AN ISO/IEC - 17025 STANDARD - NABL ACCREDITATION LABORATORY / TRAINING AND CERTIFICATION - MECH - CIVIL - ELECTRICAL & IT COURSES / A to Z LABORATORY TESTING SERVICES / INSPECTION SERVICES / ALL ENGINEERING CONTRACTORS / MORE THAN 1500 SERVICES ...

ASPHALT TESTING
 
 
 
ASPHALT DESIGN TESTING
 
  • • Cold-in-Place Recycling Mix Design
  • • Disc-shaped Compact Tension testing (DCT)
  • • Falling Weight Deflectometer testing (FWD)
  • • Foamed Asphalt Mix Design
  • • Ground Penetrating Radar
  • • Hamburg Wheel Rut testing
  • • Low Temperature Cracking (AASHTO T322/ASTM 6931)
  • • Resilient Modulus testing/Dynamic Modulus testing (SPT)
  • • R-Value and CBR testing
  • • Semi-Circular Bending Test (SCB)
  • • Stabilized Full Depth Reclamation Mix Design
  • • SuperPave Mix Design
  • • Tensile Strength Ratio testing (TSR)
  •  
    Bitumen Asphalt Testing Equipments
     
  • • Ring And Ball Apparatus
  • • Standard Penetrometer
  • • Digital Penetrometer
  • • Stripping Value Apparatus
  • • Centrifuge Extractor – Hand Operated
  • • Centrifuge Extractor – Motorized
  • • Kinematic Viscometer BathSay
  • • Bolt ViscometerStandard Tar Viscometer
  • • Marshall Stability Test Apparatus
  • • Mixer With Heating Jacket
  • • Ductility Testing Apparatus
  • • Elastic Recovery MouldS
  • • Traight Edge (3 Meters)
  • • Benkelman Beam
  • • Pavement Core Drilling Machine
  • • Automatic Compactor For Bituminous Mixes
  • • Loss On Heating/Thin Film Oven
  • • Rolling Thin Film Oven
  •  
    Asphalt Testing Sample Preparation
     
  • • Mark the core sample locations before positioning the coring equipment.
  •  
  • • Asphalt concrete may have to be cooled before sampling to reduce the possibility of damage to the core. If the asphalt concrete is 25 mm or less in thickness, place a piece of dry ice 250 mm x 250 mm x 25 mm on the selected site for ten minutes before coring. For each additional 25 mm of asphalt concrete thickness, an additional 5 minutes of cooling time is required.
  •  
    Asphalt Testing Procedure
     
  • • Position the core drill with the core barrel perpendicular to the asphalt concrete surface at the specified sampling location.
  •  
  • • Turn on the core barrel cooling equipment and lower the rotating barrel steadily with just sufficient pressure to start cutting. When the core barrel projects through the asphalt concrete, stop the barrel rotation and turn off the cooling equipment. Raise the core barrel and remove the core from the hole using core retrieval equipment.
  •  
  • • If coring with water, wipe the cores immediately with a dry towel to minimize water absorption into the core.
  •  
  • • Identify the core by sample number. All other sample documentation as described in 2.4 should be recorded and submitted with the core samples.
  •  
  • • Immediately after cores are removed from the road surface and they have been marked for sample number, they will be placed in an insulated container which is equipped to maintain the temperature of the cores at 10o C or colder until delivered to the specified laboratory for testing.
  •  
  • • Backfill the core holes with hot asphalt mix and compact with hand held Marshall Compaction hammer. Core holes shall be dry and clean prior to backfilling.
  •  
    BRICKS TESTING
     
    BRICKS TESTING PARAMETERS and STANDARDS
     
  • 1. Apparent Porosity and Density
  • 2. Water Absorption Test
  • 3. Permanent Linear Change Test
  • 4. Abrasion Resistance Test
  • 5. Creep Deformation Test
  • 6. Modulus of Rapture
  • 7. Fly ash / Lime Brick Test
  •  
    1. Apparent Porosity and Density:
     
  • This test helps in determining the porosity and density of bricks to be used for the construction of load-bearing walls. The method involves measurement of dimensions and mass to determine density, followed by measuring the increase in mass when soaked in water for a standard period of time.
  • Test Method: IS: 1528 (P-8,9)1974
  •  
    2. Water Absorption Test:
     
  • In this test, we assess the amount of water that a brick can absorb is measured by the water absorption test. There is no distinct relationship between water absorption and the water-tightness of walls. The results of water absorption tests are used by the brick manufacturer for quality assurance.
  • Test Method: IS: 3495 (P-2)1992
  •  
    3. Permanent Linear Change Test:
     
