AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

PVC Pipe - Polyvinyl chloride Material Testing
 
 
 
 
  • pvc Plastic Composition Testing lab, pvc plastic analysis, pvc plastic products testing lab, pvc Plastic product failure analysis, pvc Plastic identification lab, pvc Plastic testing services, pvc Plastic grade identification lab, pvc Plastic product testing services, pvc Plastic Testing Laboratory
  •  
     
    PVC electrical conduit pipe Testing Lab
     
    PVC electrical conduit pipes Testing (IS:9537 & IS:3419)
     
  • 1 Dimensional Test
  • 2 Compression Test
  • 3 Impact Test
  • 4 Resistance to Heat
  • 5 Resistance to burning
  • 6 Electreical strength
  • 7 Insulation Resistance
  •  
    CPVC Pipe Testing Lab
     
    CPVC Pipe Testing (IS:15778 & ASTM 2846)
     
  • 1 Tensile strength
  • 2 Length
  • 3 Density
  • 4 Flattening Test
  • 5 Wall thickness
  • 6 Reversion
  • 7 Resistance to external blows
  • 8 i)Acceptance Test (20˚C/hr)
  • 9 ii) Type Test (95˚C/165 hr)
  •  
    UPVC Pipe Testing Lab
     
    UPVC Pipe Testing (IS:4985 & ASTM D 1784,ASTM D 1785. ASTM D 2444 & ASTM D 1599)
     
  • 1 Drop Impact Test
  • 2 Flattening Test
  • 3 Hydrostatic Burst Test
  •  
    Physical and Mechanical properties of PVC Plastic Testing Lab
     
  • • Processing temperature range, °C -Injection
  • • Tensile strength at break, psi - D638
  • • Elongation at break, % - D638
  • • Tensile yield strength, psi - D638
  • • Compressive strength (rupture or yield) psi - D695
  • • Flexural strength (rupture or yield) psi - D790
  • • Tensile modulus, 103 psi - D638
  • • Compressive modulus, 103 psi - D695
  • • Flexural modulus, 103 psi (23°C) - D790
  • • Izod Impact, ft·lb/in of notch - D256A
  • • Hardness Shore D - D2240
  • • Deflection temperature °C 264 psi - D648
  • • Specific gravity (g/cm3) - D792
  • • Water Absorption, % (24 hrs.) - D570
  • • Dielectric strength short time, v/mil - D149
  •  
    Physical and Mechanical properties of Plastic Testing Lab
     
  • • Plastic identification testing
  • • Flammability testing
  • • Length of flame testing
  • • Heat cycle resistance testing
  • • Heat aging testing
  • • Chemical resistance testing
  • • Impact resistance testing
  • • Water resistance Odour testing
  • • Fading resistance testing
  • • Weather ability testing
  • • Suction testing
  • • Falling ball testing
  • • Wear resistance testing
  •  
    Types of Plastics Testing Offered:
     
  • • ABS Plastic Testing Lab
  • • Polypropylene Testing
  • • Polyethylene Testing
  • • PVC Testing lab
  • • Nylon 6-6 Testing lab
  • • PTFE Testing Services
  • • PET Testing Services
  • • ABS/PC alloys Plastic Testing Lab
  • • Acetal Plastic Testing Lab
  • • Acrylic Testing Lab
  • • Acrylic-styrene copolymer
  • • Acrylonitrile
  • • Cellulose Acetate
  • • Cellulose Acetate Butanal
  • • Cellulose Acetate Propionate
  • • Chlorinated polyethylene
  • • Epoxy resins
  • • Ethylene vinyl alcohol
  • • Fluoroplastic – PTFE
  • • Fluoroplastic – FEP
  • • Fluoroplastic – PVDF
  • • Ionomer
  • • Polyacrylether ketone
  • • Polyetheether ketone
  • • Liquid Crystal Polymer
  • • Melamine formaldehyde
  • • Phenolics
  • • Nylon 6
  • • Nylon 6/6
  • • Nylon 6/10
  • • Nylon 6/12
  • • Nylon 4/6
  • • Nylon 11
  • • Nylon 12
  • • Aromatic polyamide
  • • Polyamide-Polyimide
  • • Polyethylene and copolymers
  • • Polycarbonate
  • • Polybutylene Terephthalate
  • • Polycyclohexene dimethanol terephthalate
  • • PET: Polyethylene terephthalate
  • • PET/ PC blends
  • • Polyetherimide
  • • Polyethersulfone
  • • Polyimide
  • • Polymethylpentene
  • • Polyphenylene oxide
  • • Polyphenylene sulfide
  • • Polyphthalamide
  • • Polypropylene and copolymers
  • • Polystyrene and copolymers
  • • Polyurethanes
  • • Polyvinylidene chloride
  • • Silicones
  • • Polysulfones
  • • Polyethersulfones
  • • Polyureas
  • • PVC: Polyvinyl chloride
  • • Polyvinylchloride (chlorinated)
  •  
    Types of Plastics Testing Lab
     
