AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

THERMOPLASTIC TESTING
 
 
 
 
Thermoplastic Materials
 
  • • ABS Thermoplastic Testing lab
  • • Acrylic Thermoplastic Polymer Testing lab
  • • Polybenzimidazole Thermoplastic Polymer Testing lab
  • • Polyethylene Thermoplastic Polymers Testing lab
  • • Homopolymer Thermoplastic Testing lab
  • • Copolymer Thermoplastic Testing lab
  • • Polyester Thermoplastic Testing lab
  • • Polyurethane Thermoplastic Polymer Testing lab
  • • Styrene Acrylonitrile Polymer Testing lab
  •  
    Thermoplastic Physical property testing
     
  • Physical property tests measure the molecular structure of the material which can often effect the physical properties. The most important properties for measurement include:
  •  
    • Specific Gravity (ASTM D792):
     
  • The ratio of the density of a liquid or solid mass to the density of water at a specific temperature.
  •  
    • Hardness (ASTM D2240):
     
  • The resistance of a plastic material to indentation. It is measured on a durometer machine which led to the industry to call hardness “duro.” Normal specification is plus or minus 3 and three scales are used: Shore A for flexible, Shore C for semi rigid and Shore D for rigid. Usually a delayed reading of 10 or 15 seconds is used.
  •  
    • Tensile Strength (ASTM D638):
     
  • The maximum nominal stress sustained by a test specimen being pulled from both ends, at a specific temperature and a specific rate of stretching. Specification is a minimum amount in Pascals, (10-6 N/mm2).
  •  
    • Elongation (ASTM D638):
     
  • The amount of increased length of a material until breakage. Specification is a minimum percentage.
  •  
    • Flexural properties (three point bending method) (UNE-EN ISO 178):
     
  • The three point bending flexural test provides values for the modulus of elasticity in bending, flexural stress, flexural strain and the flexural stress-strain response of the material. The main advantage of a three point flexural test is the ease of the specimen preparation and testing.
  •  
    • Impact Energy-Charpy ( UNE-EN ISO 179):
     
  • The Charpy impact test, also known as the Charpy V-notch test, is a standardized high strain-rate test which determines the amount of energy absorbed by a material during fracture. This absorbed energy is a measure of a given material’s notch toughness and acts as a tool to study temperature-dependent ductile-brittle transition.
  •  
    RESIN TESTING
    Chemical and Physical Analysis of Resin Testing Lab
     
    Chemical Analysis of Resin
     
  • • Ion exchange capacities by ASTM and other methods
  • • Carbonate/bicarbonate content (including organically-bound and ionic C-14)
  • • Ionic composition
  • • Resin flow testing facilities (kinetics and operating capacity under once-through and recirculation modes for engineering scale-up projections)
  • • Natural and process-induced fouling
  •  
    Physical Analysis of Resin
     
  • • Slurriability and separability of mixed bed resins
  • • Wet particle size analysis
  • • Crush strength (friability – Chatillon) and attrition
  • • Thermal and oxidation resistance
  • • Attrition
  • • Specialized sampling and analysis capabilities for radioactive process resins and waste resins
  • • Quality assurance and quality control testing of new resins
  •  
    PLASTIC TESTING
     
    Types of Plastics Testing Offered:
     