  • This test helps in determining the permanent linear change of refractory brick when heated under prescribed conditions, which will measure any potential shrinking when used for load-bearing walls.
  • Test Method: IS: 1528 (P-6)1974
  •  
    4. Abrasion Resistance Test:
     
  • The abrasion resistance of a refractory material provides an indication of its suitability for service in abrasion or erosive environments.
  • Test Method:IS: 5688-1982
  •  
    5. Creep Deformation Test:
     
  • Creep in compression (CIC) refers to the percentage of shrinkage of a refractory test piece under a constant load and exposed to a constant high temperature over a long period of time.
  • Test Method: IS: 1528 (P-18) 1993
  •  
    6. Modulus of Rapture:
     
  • The modulus of rupture (MOR) is the maximum surface stress in a bent beam at the instance of failure. One might expect this to be exactly the same as the strength measured in tension, but it is always larger because the volume subjected to this maximum stress is small, and the probability of a large flaw lying in the highly stressed region is also small.
  • Test Method: IS: 1528 (P-15)1991, IS: 1528 (P-5)1993
  •  
    7. Fly ash / Lime Brick Test:
     
  • This test helps in determining the strength of fly ash/lime bricks.
  • Test method: IS: 13757 / IS: 12894
  •  
    TILE TESTING LAB (Tils, Ceramics, Granites, Marbles Testing)
     
    List of Tiles material
     
  • Tiles Testing Services
  • Ceramic Testing Services
  • Granite Testing Services
  • Marble Testing Services
  • designers Tiles Testing Services
  • Parking Tiles Testing Services
  • Cool Roof Tiles Testing Services
  • paver Blocks Testing Services
  • Ceramic Tiles Testing Services
  • Vitrified Ceramic Testing Services
  • Vitrified Tile Testing Services
  • sandstone Testing Services
  • Slate Testing Services
  • Slip and Skid Resistance Testing Services
  • Ceramic Tile Testing Services
  • Porcelain Tile Testing Services
  • Glass Tile Testing Services
  • Cement Tile Testing Services
  • Marble Tile Testing Services
  • Mosaic Tile Testing Services
  • Granite Tile Testing Services
  • Limestone Tile Testing Services
  • Travertine Tile Testing Services
  • Quarry Tile Testing Services
  • Metal Tile Testing Services
  • Resin Tile Testing Services
  •  
    Tile Testing Parameters
     
  • 1. Dimension
  • 2. Flexural strength
  • 3. Flexural strength
  • 4. Surface quality
  • 5. Breaking strength
  • 6. Abrasion resistance
  • 7. Compressive strength
  • 8. Impact resistance
  • 9. Thermal expansion
  • 10.Chemical resistance
  • 11. Bulk density
  • 12. Staining resistance
  •  
    Tiles - Parking Tiles - Cool Roof Tiles Standard
     
  • A. Tiles, Parking Tiles, Cool Roof Tiles(as per IS:1237/IS:13801 /ASTM:C-1549/ASTM:C-1371/ASTM:E-1980)
  •  
  • 1. Water Absorption
  • 2. Abrasion Resistance/Wear Resistance
  • 3. Wet Transverse Strength
  • 4. Flatness(concavity and convexity)
  • 5. Perpendicularity
  • 6. Straightness
  • 7. BFS Content in cement tiles
  • 8. Solar Reflectance,Solar Absorptance,Thermal Emissivity and Solar Reflectance Index (SRI Value)
  • 9. Thermal Conductivity
  • 10. XRD, XRF,SEM,TEM,PSA
  •  
    Granites - Marbles - Sandstones - Slates Standards
     
  • Granites , Marbles , Sandstones , Slates (as per ASTM:615/IS:1121/IS:1130/IS:1706)
  •  
  • 1. Absorption, Sp. Gravity, Density - ASTM : C-97
  • 2. Abrasion Resistance - IS:1706 /IS :1237
  • 3. Flexural Strength - ASTM :C-880
  • 4. Modulus of Rupture - ASTM :C-99
  • 5. Compressive Strength - ASTM:C-170
  • 6. Moh's Scale of Hardness - IS:13630(part-13)
  • 7. Petrology/petrography - BS/EN:12407
  • 8. Tensile Strength - IS:1121
  • 9. Shear Strength - IS:1121
  • 10.Slip/Skid Resistance - BS:7976/ASTM:E-303-Laboratory/On-site
  •  
    Vitrified , Ceramic Tiles Standards
     