  • • Polyarylate plastic testing lab
  • • Polyurethane (PUR) plastic testing lab
  • • Acrylonitrile Ethylene Styrene (AES) plastic testing lab
  • • Polyaryletherketone (PAEK) plastic testing lab
  • • Polyethylene (PE) plastic testing lab
  • • Thermoplastic Elastomer (TPE) plastic testing lab
  • • Polyurethane Thermoset Elastomer (TSU) plastic testing lab
  • • Acrylonitrile Styrene (AS) plastic testing alab
  • • Acrylonitrile Styrene Acrylate (ASA) plastic testing lab
  • • Polybutadiene Rubber (PBR) plastic testing lab
  • • SiliconeAlphamethylstyrene (AMS) plastic testing lab
  • • Polycaprolactone (PCL) plastic testing lab
  • • Styrene Acrylonitrile (SAN) plastic testing lab
  • • Biodegradable Polymers plastic testing lab
  • • Styrene Acrylonitrile Silicone (SAS) plastic testing lab
  • • Cellulose Acetate (CA) plastic testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab
  • • Diallyl Phthalate (DAP) plastic testing lab
  • • Polyether Imide (PEI) plastic testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab
  • • Dicyclopentadiene (DCPD) plastic testing lab
  • • Epoxy plastic testing and analysis lab
  • • Polyethylene Naphthalate (PEN) plastic testing lab
  • • Thermoplastic Polyurethane (TPU) plastic testing lab
  • • Fluoropolymer plastic testing lab
  • • Polyimide (PI) plastic testing lab
  • • FuranPolylactic Acid (PLA) plastic testing lab
  • • Thermoset (TS) plastic testing lab
  • • Ionomer plastic testing lab
  • • Polymethylpentene (PMP) plastic testing lab
  • • Thermoset Elastomer (TSE) plastic testing lab
  • • Polyphenylene Ether (PPE) plastic testing lab
  • • Vinyl Alcohol (VOH) plastic testing lab
  • • Methyl Cellulose (MC) plastic testing lab
  • • Polyphenylene Sulfide (PPS) plastic testing lab
  • • Methyl Methacrylate (MM) plastic testing lab
  •  
    POLYMER PRODUCTS TESTING LAB
     