  • • ABS Plastic Testing Lab
  • • Polypropylene Testing
  • • Polyethylene Testing
  • • PVC Testing lab
  • • Nylon 6-6 Testing lab
  • • PTFE Testing Services
  • • PET Testing Services
  • • ABS/PC alloys Plastic Testing Lab
  • • Acetal Plastic Testing Lab
  • • Acrylic Testing Lab
  • • Acrylic-styrene copolymer
  • • Acrylonitrile
  • • Cellulose Acetate
  • • Cellulose Acetate Butanal
  • • Cellulose Acetate Propionate
  • • Chlorinated polyethylene
  • • Epoxy resins
  • • Ethylene vinyl alcohol
  • • Fluoroplastic – PTFE
  • • Fluoroplastic – FEP
  • • Fluoroplastic – PVDF
  • • Ionomer
  • • Polyacrylether ketone
  • • Polyetheether ketone
  • • Liquid Crystal Polymer
  • • Melamine formaldehyde
  • • Phenolics
  • • Nylon 6
  • • Nylon 6/6
  • • Nylon 6/10
  • • Nylon 6/12
  • • Nylon 4/6
  • • Nylon 11
  • • Nylon 12
  • • Aromatic polyamide
  • • Polyamide-Polyimide
  • • Polyethylene and copolymers
  • • Polycarbonate
  • • Polybutylene Terephthalate
  • • Polycyclohexene dimethanol terephthalate
  • • PET: Polyethylene terephthalate
  • • PET/ PC blends
  • • Polyetherimide
  • • Polyethersulfone
  • • Polyimide
  • • Polymethylpentene
  • • Polyphenylene oxide
  • • Polyphenylene sulfide
  • • Polyphthalamide
  • • Polypropylene and copolymers
  • • Polystyrene and copolymers
  • • Polyurethanes
  • • Polyvinylidene chloride
  • • Silicones
  • • Polysulfones
  • • Polyethersulfones
  • • Polyureas
  • • PVC: Polyvinyl chloride
  • • Polyvinylchloride (chlorinated)
  •  
    Types of Plastics Testing Lab
     
  • • Polyarylate plastic testing lab
  • • Polyurethane (PUR) plastic testing lab
  • • Acrylonitrile Ethylene Styrene (AES) plastic testing lab
  • • Polyaryletherketone (PAEK) plastic testing lab
  • • Polyethylene (PE) plastic testing lab
  • • Thermoplastic Elastomer (TPE) plastic testing lab
  • • Polyurethane Thermoset Elastomer (TSU) plastic testing lab
  • • Acrylonitrile Styrene (AS) plastic testing alab
  • • Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
  • • Polybutadiene Rubber (PBR) plastic testing lab
  • • SiliconeAlphamethylstyrene (AMS) plastic testing lab
  • • Polycaprolactone (PCL) plastic testing lab
  • • Styrene Acrylonitrile (SAN) plastic testing lab
  • • Biodegradable Polymers plastic testing lab
  • • Styrene Acrylonitrile Silicone (SAS) plastic testing lab
  • • Cellulose Acetate (CA) plastic testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
  • • Diallyl Phthalate (DAP) plastic testing lab
  • • Polyether Imide (PEI) plastic testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
  • • Dicyclopentadiene (DCPD) plastic testing lab
  • • Epoxy plastic testing and analysis lab
  • • Polyethylene Naphthalate (PEN) plastic testing lab
  • • Thermoplastic Polyurethane (TPU) plastic testing lab
  • • Fluoropolymer plastic testing lab
  • • Polyimide (PI) plastic testing lab
  • • FuranPolylactic Acid (PLA) plastic testing lab
  • • Thermoset (TS) plastic testing lab
  • • Ionomer plastic testing lab
  • • Polymethylpentene (PMP) plastic testing lab
  • • Thermoset Elastomer (TSE) plastic testing lab
  • • Polyphenylene Ether (PPE) plastic testing lab
  • • Vinyl Alcohol (VOH) plastic testing lab
  • • Methyl Cellulose (MC) plastic testing lab
  • • Polyphenylene Sulfide (PPS) plastic testing lab
  • • Methyl Methacrylate (MM) plastic testing lab
  •  
    POLYMER PRODUCTS TESTING LAB
     