  • Vitrified/Ceramic Tiles(as per IS:15622/IS:13630)
  •  
  • 1. Dimension and Surface Quality
  • 2. Water Absorption
  • 3. Modulus of Rupture
  • 4. Abrasion Resistance
  • 5 Chemical/Stain Resistance
  • 6. Moh's Scale of Hardness
  •  
    Paver Blocks Standards
     
  • Paver Blocks (as per IS: 15658)
  •  
  • 1. Water Absorption
  • 2. Flexural Strength
  • 3. Compressive Strength
  •  
    Ceramics Testing
     
     
  • Ceramics are composed of compounds of metals and non metals and may be crystalline or partly crystalline. They are characterized as brittle, hard, strong in compression, and weak in shearing, tension and impact. These materials are also very resistant to both corrosion and very high temperatures and can be designed to either insulate against or selected to conduct electricity. Ceramics have a wide range of applications most notably in industries that require materials to withstand large compressive forces or intense heat exposure for extended periods of time.
  •  
    Ceramics Testing Applications:
     
  • Testing ceramics helps determine if they are suited for specific applications. Typically this involves a series of tests to measure the material’s mechanical properties. These properties include the yield strength, ultimate strength, tensile strength, compressive strength, flexural strength, fracture strength, hardness, fracture resistance and creep rate. With the knowledge of these values the behavior that is expected from the ceramic during the application can be predicted and it can be shown if it will succeed or fail.
  •  
    Common Ceramics Test Methods:
     
  • There are many different tests that can be performed upon ceramics but the most common and important are those that involve compression, tension, flexural, and fracture mechanics. Because of the way that ceramics are constructed they generally posses vary high compressive strengths and will most often fail due to tensile, flexural or fracture forces; therefore it is very important to test these properties. Each property may also be tested using conventional methods, creep mechanics or cyclic (fatigue) methods.
  • GRANITE TESTING
     
     
  • IS - 1121 (Part1-4): 1974 - determination of Compressive Strength, Transverse Strength, Tensile Strength, and Shear Strength
  •  
  • ASTM C 170 - Compressive Strength / ASTM C 241 - Abrasion Resistance
  •  
  • Water Obsorbtion : EN - 13755
  • Density : EN - 1936
  • Absorbtion Resistance : EN - 13415
  • Flexural Strength : EN - 12371 and 72
  • Skid Resistance : EN - 14231
  •  
    Soil Testing Services
     
    CBR In Situ Soil Testing Services in albania , CBR Laboratory, Soaked Single Point Soil Testing Services in albania , Chloride Content Soil Testing Services in albania , Electrical Resistivity Soil Testing Services in albania , Linear Shrinkage Soil Testing Services in albania , Modified Procter Compaction Test Soil Testing Services in albania , Organic Matter Content Soil Testing Services in albania , Particle Size Distribution by Hygrometer, Sieve Analysis and Hygrometer Soil Testing Services in albania ,
     
    Concrete Testing Services
     
    Chloride Content, Permeability and Ponding Concrete Testing in albania , Core Compressive Strength Concrete Testing in albania , Coring: 10cm and 15cm diameter Concrete Testing in albania , Cube Compressive Strength Concrete Testing in albania , Depth of Carbonation Concrete Testing in albania , Drying Shrinkage/ wetting Expansion Concrete Testing in albania , Flexural Strength Concrete Testing in albania , Hammer Sounding Concrete Testing in albania , Porosity Concrete Testing in albania , Rebound Hammer Survey Concrete Testing in albania , Sulphate Content Concrete Testing in albania , Ultrasonic Survey Concrete Testing in albania , Water Absorption and penetration Concrete Testing in albania ,
     
    Bitumen Testing Services
     
    Bitumen Content Bitumen Testing in albania , Bitumen Penetration Bitumen Testing in albania , Flash Point Bitumen Testing in albania , Specific Gravity Bitumen Testing in albania , Softening Point Bitumen Testing in albania , Paraffin Wax Bitumen Testing in albania , Loss on Heating Bitumen Testing in albania , Water Content Bitumen Testing in albania , Ductility Test Bitumen Testing in albania , Bitumen Emulsion Bitumen Testing in albania ,
     