  • • Polyarylate polymer testing lab
  • • Polyurethane (PUR) polymer testing lab
  • • Acrylonitrile Ethylene Styrene (AES) polymer testing lab
  • • Polyaryletherketone (PAEK) polymer testing lab
  • • Polyethylene (PE) polymer testing lab
  • • Thermopolymer Elastomer (TPE) polymer testing lab
  • • Polyurethane Thermoset Elastomer (TSU) polymer testing lab
  • • Acrylonitrile Styrene (AS) polymer testing lab
  • • Acrylonitrile Styrene Acrylate (ASA) polymer testing lab
  • • Polybutadiene Rubber (PBR) polymer testing lab
  • • SiliconeAlphamethylstyrene (AMS) polymer testing lab
  • • Polycaprolactone (PCL) polymer testing lab
  • • Styrene Acrylonitrile (SAN) polymer testing lab
  • • Biodegradable Polymers polymer testing lab
  • • Styrene Acrylonitrile Silicone (SAS) polymer testing lab
  • • Cellulose Acetate (CA) polymer testing lab
  • • PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab
  • • Diallyl Phthalate (DAP) polymer testing lab
  • • Polyether Imide (PEI) polymer testing lab
  • • Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab
  • • Dicyclopentadiene (DCPD) polymer testing lab
  • • Epoxy polymer testing lab
  • • Polyethylene Naphthalate (PEN) polymer testing lab
  • • Thermopolymer Polyurethane (TPU) polymer testing lab
  • • Fluoropolymer polymer testing lab
  • • Polyimide (PI) polymer testing lab
  • • FuranPolylactic Acid (PLA) polymer testing lab
  • • Thermoset (TS) polymer testing lab
  • • Ionomer polymer testing lab
  • • Polymethylpentene (PMP) polymer testing lab
  • • Thermoset Elastomer (TSE) polymer testing lab
  • • Polyphenylene Ether (PPE) polymer testing lab
  • • Vinyl Alcohol (VOH) polymer testing lab
  • • Methyl Cellulose (MC) polymer testing lab
  • • Polyphenylene Sulfide (PPS) polymer testing lab
  • • Methyl Methacrylate (MM) polymer testing lab
  • • Polymer product testing lab
  • • Polymer failure analysis lab
  • • Polymer reverse engineering lab
  • • Polymer analytical testing lab
  • • Mechanical testing of polymer lab
  • • polymers product testing lab
  • • Tensile testing of polymer lab
  • • Compression testing lab
  • • Bend testing O polymer lab
  • • Chemical analysis of polymer lab
  • • Physical testing of polymer lab
  • • FTIR analysis of polymer lab
  • • Polymer testing laboratory services
  • • Thermal analysis of polymer lab
  • • DSC Analysis of polymer lab
  • • Failure analysis of polymer lab
  • • Flexural testing lab
  • • Shear testing lab
  • • Intrinsic viscosity of polymers lab
  • • Inherent viscosity of polymers lab
  • • Relative viscosity of polymers lab
  • • Failure Analysis of lab
  • • Polymer testing lab
  •  
    RUBBER PRODUCTS TESTING LAB
     
  • • Rubber gaskets testing lab
  • • Rubber pads testing lab
  • • Rubber O- Rings testing lab
  • • Rubber granules testing lab
  • • Rubber sponges testing lab
  • • Rubber corks testing lab
  • • Rubber tires testing lab
  • • Rubber seals testing lab
  • • Rubber mats testing lab
  • • Rubber automotive parts testing lab
  • • Rubber aerospace parts testing lab
  • • Other Rubber products testing lab
  • • Rubber shoes testing lab
  • • Rubber soles testing lab
  • • Rubber gloves testing lab
  • • Rubber bellows testing lab
  • • Allied rubber products testing lab
  • • Testing and analysis of crumb rubber
  • • Rubber degradation studies
  • • Rubber compound analysis
  • • Rubber product reverse engineering
  • • Rubber material identification
  •  
    Types of Rubber Tested
     
  • • Natural rubber (NR)
  • • Synthetic Polyisporene (IR)
  • • Butyl rubber
  • • Chlorobutyl rubber (CR)
  • • Bromo butyl rubber
  • • Polybutadiene
  • • Styrene-butadiene rubber (SBR)
  • • Nitrile butadiene rubber (NBR)
  • • Hydrogenated nitrile-butadiene rubber
  • • Carboxylated nitrile butadiene rubber
  • • Chloroprene rubber
  • • Ethylene propylene rubber (EPM)
  • • Ethylene propylene diene rubber (EPDM)
  • • Epichlorohydrin rubber
  • • Polyacrylic rubber
  • • Silicone rubber
  • • Fluorosilicones
  • • Fluorphosphazene
  • • Fluorinated elastomer - Viton
  • • Fluorinated elastomer - Aflas
  • • Fluorinated elastomer - Kalrez
  • • Polysulfides
  • • Polyether block amides
  • • Chlorosulfonated polyethylene (Hypalon)
  • • Ethylene vinyl acetate (EVA)
  •  
    Thermoplastic Elastomers Tested
     
  • • Polyolefin
  • • Copolyester-ether
  • • Polyester
  • • Styrene-Butadiene block copolymers
  • • Sytrene-Ethylene block copolymers
  • • Polyester polyurethane
  • • Polyether polyurethane
  •  
    RUBBER, PLASTIC, Sponge , Vinyl FOAM , Flexible Material Testing
     