  • • Polyarylate polymer testing lab
  • • Polyurethane (PUR) polymer testing lab
  • • Acrylonitrile Ethylene Styrene (AES) polymer testing lab
  • • Polyaryletherketone (PAEK) polymer testing lab
  • • Polyethylene (PE) polymer testing lab
  • • Thermopolymer Elastomer (TPE) polymer testing lab
  • • Polyurethane Thermoset Elastomer (TSU) polymer testing lab
  • • Acrylonitrile Styrene (AS) polymer testing lab
  • • Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
  • • Polybutadiene Rubber (PBR) polymer testing lab
  • • SiliconeAlphamethylstyrene (AMS) polymer testing lab
  • • Polycaprolactone (PCL) polymer testing lab
  • • Styrene Acrylonitrile (SAN) polymer testing lab
  • • Biodegradable Polymers polymer testing lab
  • • Styrene Acrylonitrile Silicone (SAS) polymer testing lab
  • • Cellulose Acetate (CA) polymer testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
  • • Diallyl Phthalate (DAP) polymer testing lab
  • • Polyether Imide (PEI) polymer testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
  • • Dicyclopentadiene (DCPD) polymer testing lab
  • • Epoxy polymer testing lab
  • • Polyethylene Naphthalate (PEN) polymer testing lab
  • • Thermopolymer Polyurethane (TPU) polymer testing lab
  • • Fluoropolymer polymer testing lab
  • • Polyimide (PI) polymer testing lab
  • • FuranPolylactic Acid (PLA) polymer testing lab
  • • Thermoset (TS) polymer testing lab
  • • Ionomer polymer testing lab
  • • Polymethylpentene (PMP) polymer testing lab
  • • Thermoset Elastomer (TSE) polymer testing lab
  • • Polyphenylene Ether (PPE) polymer testing lab
  • • Vinyl Alcohol (VOH) polymer testing lab
  • • Methyl Cellulose (MC) polymer testing lab
  • • Polyphenylene Sulfide (PPS) polymer testing lab
  • • Methyl Methacrylate (MM) polymer testing lab
  • • Polymer product testing lab
  • • Polymer failure analysis lab
  • • Polymer reverse engineering lab
  • • Polymer analytical testing lab
  • • Mechanical testing of polymer lab
  • • polymers product testing lab
  • • Tensile testing of polymer lab
  • • Compression testing lab
  • • Bend testing O polymer lab
  • • Chemical analysis of polymer lab
  • • Physical testing of polymer lab
  • • FTIR analysis of polymer lab
  • • Polymer testing laboratory services
  • • Thermal analysis of polymer lab
  • • DSC Analysis of polymer lab
  • • Failure analysis of polymer lab
  • • Flexural testing lab
  • • Shear testing lab
  • • Intrinsic viscosity of polymers lab
  • • Inherent viscosity of polymers lab
  • • Relative viscosity of polymers lab
  • • Failure Analysis of lab
  • • Polymer testing lab
  •  
    RUBBER PRODUCTS TESTING LAB
     
  • • Rubber gaskets testing lab
  • • Rubber pads testing lab
  • • Rubber O- Rings testing lab
  • • Rubber granules testing lab
  • • Rubber sponges testing lab
  • • Rubber corks testing lab
  • • Rubber tires testing lab
  • • Rubber seals testing lab
  • • Rubber mats testing lab
  • • Rubber automotive parts testing lab
  • • Rubber aerospace parts testing lab
  • • Other Rubber products testing lab
  • • Rubber shoes testing lab
  • • Rubber soles testing lab
  • • Rubber gloves testing lab
  • • Rubber bellows testing lab
  • • Allied rubber products testing lab
  • • Testing and analysis of crumb rubber
  • • Rubber degradation studies
  • • Rubber compound analysis
  • • Rubber product reverse engineering
  • • Rubber material identification
  •  
    Types of Rubber Tested
     
  • • Natural rubber (NR)
  • • Synthetic Polyisporene (IR)
  • • Butyl rubber
  • • Chlorobutyl rubber (CR)
  • • Bromo butyl rubber
  • • Polybutadiene
  • • Styrene-butadiene rubber (SBR)
  • • Nitrile butadiene rubber (NBR)
  • • Hydrogenated nitrile-butadiene rubber
  • • Carboxylated nitrile butadiene rubber
  • • Chloroprene rubber
  • • Ethylene propylene rubber (EPM)
  • • Ethylene propylene diene rubber (EPDM)
  • • Epichlorohydrin rubber
  • • Polyacrylic rubber
  • • Silicone rubber
  • • Fluorosilicones
  • • Fluorphosphazene
  • • Fluorinated elastomer - Viton
  • • Fluorinated elastomer - Aflas
  • • Fluorinated elastomer - Kalrez
  • • Polysulfides
  • • Polyether block amides
  • • Chlorosulfonated polyethylene (Hypalon)
  • • Ethylene vinyl acetate (EVA)
  •  
    Thermoplastic Elastomers Tested
     