    Concrete Mix Design services
     
    Abrasion Resistance Concrete Mix Design services in albania , Abrasion Value Concrete Mix Design services in albania , Accelerated Cube Strength Concrete Mix Design services in albania , Air Content & Alkali Content Concrete Mix Design services in albania , Bleeding Test Concrete Mix Design services in albania , Block Density Concrete Mix Design services in albania , Bridge Load Test Concrete Mix Design services in albania , Compressive Strength Concrete Mix Design services in albania , Core Cutting Concrete Mix Design services in albania , Permeability Test Concrete Mix Design services in albania , Rapid Chloride Penetration Test (RCPT) Concrete Mix Design services in albania , Brick Testing Services Concrete Mix Design services in albania , Apparent Porosity and Density Concrete Mix Design services in albania , Cold Crushing Strength Concrete Mix Design services in albania , Permanent Linear Change (PLC) Concrete Mix Design services in albania , Abrasion Resistance Concrete Mix Design services in albania , Creep Test Concrete Mix Design services in albania , Refractoriness under load (RUL) Concrete Mix Design services in albania , Modulus of Rapture Concrete Mix Design services in albania , Compressive Test Concrete Mix Design services in albania , Water Absorption Test Concrete Mix Design services in albania ,
     
    Tiles Testing Services
     
    Dimension Tiles Testing Services in albania , Flexural Strength Tiles Testing Services in albania , Surface Quality Tiles Testing Services in albania , Breaking Strength Tiles Testing Services in albania , Abrasion Resistance Tiles Testing Services in albania , Compressive Strength Tiles Testing Services in albania , Impact Resistance Tiles Testing Services in albania , Thermal Expansion Tiles Testing Services in albania , Chemical Resistance Tiles Testing Services in albania , Bulk Density Tiles Testing Services in albania , Staining Resistance Materials Tiles Testing Services in albania ,
     
    Mortar Testing Services
     
    In Situ Metallography Mortar Testing Services in albania , Reduced Wastage Mortar Testing Services in albania , Accurate Content of Cement Mortar Testing Services in albania , Consistent Strength and Quality Mortar Testing Services in albania , Enhanced Health and Safety on Site Mortar Testing Services in albania , Reduced Mixing and Labour Costs Mortar Testing Services in albania , Cement Testing Services Mortar Testing Services in albania , Chemical Analysis Mortar Testing Services in albania , Compressive Strength Mortar Testing Services in albania , Fineness Mortar Testing Services in albania , Heat Of Hydration Mortar Testing Services in albania , Loss On Ignition Mortar Testing Services in albania , Physical Analysis Mortar Testing Services in albania , Setting Time Mortar Testing Services in albania , Soundness Mortar Testing Services in albania ,
     
    ToR Steel Testing Services
     
    Bend Test ToR Steel Testing Services in albania , Chemical Analysis ToR Steel Testing Services in albania , Elongation ToR Steel Testing Services in albania , Ultimate Tensile Strength ToR Steel Testing Services in albania , 0.2% Proof Stress / Yield stress ToR Steel Testing Services in albania , Mass per meter Run ToR Steel Testing Services in albania , Rebend Test ToR Steel Testing Services in albania ,
     
    Ceramic Testing Services
     
    Refractories & Allied materials Ceramic Testing Services in albania , White Ware which includes Tableware, Tiles, Cookwares and Sanitary Ware Ceramic Testing Services in albania , Structural including Bricks, Pipes, and Tiles Ceramic Testing Services in albania , Engineering Ceramics Ceramic Testing Services in albania ,
     
    CIVIL - NDT TESTING SERVICES
     
    CIVIL NDT - CONCRETE TESTING SERVICES
     
    CONCRETE FOR BRIDGES, DAMS, BUILDINGS, SUBWAYS, TUNNELS ETC..
      Ultrasonic Pulse Velocity Testing in albania , Rebound Hammer Testing in albania , Rebar Locator in albania , Depth of concrete in albania , Half Cell Potential Testing in albania , Carbonation Testing in albania , Pile Integrity Testing in albania , Visual Inspection and Field Services in albania , In-Situ Compressive Strength (design strength, and existing structures) in albania ,
       
      CONSTRUCTION MATERIALS TESTING EQUIPMENTS:
       
      Pile Testing Systems in albania , Structural Monitoring Systems in albania , Asphalt Testing Systems in albania , Pavement Testing in albania , Rock and Soil Laboratory Test Systems in albania , Non-Destructive Tests for Concrete in albania , Geotechnical & Vibration Monitoring Systems in albania , Pavement Condition Monitoring in albania , Concrete and Cement Lab Systems in albania ,
       