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM 1149)
  • Cracking Outdoors (ASTM d1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Izod Impact Strength (ASTM D256)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Rubber and flexible Thermoplastic materials
  • Hardness (Durometer) (ASTM D 2240)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Tear Resistance (ASTM D 624)
  • Compression Set Method B (ASTM D 395)
  • Compression Set at Low Temperature (ASTM D 1229)
  • Compression Deflection (ASTM D 575)
  • Accelerated ageing tests –Heat ageing (ASTM D 573)
  • Fuel / Chemical Resistance of Rubber ASTM D 471-98e2
  • Adhesion to a Flexible Substrate (ASTM D 413)
  • Adhesion to a Rigid Substrate (ASTM D 429)
  • Abrasion Resistance (Rotary Drum Abrader) ASTM D5963-04
  • Crack growth – De mattia (ASTM D813 - ASTM D430)
  • Rebound Resilience – Vertical ( ASTM D2632)
  • Ozone Cracking – Static (ASTM1149)
  • Cracking Outdoors (ASTMd1171)
  • Cracking – Dynamic (ASTM D3395)
  • Low Temperature testing
  • Surface and volume Resistivity of insulating materials (ASTM D257)
  • Volume Resistivity of Electrically conductive and antistatic products (ASTM D 991)
  • Identification by Infrared - Rubber (ASTM D 3677)
  • Identification by Infrared – Rubber Chemicals(ASTM D2702-05)
  • Melting Point / Range of Rubber chemicals
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Material - Sponge or Expanded Rubber ASTM D1056-00
  • Chemical Analysis of Rubber compound ( ASTM D297)
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Tg by DSC technique (ASTM D7426-08(2013)
  • Determination of IRHD of rubber (ASTM D3418-15)
  • UV weatherability test for rubber: (ASTM D750-12, ASTM D1148-13)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • Tests on plastics materials and products
  • Hardness (Durometer) (ASTM D 2240)
  • Rockwell Hardness (ASTM D 785)
  • Tensile Properties (ASTM 638)
  • Tensile, Elongation and Modulus Properties (ASTM D 412)
  • Charpy Impact Strength( ASTM D6110)
  • Density and Specific Gravity (ASTM D 792)
  • Melt Flow Rate or Melt Flow Index (ASTM D 1238)
  • Vicat Softening temperature of plastics (ASTM D1525)
  • Deflection Temperature of Plastic ( ASTM D0648)
  • Rate of Burning and/or Extent and Time of Burning (ASTM D0635)
  • Resistance of Plastics to Chemical Reagents ( ASTM D0543)
  • Water Absorption of Plastics (ASTM D0570)
  • Tear Resistance (Graves Tear) of Plastic Film and Sheeting (ASTM D1004)
  • Carbon Black content In Olefin Plastics (ASTM D1603)
  • Identification of Polymer by Infrared Spectrophotometry
  • Thermogravimetric analysis (TGA) ASTM D6370-99 (2014)
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Testing for Dielectric Breakdown voltage and Dielectric Strength (ASTM D149-09(2013)
  • UV weatherability test for Plastics
  • Determination of Temperature of Crystallisation and Melting of plastics by DSC technique (ASTM D3418-15)
  • Tests on Foam and Sponges
  • Testing of Flexible Cellular Materials - Latex Foam D1055-04
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  • Testing of Flexible Cellular Materials - Sponge or Expanded Rubber ASTM D1056-00
  • Testing of Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) ASTM D1667-97
  •  
    Types of Material Testing Lab
     
    pvc material testing lab in albania , pvc pipe testing lab in albania , rubber testing lab in albania , polymer testing lab in albania , latex testing lab in albania , plastic testing lab in albania , abs plastic testing lab in albania , packaging material testing lab in albania , food packaging material testing lab in albania , civil material testing lab in albania , construction material testing lab in albania , spring testing lab in albania , wood testing lab in albania , paint testing lab in albania , bricks testing lab in albania , resin testing lab in albania , thermoplastic testing lab in albania , foam testing lab in albania , sponge testing lab in albania , heavy metal testing in albania , coal testing lab in albania , coal coke testing in albania , thermal coal testing in albania , metallurgical coke testing in albania , petrolium coke testing in albania , fertilizer testing in albania , cement testing lab in albania , fly ash testing in albania , aggregates testing lab in albania , rock testing lab in albania , textile testing lab in albania , fabric and garment testing lab in albania , fabric testing lab in albania , asphalt testing lab in albania , uts utm testing in albania , triaxial rock testing in albania ...
     