  • • Polyolefin
  • • Copolyester-ether
  • • Polyester
  • • Styrene-Butadiene block copolymers
  • • Sytrene-Ethylene block copolymers
  • • Polyester polyurethane
  • • Polyether polyurethane
  •  
    Types of Material Testing Laboratory
     
    pvc material testing Laboratory in armenia , pvc pipe testing Laboratory in armenia , rubber testing Laboratory in armenia , polymer testing Laboratory in armenia , latex testing Laboratory in armenia , plastic testing Laboratory in armenia , abs plastic testing Laboratory in armenia , packaging material testing Laboratory in armenia , food packaging material testing Laboratory in armenia , civil material testing Laboratory in armenia , construction material testing Laboratory in armenia , spring testing Laboratory in armenia , wood testing Laboratory in armenia , paint testing Laboratory in armenia , bricks testing Laboratory in armenia , resin testing Laboratory in armenia , thermoplastic testing Laboratory in armenia , foam testing Laboratory in armenia , sponge testing Laboratory in armenia , heavy metal testing in armenia , coal testing Laboratory in armenia , coal coke testing in armenia , thermal coal testing in armenia , metallurgical coke testing in armenia , petrolium coke testing in armenia , fertilizer testing in armenia , cement testing Laboratory in armenia , fly ash testing in armenia , aggregates testing Laboratory in armenia , rock testing Laboratory in armenia , textile testing Laboratory in armenia , fabric and garment testing Laboratory in armenia , fabric testing Laboratory in armenia , asphalt testing Laboratory in armenia , uts utm testing in armenia , triaxial rock testing in armenia ...
     
    Types of Plastics Testing Laboratory
     
    Polyarylate plastic testing Laboratory in armenia , Polyurethane (PUR) plastic testing Laboratory in armenia , Acrylonitrile Ethylene Styrene (AES) plastic testing Laboratory in armenia , Polyaryletherketone (PAEK) plastic testing Laboratory in armenia , Polyethylene (PE) plastic testing Laboratory in armenia , Thermoplastic Elastomer (TPE) plastic testing Laboratory in armenia , Polyurethane Thermoset Elastomer (TSU) plastic testing Laboratory in armenia , Acrylonitrile Styrene (AS) plastic testing aLaboratory in armenia , Acrylonitrile Styrene Acrylate (ASA) plastic testing Laboratory in armenia , Polybutadiene Rubber (PBR) plastic testing Laboratory in armenia , SiliconeAlphamethylstyrene (AMS) plastic testing Laboratory in armenia , Polycaprolactone (PCL) plastic testing Laboratory in armenia , Styrene Acrylonitrile (SAN) plastic testing Laboratory in armenia , Biodegradable Polymers plastic testing Laboratory in armenia , Styrene Acrylonitrile Silicone (SAS) plastic testing Laboratory in armenia , Cellulose Acetate (CA) plastic testing Laboratory in armenia , PolyesterStyrene Maleic Anhydride (SMA) plastic testing Laboratory in armenia , Diallyl Phthalate (DAP) plastic testing Laboratory in armenia , Polyether Imide (PEI) plastic testing Laboratory in armenia , Styrenic Vinyl Acrylonitrile (SVA) plastic testing Laboratory in armenia , Dicyclopentadiene (DCPD) plastic testing Laboratory in armenia , Epoxy plastic testing and analysis Laboratory in armenia , Polyethylene Naphthalate (PEN) plastic testing Laboratory in armenia , Thermoplastic Polyurethane (TPU) plastic testing Laboratory in armenia , Fluoropolymer plastic testing Laboratory in armenia , Polyimide (PI) plastic testing Laboratory in armenia , FuranPolylactic Acid (PLA) plastic testing Laboratory in armenia , Thermoset (TS) plastic testing Laboratory in armenia , Ionomer plastic testing Laboratory in armenia , Polymethylpentene (PMP) plastic testing Laboratory in armenia , Thermoset Elastomer (TSE) plastic testing Laboratory in armenia , Polyphenylene Ether (PPE) plastic testing Laboratory in armenia , Vinyl Alcohol (VOH) plastic testing Laboratory in armenia , Methyl Cellulose (MC) plastic testing Laboratory in armenia , Polyphenylene Sulfide (PPS) plastic testing Laboratory in armenia , Methyl Methacrylate (MM) plastic testing Laboratory in armenia ...
     