      LAB TESTING - CONCRETE AND CONCRETING MATERIALS
       
      Laboratory Tests on Construction Materials as per Standards. in albania ,
       
      Cement in albania , Aggregate in albania , Bricks in albania , Blocks in albania , Tension test on rebars in albania , Chemical test on Rebars in albania , Water Analysis in albania , Cube test in albania , Accelerated cube test (ACT) in albania , Rapid Chloride test (RCPT) in albania , Concrete Mix Design in albania , Fly ash in albania , Slag and Silica fume in albania , Self compacting concrete in albania , Temperature controlled concrete in albania ,
       
      CIVIL NDT AND CONCRETE - TESTING SERVICES
       
      Civil NDT Investigation in albania , Concrete Investigation in albania , coating Thickness Measurement on Concrete Structures in albania , Compressive Strength Testing in albania , Concrete Mix Design in albania , Bitumen Mix Design in albania , Core extraction Testing in albania , Core Sampling Testing in albania , Concrete Core Testing in albania , Concrete Cube Testing in albania , Chemical Analysis in albania , Electrical Resistivity Testing in albania , Ground Penetrating Radar Survey in albania , Sieve Analysis in albania , Ultrasonic Low Frequency Testing in albania , UPV Testing in albania , Vibration Analysis of Building in albania , Leak Testing in albania , CT Scan on Conctete in albania , Element Analysis on Concrete in albania , Impact Echo Testing in albania , Linear Polarization Testing in albania , Load Testing in albania , Permeability Testing in albania , petrography of concrete in albania , Pullout Testing in albania , Cut and Pullout Testing (CPO Test) in albania , Impulse Response Test in albania , Impact Echo Test in albania , Ground Penetrating Radar (GPR) in albania , Crack Depth Measurement in albania ,
       
      Reinforcement Location and Corrosion Assessments
       
      Reinforcement Location by Ground Penetrating Radar (GPR) in albania , Cover Assessment in albania , Half Cell Potential Tests in albania , Resistivity Tests in albania , Corrosion Rate Assessment in albania , Carbonation Test in albania ,
       
      Repair Quality Assessment
       
      Bond Test in albania , Anchor / Rebar Pull-out Strength in albania , Chemical Tests in albania ,
       
      Types of Material Testing Laboratory
       
      asphalt testing Laboratory in albania , pvc material testing Laboratory in albania , pvc pipe testing Laboratory in albania , rubber testing Laboratory in albania , polymer testing Laboratory in albania , latex testing Laboratory in albania , plastic testing Laboratory in albania , abs plastic testing Laboratory in albania , packaging material testing Laboratory in albania , food packaging material testing Laboratory in albania , civil material testing Laboratory in albania , construction material testing Laboratory in albania , spring testing Laboratory in albania , wood testing Laboratory in albania , paint testing Laboratory in albania , bricks testing Laboratory in albania , resin testing Laboratory in albania , thermoplastic testing Laboratory in albania , foam testing Laboratory in albania , sponge testing Laboratory in albania , heavy metal testing in albania , coal testing Laboratory in albania , coal coke testing in albania , thermal coal testing in albania , metallurgical coke testing in albania , petrolium coke testing in albania , fertilizer testing in albania , cement testing Laboratory in albania , fly ash testing in albania , aggregates testing Laboratory in albania , rock testing Laboratory in albania , textile testing Laboratory in albania , fabric and garment testing Laboratory in albania , fabric testing Laboratory in albania , uts utm testing in albania , triaxial rock testing in albania ...
       
      list of our services following cities
       
      bajram curri | bajzë | ballsh | berat | bilisht | bulqizë | burrel | cërrik | çorovodë | delvinë | divjakë | durrës | elbasan | ersekë | fier | fierzë | finiq | fushë-arrëz | fushë-krujë | gjirokastër | gramsh | himarë | kamëz | kavajë | këlcyrë | klos | konispol | koplik | korçë | krastë | krrabë | krujë | krumë | kuçovë | kukës | kurbnesh | laç | leskovik | lezhë | libohovë | librazhd | lushnjë | maliq | mamurras | manëz | memaliaj | milot | orikum | patos | peqin | përmet | peshkopi | pogradec | poliçan | prrenjas | pukë | reps | roskovec | rrëshen | rrogozhinë | rubik | sarandë | selenicë | shëngjin | shijak | shkodër | sukth | tepelenë | tirana | ulëz | ura vajgurore | vau i dejës | vlorë | vorë ....