    Types of Plastics Testing Lab
     
    Polyarylate plastic testing lab in albania , Polyurethane (PUR) plastic testing lab in albania , Acrylonitrile Ethylene Styrene (AES) plastic testing lab in albania , Polyaryletherketone (PAEK) plastic testing lab in albania , Polyethylene (PE) plastic testing lab in albania , Thermoplastic Elastomer (TPE) plastic testing lab in albania , Polyurethane Thermoset Elastomer (TSU) plastic testing lab in albania , Acrylonitrile Styrene (AS) plastic testing alab in albania , Acrylonitrile Styrene Acrylate (ASA) plastic testing lab in albania , Polybutadiene Rubber (PBR) plastic testing lab in albania , SiliconeAlphamethylstyrene (AMS) plastic testing lab in albania , Polycaprolactone (PCL) plastic testing lab in albania , Styrene Acrylonitrile (SAN) plastic testing lab in albania , Biodegradable Polymers plastic testing lab in albania , Styrene Acrylonitrile Silicone (SAS) plastic testing lab in albania , Cellulose Acetate (CA) plastic testing lab in albania , PolyesterStyrene Maleic Anhydride (SMA) plastic testing lab in albania , Diallyl Phthalate (DAP) plastic testing lab in albania , Polyether Imide (PEI) plastic testing lab in albania , Styrenic Vinyl Acrylonitrile (SVA) plastic testing lab in albania , Dicyclopentadiene (DCPD) plastic testing lab in albania , Epoxy plastic testing and analysis lab in albania , Polyethylene Naphthalate (PEN) plastic testing lab in albania , Thermoplastic Polyurethane (TPU) plastic testing lab in albania , Fluoropolymer plastic testing lab in albania , Polyimide (PI) plastic testing lab in albania , FuranPolylactic Acid (PLA) plastic testing lab in albania , Thermoset (TS) plastic testing lab in albania , Ionomer plastic testing lab in albania , Polymethylpentene (PMP) plastic testing lab in albania , Thermoset Elastomer (TSE) plastic testing lab in albania , Polyphenylene Ether (PPE) plastic testing lab in albania , Vinyl Alcohol (VOH) plastic testing lab in albania , Methyl Cellulose (MC) plastic testing lab in albania , Polyphenylene Sulfide (PPS) plastic testing lab in albania , Methyl Methacrylate (MM) plastic testing lab in albania ...
     
    POLYMER PRODUCTS TESTING LAB
     
    Polyarylate polymer testing lab in albania , Polyurethane (PUR) polymer testing lab in albania , Acrylonitrile Ethylene Styrene (AES) polymer testing lab in albania , Polyaryletherketone (PAEK) polymer testing lab in albania , Polyethylene (PE) polymer testing lab in albania , Thermopolymer Elastomer (TPE) polymer testing lab in albania , Polyurethane Thermoset Elastomer (TSU) polymer testing lab in albania , Acrylonitrile Styrene (AS) polymer testing lab in albania , Acrylonitrile Styrene Acrylate (ASA) polymer testing lab in albania , Polybutadiene Rubber (PBR) polymer testing lab in albania , SiliconeAlphamethylstyrene (AMS) polymer testing lab in albania , Polycaprolactone (PCL) polymer testing lab in albania , Styrene Acrylonitrile (SAN) polymer testing lab in albania , Biodegradable Polymers polymer testing lab in albania , Styrene Acrylonitrile Silicone (SAS) polymer testing lab in albania , Cellulose Acetate (CA) polymer testing lab in albania , PolyesterStyrene Maleic Anhydride (SMA) polymer testing lab in albania , Diallyl Phthalate (DAP) polymer testing lab in albania , Polyether Imide (PEI) polymer testing lab in albania , Styrenic Vinyl Acrylonitrile (SVA) polymer testing lab in albania , Dicyclopentadiene (DCPD) polymer testing lab in albania , Epoxy polymer testing lab in albania , Polyethylene Naphthalate (PEN) polymer testing lab in albania , Thermopolymer Polyurethane (TPU) polymer testing lab in albania , Fluoropolymer polymer testing lab in albania , Polyimide (PI) polymer testing lab in albania , FuranPolylactic Acid (PLA) polymer testing lab in albania , Thermoset (TS) polymer testing lab in albania , Ionomer polymer testing lab in albania , Polymethylpentene (PMP) polymer testing lab in albania , Thermoset Elastomer (TSE) polymer testing lab in albania , Polyphenylene Ether (PPE) polymer testing lab in albania , Vinyl Alcohol (VOH) polymer testing lab in albania , Methyl Cellulose (MC) polymer testing lab in albania , Polyphenylene Sulfide (PPS) polymer testing lab in albania , Methyl Methacrylate (MM) polymer testing lab in albania , Polymer product testing lab in albania , Polymer failure analysis lab in albania , Polymer reverse engineering lab in albania , Polymer analytical testing lab in albania , Mechanical testing of polymer lab in albania , polymers product testing lab in albania , Tensile testing of polymer lab in albania , Compression testing lab in albania , Bend testing O polymer lab in albania , Chemical analysis of polymer lab in albania , Physical testing of polymer lab in albania , FTIR analysis of polymer lab in albania , Polymer testing laboratory services Thermal analysis of polymer lab in albania , DSC Analysis of polymer lab in albania , Failure analysis of polymer lab in albania , Flexural testing lab in albania , Shear testing lab in albania , Intrinsic viscosity of polymers lab in albania , Inherent viscosity of polymers lab in albania , Relative viscosity of polymers lab in albania , Failure Analysis of lab in albania , Polymer testing lab in albania ...
     