    POLYMER PRODUCTS TESTING LABORATORY
     
    Polyarylate polymer testing Laboratory in armenia , Polyurethane (PUR) polymer testing Laboratory in armenia , Acrylonitrile Ethylene Styrene (AES) polymer testing Laboratory in armenia , Polyaryletherketone (PAEK) polymer testing Laboratory in armenia , Polyethylene (PE) polymer testing Laboratory in armenia , Thermopolymer Elastomer (TPE) polymer testing Laboratory in armenia , Polyurethane Thermoset Elastomer (TSU) polymer testing Laboratory in armenia , Acrylonitrile Styrene (AS) polymer testing Laboratory in armenia , Acrylonitrile Styrene Acrylate (ASA) polymer testing Laboratory in armenia , Polybutadiene Rubber (PBR) polymer testing Laboratory in armenia , SiliconeAlphamethylstyrene (AMS) polymer testing Laboratory in armenia , Polycaprolactone (PCL) polymer testing Laboratory in armenia , Styrene Acrylonitrile (SAN) polymer testing Laboratory in armenia , Biodegradable Polymers polymer testing Laboratory in armenia , Styrene Acrylonitrile Silicone (SAS) polymer testing Laboratory in armenia , Cellulose Acetate (CA) polymer testing Laboratory in armenia , PolyesterStyrene Maleic Anhydride (SMA) polymer testing Laboratory in armenia , Diallyl Phthalate (DAP) polymer testing Laboratory in armenia , Polyether Imide (PEI) polymer testing Laboratory in armenia , Styrenic Vinyl Acrylonitrile (SVA) polymer testing Laboratory in armenia , Dicyclopentadiene (DCPD) polymer testing Laboratory in armenia , Epoxy polymer testing Laboratory in armenia , Polyethylene Naphthalate (PEN) polymer testing Laboratory in armenia , Thermopolymer Polyurethane (TPU) polymer testing Laboratory in armenia , Fluoropolymer polymer testing Laboratory in armenia , Polyimide (PI) polymer testing Laboratory in armenia , FuranPolylactic Acid (PLA) polymer testing Laboratory in armenia , Thermoset (TS) polymer testing Laboratory in armenia , Ionomer polymer testing Laboratory in armenia , Polymethylpentene (PMP) polymer testing Laboratory in armenia , Thermoset Elastomer (TSE) polymer testing Laboratory in armenia , Polyphenylene Ether (PPE) polymer testing Laboratory in armenia , Vinyl Alcohol (VOH) polymer testing Laboratory in armenia , Methyl Cellulose (MC) polymer testing Laboratory in armenia , Polyphenylene Sulfide (PPS) polymer testing Laboratory in armenia , Methyl Methacrylate (MM) polymer testing Laboratory in armenia , Polymer product testing Laboratory in armenia , Polymer failure analysis Laboratory in armenia , Polymer reverse engineering Laboratory in armenia , Polymer analytical testing Laboratory in armenia , Mechanical testing of polymer Laboratory in armenia , polymers product testing Laboratory in armenia , Tensile testing of polymer Laboratory in armenia , Compression testing Laboratory in armenia , Bend testing O polymer Laboratory in armenia , Chemical analysis of polymer Laboratory in armenia , Physical testing of polymer Laboratory in armenia , FTIR analysis of polymer Laboratory in armenia , Polymer testing Laboratoryoratory services Thermal analysis of polymer Laboratory in armenia , DSC Analysis of polymer Laboratory in armenia , Failure analysis of polymer Laboratory in armenia , Flexural testing Laboratory in armenia , Shear testing Laboratory in armenia , Intrinsic viscosity of polymers Laboratory in armenia , Inherent viscosity of polymers Laboratory in armenia , Relative viscosity of polymers Laboratory in armenia , Failure Analysis of Laboratory in armenia , Polymer testing Laboratory in armenia ...
     
