco |
puebla nueva |
santa rita |
san pedro |
rancho corozal |
villa alfonso |
aventura |
chunox |
san joaquin |
patchchacan |
concepcion |
libertad |
chacan chac mol |
calcutta |
shipstern landing |
hill bank |
louisville |
san andres |
sarteneja |
laguna |
san fernando ....