    RUBBER PRODUCTS TESTING LAB
     
    Rubber gaskets testing lab in albania , Rubber pads testing lab in albania , Rubber O- Rings testing lab in albania , Rubber granules testing lab in albania , Rubber sponges testing lab in albania , Rubber corks testing lab in albania , Rubber tires testing lab in albania , Rubber seals testing lab in albania , Rubber mats testing lab in albania , Rubber automotive parts testing lab in albania , Rubber aerospace parts testing lab in albania , Other Rubber products testing lab in albania , Rubber shoes testing lab in albania , Rubber soles testing lab in albania , Rubber gloves testing lab in albania , Rubber bellows testing lab in albania , Allied rubber products testing lab in albania , Testing and analysis of crumb rubber in albania , Rubber degradation studies in albania , Rubber compound analysis in albania , Rubber product reverse engineering in albania , Rubber material identification in albania ...
     
    Types of Rubber Testing Lab
     
    Natural rubber (NR) in albania , Synthetic Polyisporene (IR) in albania , Butyl rubber in albania , Chlorobutyl rubber (CR) in albania , Bromo butyl rubber in albania , Polybutadiene in albania , Styrene-butadiene rubber (SBR) in albania , Nitrile butadiene rubber (NBR) in albania , Hydrogenated nitrile-butadiene rubber in albania , Carboxylated nitrile butadiene rubber in albania , Chloroprene rubber in albania , Ethylene propylene rubber (EPM) in albania , Ethylene propylene diene rubber (EPDM) in albania , Epichlorohydrin rubber in albania , Polyacrylic rubber in albania , Silicone rubber in albania , Fluorosilicones in albania , Fluorphosphazene in albania , Fluorinated elastomer - Viton in albania , Fluorinated elastomer - Aflas in albania , Fluorinated elastomer - Kalrez in albania , Polysulfides in albania , Polyether block amides in albania , Chlorosulfonated polyethylene (Hypalon) Ethylene vinyl acetate (EVA) in albania ...
     
    list of our services following cities
     
    bajram curri | bajzë | ballsh | berat | bilisht | bulqizë | burrel | cërrik | çorovodë | delvinë | divjakë | durrës | elbasan | ersekë | fier | fierzë | finiq | fushë-arrëz | fushë-krujë | gjirokastër | gramsh | himarë | kamëz | kavajë | këlcyrë | klos | konispol | koplik | korçë | krastë | krrabë | krujë | krumë | kuçovë | kukës | kurbnesh | laç | leskovik | lezhë | libohovë | librazhd | lushnjë | maliq | mamurras | manëz | memaliaj | milot | orikum | patos | peqin | përmet | peshkopi | pogradec | poliçan | prrenjas | pukë | reps | roskovec | rrëshen | rrogozhinë | rubik | sarandë | selenicë | shëngjin | shijak | shkodër | sukth | tepelenë | tirana | ulëz | ura vajgurore | vau i dejës | vlorë | vorë ....