    RUBBER PRODUCTS TESTING LABORATORY
     
    Rubber gaskets testing Laboratory in armenia , Rubber pads testing Laboratory in armenia , Rubber O- Rings testing Laboratory in armenia , Rubber granules testing Laboratory in armenia , Rubber sponges testing Laboratory in armenia , Rubber corks testing Laboratory in armenia , Rubber tires testing Laboratory in armenia , Rubber seals testing Laboratory in armenia , Rubber mats testing Laboratory in armenia , Rubber automotive parts testing Laboratory in armenia , Rubber aerospace parts testing Laboratory in armenia , Other Rubber products testing Laboratory in armenia , Rubber shoes testing Laboratory in armenia , Rubber soles testing Laboratory in armenia , Rubber gloves testing Laboratory in armenia , Rubber bellows testing Laboratory in armenia , Allied rubber products testing Laboratory in armenia , Testing and analysis of crumb rubber in armenia , Rubber degradation studies in armenia , Rubber compound analysis in armenia , Rubber product reverse engineering in armenia , Rubber material identification in armenia ...
     
    Types of Rubber Testing Laboratory
     
    Natural rubber (NR) in armenia , Synthetic Polyisporene (IR) in armenia , Butyl rubber in armenia , Chlorobutyl rubber (CR) in armenia , Bromo butyl rubber in armenia , Polybutadiene in armenia , Styrene-butadiene rubber (SBR) in armenia , Nitrile butadiene rubber (NBR) in armenia , Hydrogenated nitrile-butadiene rubber in armenia , Carboxylated nitrile butadiene rubber in armenia , Chloroprene rubber in armenia , Ethylene propylene rubber (EPM) in armenia , Ethylene propylene diene rubber (EPDM) in armenia , Epichlorohydrin rubber in armenia , Polyacrylic rubber in armenia , Silicone rubber in armenia , Fluorosilicones in armenia , Fluorphosphazene in armenia , Fluorinated elastomer - Viton in armenia , Fluorinated elastomer - Aflas in armenia , Fluorinated elastomer - Kalrez in armenia , Polysulfides in armenia , Polyether block amides in armenia , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in armenia ...
     
    list of our services following cities
     
    yerevan | gyumri | vanadzor | vagharshapat | abovyan | kapan | hrazdan | armavir | artashat | ijevan | gavar | goris | charentsavan | ararat | masis | artik | sevan | ashtarak | dilijan | sisian | alaverdi | stepanavan | martuni | spitak | vardenis | yeghvard | vedi | byureghavan | nor hachn | metsamor | berd | yeghegnadzor | tashir | kajaran | aparan | vayk | maralik | noyemberyan | talin | jermuk | meghri | ayrum | akhtala | tumanyan | tsaghkadzor | shirak | lori | armavir | kotayk | syunik | kotayk | armavir | ararat | tavush | gegharkunik | syunik | kotayk | ararat | ararat | shirak | gegharkunik | aragatsotn | tavush | syunik | lori | lori | gegharkunik | lori | gegharkunik | kotayk | ararat | kotayk | kotayk | armavir | tavush | vayots dzor | lori | syunik | aragatsotn | vayots dzor | gegharkunik | shirak | tavush | aragatsotn | vayots dzor | syunik | tavush | lori | lori | kotayk ....